คู่มือผู้ใช้แขนมอนิเตอร์แบบสปริงแก๊ส FLEXISPOT รุ่น F8L

1. บทนำ

Thank you for choosing the FLEXISPOT F8L Gas Spring Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before use and keep it for future reference.

คุณสมบัติหลัก:

• Detachable VESA plate for easy monitor attachment.
• Adjustable height for ergonomic viewing, reducing neck, eye, and back strain.
• Wide range of motion for tilt, swivel, and rotation, allowing optimal viewมุมการเอียง
• Compact design suitable for narrow desks, enabling side-by-side monitor placement at a distance.
• Supports VESA standards: 75x75mm and 100x100mm.
• Compatible with monitors from 17" to 36" and weighing between 2-9kg.

This image shows the FLEXISPOT F8L Gas Spring Monitor Arm in white, supporting a monitor. The arm is extended, demonstrating its adjustable nature and sleek design.

2. คำแนะนำด้านความปลอดภัย

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or defective.
• Do not exceed the maximum weight capacity of 9kg (19.8 lbs) or the maximum screen size of 36 inches. Overloading can cause instability and potential injury.
• Install the monitor arm on a stable and sturdy desk surface that can support the combined weight of the arm and your monitor.
• Perform all adjustments slowly and carefully. Avoid sudden movements that could cause the monitor to swing or fall.
• ให้เด็กและสัตว์เลี้ยงอยู่ห่างจากบริเวณการติดตั้ง
• If you encounter any difficulties during installation or operation, refer to the troubleshooting section or contact customer support.

3. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบให้แน่ใจว่ามีส่วนประกอบครบถ้วนในบรรจุภัณฑ์ของคุณ:

• ชุดแขนยึดจอภาพ
• โต๊ะ Clamp ฐาน
• ฐานยึดแบบห่วง
• แผ่น VESA
• ชุดอุปกรณ์ฮาร์ดแวร์ (สกรู แหวนรอง ประแจหกเหลี่ยม)
• คลิปการจัดการสายเคเบิล
• คู่มือการใช้งาน

4. การตั้งค่าและการติดตั้ง

The FLEXISPOT F8L monitor arm supports two installation methods: C-clamp and Grommet mount. Choose the method suitable for your desk.

4.1 Choosing Your Mounting Method

This diagram illustrates the two primary ways to attach the monitor arm to your desk: the C-clamp method (bottom right) for desk edges and the grommet mount method (top right) for desks with existing cable holes. The grommet mount requires a hole size of 8.5-70mm, and both methods support a desk thickness of 20-100mm.

• ซี-ซีแอลamp ภูเขา: Ideal for desks with edges. Supports desk thickness from 20mm to 100mm.
• การติดตั้งแบบห่วง: Requires an existing hole in your desk (diameter 8.5mm to 70mm). Supports desk thickness from 20mm to 100mm.

4.2 Attaching the Monitor Arm to Your Desk

1. สำหรับซี-ซีแอลamp ภูเขา:
   • ติด C-clamp base to the main pole of the monitor arm.
   • ตำแหน่ง clamp on the edge of your desk and tighten the knob until it is securely fastened.
2. For Grommet Mount:
   • Assemble the grommet mount base and insert it through the hole in your desk.
   • Secure it from underneath the desk using the provided plate and nut.

4.3 Attaching the Monitor to the Arm

This image demonstrates the detachable VESA plate feature. The VESA plate can be easily removed from the monitor arm, allowing you to attach it to the back of your monitor first, and then slide the monitor with the plate onto the arm for a simpler installation process.

1. ติดแผ่น VESA เข้ากับจอภาพ:
   • Remove the VESA plate from the monitor arm by lifting it upwards.
   • Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
   • Secure the plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.
2. ติดตั้งจอภาพเข้ากับแขนยึด:
   • Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head until it clicks into place.
   • Ensure the monitor is securely seated before releasing มัน

5. การใช้งานและการปรับแต่ง

The FLEXISPOT F8L monitor arm offers a wide range of adjustments to achieve your optimal viewการสร้างประสบการณ์

5.1 การปรับความตึงของสปริงแก๊ส

The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth and stable movement. If the monitor sags or springs up too easily, adjust the tension screw located on the arm joint (often covered by a plastic cap).

• Use the provided Allen wrench to turn the screw.
• เปลี่ยน ตามเข็มนาฬิกา to increase tension (for heavier monitors).
• เปลี่ยน ทวนเข็มนาฬิกา to decrease tension (for lighter monitors).
• Adjust gradually until the monitor stays in position when released.

5.2 Monitor Position Adjustments

This diagram illustrates the extensive range of motion for the monitor arm, including 360° rotation, 180° horizontal swivel, and tilt adjustment from -90° to 15°. These features allow for precise positioning of your monitor.

• การปรับความสูง: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring will hold it in place.
• การปรับเอียง: Tilt the monitor screen up or down from -90° to 15° to reduce glare and optimize viewมุมอิง
• การปรับหมุน: Swivel the monitor arm horizontally up to 180° to share your screen or change viewไอเอ็นจีทิศทาง
• การปรับการหมุน: Rotate the monitor 360° between landscape and portrait orientations.

This illustration compares typical poor posture when using a fixed monitor stand (left) versus the improved ergonomic posture achievable with a monitor arm (right). By allowing flexible height and angle adjustments, the monitor arm helps reduce strain on the neck, eyes, and back.

6. การบำรุงรักษา

• Regularly check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Clean the monitor arm with a soft, damp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลายที่อาจทำลายพื้นผิวได้
• Do not lubricate the gas spring mechanism. It is designed to be maintenance-free.

7 การแก้ไขปัญหา

8. ข้อมูลจำเพาะ

This diagram provides key dimensions of the monitor arm, including a maximum height of approximately 51cm and a maximum horizontal extension of approximately 62cm, illustrating its reach and adjustability.

9. การรับประกันและการสนับสนุนลูกค้า

FLEXISPOT provides a รับประกัน 1 ปี from the date of purchase for this product. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or issues regarding your FLEXISPOT F8L Gas Spring Monitor Arm, please contact our customer support team:

• อีเมล: contact@flexispot.jp
• Please provide your purchase details and a description of the issue for faster assistance.