คู่มือผู้ใช้ Walrus Audio Canvas Stereo Direct Box และ Line Isolator

สินค้าเกินview

The Walrus Audio Canvas Stereo Direct Box and Line Isolator is a versatile device designed to provide a pristine sonic foundation for audio signals. It functions as both a Passive Line Isolator (LI) and a Direct Injection (DI) device, converting unbalanced signals into balanced signals suitable for recording interfaces or front-of-house mixers.

This unit is particularly useful for instruments or devices utilizing both left and right outputs, such as amp-in-a-box DSP guitar rigs, keyboards, and other stereo instruments. Its compact, pedal-sized enclosure makes it suitable for integration into existing pedalboards.

รูปที่ 1 : ด้านหน้า view of the Canvas Stereo Direct Box, showcasing its distinctive colorful stripe design and "CANVAS STEREO" branding.

คุณสมบัติหลัก

• การตอบสนองความถี่แบบแบน: Delivers a consistent audio signal across the entire audible spectrum, from 20Hz to 20kHz.
• Unbalanced to Balanced Conversion: Converts standard 1/4-inch unbalanced inputs to professional XLR balanced outputs, ensuring signal integrity over long cable runs.
• Transformer Isolated Output: Provides electrical isolation to eliminate ground loops and reduce noise.
• สเตอริโอ Amplifier Passthrough (Thru): When the SUM function is disengaged, the left input connects to the left thru, and the right input connects to the right thru, allowing for stereo ampการตั้งค่าไลไฟเออร์
• Mono Summing (SUM): When the SUM function is engaged, the left and right thru jacks are connected, combining the stereo signals into a single mono output, suitable for single amplifier setups (either thru jack can be used).

การตั้งค่า

The Canvas Stereo is a passive device and does not require an external power supply for operation. It is designed for straightforward integration into various audio setups.

การเชื่อมต่ออุปกรณ์ของคุณ

1. การเชื่อมต่ออินพุต: Connect your instrument or audio source (e.g., guitar pedal, amp modeler) to the 1/4-inch "IN" jacks on the Canvas Stereo. Use the "L" input for the left channel and the "R" input for the right channel for stereo sources.
2. การเชื่อมต่อเอาท์พุต: Connect the XLR "LEFT OUT" and "RIGHT OUT" jacks to your mixer, audio interface, or front-of-house system using standard XLR cables. These outputs provide balanced signals.
3. Thru Connection (Optional): The 1/4-inch "THRU" jacks allow you to send the input signal directly to another device, such as an amplifier or monitor. Connect the "L THRU" to your left amplifier and "R THRU" to your right amplifier for stereo monitoring.

รูปที่ 2: ด้านหลัง view of the Canvas Stereo, showing the XLR Left Out and Right Out connections, along with the 1/4-inch input and thru jacks.

รูปที่ 3: จากบนลงล่าง view of the Canvas Stereo connected to an amp simulator pedal, illustrating typical input and thru connections on a pedalboard.

คำแนะนำการใช้งาน

The Canvas Stereo features several switches to optimize your signal for various applications.

ฟังก์ชั่นการควบคุม

• DI/LI Switch:
  • DI (Direct Injection) Mode: Engaged for instruments with low impedance, such as acoustic guitars or bass guitars. This mode is ideal for converting instrument-level signals to balanced mic-level signals.
  • LI (Line Isolator) Mode: Engaged for high-impedance sources like keyboards, digital guitar systems, or amp modelers. This mode maintains the line-level signal while providing isolation, ensuring a robust and clean signal without overdriving mixer preamps.
• สวิตช์แพด: Reduces the input signal level by a fixed amount (typically -15dB or -20dB) to prevent clipping when connecting high-output sources. Engage this switch if you experience distortion.
• GND LIFT (Ground Lift) Switch: Disconnects the ground connection between the input and output to eliminate hum or buzz caused by ground loops. Engage this switch if you hear unwanted noise in your signal.
• ปุ่มผลรวม: When pressed, this button combines the left and right input signals into a single mono signal, which is then sent to both "THRU" jacks. This is useful for sending a stereo source to a single amplifier or input. When disengaged, the left and right signals remain separate through their respective "THRU" jacks.

รูปที่ 4: ด้านล่าง view of the Canvas Stereo, highlighting the DI/LI, PAD, and GND LIFT switches for signal control.

รูปที่ 5: ด้านข้าง view detail of the Canvas Stereo, illustrating the various control buttons and their labels, including the SUM button.

การซ่อมบำรุง

The Walrus Audio Canvas Stereo Direct Box is built with durable metal construction designed for longevity. To ensure optimal performance and extend the lifespan of your device, follow these simple maintenance guidelines:

• การทำความสะอาด: Use a soft, dry cloth to wipe down the exterior of the unit. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• พื้นที่จัดเก็บ: Store the unit in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. When not in use, it is recommended to disconnect all cables.
• การจัดการ: While robust, avoid dropping the unit or subjecting it to severe impacts, which could damage the internal circuitry or external casing.

การแก้ไขปัญหา

If you encounter issues with your Canvas Stereo Direct Box, refer to the following common troubleshooting steps:

• ไม่มีเสียงออก:
  • Ensure all cables (input, output, thru) are securely connected.
  • Verify that the input source is active and producing a signal.
  • Check the settings on your mixer or audio interface to ensure the correct input channel is selected and gain levels are appropriate.
• เสียงหึ่งๆ หรือเสียงซ่า:
  • มีส่วนร่วม ยก GND switch. This is often effective in eliminating ground loop hum.
  • Ensure all audio equipment in your signal chain is properly grounded.
  • Try using different cables to rule out faulty cabling.
• Distorted or Clipped Sound:
  • มีส่วนร่วม แผ่นรอง switch to attenuate high-level input signals.
  • Ensure the input signal level from your source is not excessively high.
  • Check the input gain settings on your mixer or audio interface.
• Incorrect Stereo/Mono Behavior:
  • Verify the state of the ผลรวม button. If you desire separate stereo signals through the thru jacks, ensure the SUM button is disengaged. If you need a combined mono signal, ensure it is engaged.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Walrus Audio products are built with high-quality components and undergo rigorous testing. For specific warranty information, product registration, or technical support, please refer to the official Walrus Audio webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง

สำหรับข้อมูลล่าสุด โปรดเยี่ยมชม: www.walrusaudio.com