การแนะนำ
This manual provides essential information for the safe and effective use of your Sealey Hydraulic Ram for SC10.V3. Please read these instructions thoroughly before operation and retain them for future reference. Proper understanding and adherence to these guidelines will ensure optimal performance and longevity of the product.
ข้อมูลด้านความปลอดภัย
Always prioritize safety when operating hydraulic equipment. Failure to follow these safety instructions may result in serious injury or damage to the equipment.
- Ensure the ram is securely mounted and stable before applying pressure.
- Do not exceed the rated capacity of the hydraulic ram. Refer to the specifications section for details.
- สวมใส่อุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสม รวมถึงแว่นตาและถุงมือเพื่อความปลอดภัย
- Keep hands and other body parts clear of pinch points and moving parts during operation.
- Inspect the ram for any signs of damage or leaks before each use. Do not use if damaged.
- Only use the ram for its intended purpose as a hydraulic force application device.
- Store the ram in a clean, dry, and secure location when not in use.
การตั้งค่า
Before using the hydraulic ram, ensure it is properly prepared and connected to a compatible hydraulic pump system (not included).
- การแกะกล่อง: Carefully remove the hydraulic ram from its packaging. Inspect for any shipping damage.
- การตรวจสอบเบื้องต้น: Check all connections and the ram body for any visible defects, leaks, or loose components.
- Connecting to Pump: Connect the hydraulic hose from your pump system to the inlet port of the ram. Ensure connections are tight and secure to prevent leaks.
- การติดตั้ง: Securely mount the ram in the desired position for your application. Ensure the mounting points are robust enough to withstand the forces generated by the ram.
Figure 1: The Sealey Hydraulic Ram SC10.V3-E, showing its robust construction and connection points.
คำแนะนำการใช้งาน
Follow these steps for safe and effective operation of the hydraulic ram.
- การวางตำแหน่ง: Place the ram in the desired position for the task, ensuring the load is centered and stable.
- การใช้แรงกด: Slowly activate your hydraulic pump to extend the ram. Monitor the pressure gauge on your pump system to ensure you do not exceed the ram's maximum operating pressure.
- Holding Load: Once the desired extension or force is achieved, maintain pressure as required by your application.
- Retracting Ram: To retract the ram, slowly release the pressure from your hydraulic pump system. The ram will retract as pressure is relieved.
- การตัดการเชื่อมต่อ: After use, ensure all pressure is released before disconnecting the hydraulic hose.
Figure 2: The Sealey Hydraulic Ram SC10.V3-E, potentially shown with an accessory or in an operational context, demonstrating its form factor for use.
การซ่อมบำรุง
Regular maintenance ensures the longevity and reliable performance of your hydraulic ram.
- การทำความสะอาด: Keep the ram clean and free from dirt, dust, and debris. Wipe down the exterior with a clean cloth after each use.
- การหล่อลื่น: Periodically apply a thin layer of hydraulic oil to the exposed piston rod to prevent corrosion and ensure smooth operation.
- Fluid Check: Ensure your hydraulic pump system has adequate and clean hydraulic fluid. Contaminated fluid can damage the ram.
- การตรวจสอบซีล: Regularly inspect seals and connections for any signs of wear, cracking, or leaks. Replace damaged seals immediately.
- พื้นที่จัดเก็บ: Store the ram in a dry, protected environment, ideally with the piston rod fully retracted to prevent exposure and corrosion.
การแก้ไขปัญหา
This section addresses common issues you might encounter with your hydraulic ram.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Ram does not extend | Low hydraulic fluid level in pump; Air in hydraulic system; Damaged seals; Obstruction. | Check and refill hydraulic fluid; Bleed air from system; Inspect and replace seals; Check for obstructions. |
| Ram extends slowly or weakly | Low fluid pressure from pump; Contaminated fluid; Worn pump components. | Check pump pressure; Replace hydraulic fluid; Service or replace pump. |
| การรั่วไหลของน้ำมันไฮดรอลิก | Loose connections; Damaged seals or hoses; Cracked housing. | Tighten connections; Replace damaged seals or hoses; Contact Sealey support for housing damage. |
| Ram does not retract | Pressure not fully released; Internal obstruction; Damaged return spring (if applicable). | Ensure pressure is fully released; Check for internal obstructions; Contact Sealey support. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Sealey customer support.
ข้อมูลจำเพาะ
Key technical specifications for the Sealey Hydraulic Ram for SC10.V3.
- หมายเลขรุ่น: SC10.V3-E
- ผู้ผลิต: ซีลีย์
- น้ำหนักสินค้า: 21.2 ปอนด์
- ขนาดสินค้า : 5.51 x 27.17 x 5.12 นิ้ว
- สี: สีแดง
- แหล่งพลังงาน: AC (refers to compatible pump, not the ram itself)
- ส่วนประกอบที่รวมอยู่: Hydraulic Ram for SC10.V3
- ASIN: B09MJLFPXX
- มีจำหน่ายครั้งแรก: 21 มีนาคม 2023
การรับประกันและการสนับสนุน
Sealey products are manufactured to a high standard and, subject to proper use and maintenance, will provide years of trouble-free performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Sealey webเว็บไซต์.
For technical support, spare parts, or warranty claims, please contact Sealey customer service through their official channels. Ensure you have your product model number (SC10.V3-E) and purchase details available when contacting support.
Official Sealey Webเว็บไซต์: www.sealey.co.uk
