SJoyBring Rearview Camera User Manual (Model: B098NJLVWD)

1. บทนำ

The SJoyBring Rearview Camera is designed to enhance vehicle safety by providing a clear, wide-angle view of the area behind your vehicle. This manual will guide you through the setup, operation, and maintenance of your camera to ensure optimal performance.

คุณสมบัติหลัก:

• ติดตั้งง่าย: Compatible with most 12V vehicles, the 1080P backup camera can be mounted on the front and rear license plate frames, ensuring quick and easy setup.
• Waterproof and Night Vision: Designed with fully sealed glue filling craft, the rearview camera is resistant to car washes, rainy days, and even storms, ensuring consistent performance. It also features night vision capabilities for low-light conditions.
• มุมกว้าง 170°: The backup camera offers a 170° wide viewing angle with an adjustable angle, providing a broad vision and high-sensitive color for safe reversing and driving.

2. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

• SJoyBring Rearview กล้อง
• สายไฟ
• RCA Extension Cable (approx. 19.6 ft)
• สกรูยึด (2 ชิ้น)
• คู่มือการใช้งาน

Image 1: Contents of the SJoyBring Rearview Camera package, including the camera, cables, and mounting hardware.

3. คู่มือการติดตั้ง

Follow these steps to properly install your SJoyBring Rearview Camera. Professional installation is recommended for optimal results.

3.1. การติดตั้งกล้อง

The camera is designed for easy mounting on your vehicle's license plate frame. Ensure the camera has a clear, unobstructed view ด้านหลังของรถของคุณ

1. Identify the optimal mounting location, typically above the license plate.
2. Use the provided screws to securely attach the camera bracket to the vehicle.
3. ปรับมุมกล้องให้ได้ตามต้องการ viewมุมมอง

Image 2: The SJoyBring Rearview Camera mounted, illustrating its 170-degree wide-angle view สำหรับความช่วยเหลือในการจอดรถ

3.2. Wiring the Camera to Your Car Stereo

This process involves connecting the camera to your car's head unit (stereo/monitor) and power source. Refer to the diagram below for visual guidance.

1. Connect the camera's video output (yellow RCA) to the "CAM IN" or "Video IN" port on your car stereo/monitor.
2. Locate the reverse line (or back line) on your car stereo's wiring harness. This wire typically signals the stereo to switch to the camera view เมื่อรถอยู่ในโหมดถอยหลัง
3. Connect the red wire from the camera's power cable to the 12V+ positive terminal of your car's backup light.
4. Connect the black wire from the camera's power cable to the GND (ground) terminal of your car's backup light.
5. ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดมีความปลอดภัยและมีฉนวนป้องกันอย่างเหมาะสม

หมายเหตุสำคัญ: The SJoyBring camera supports AHD video signal format (1280x720P 25fps or 1920x1080P 25fps). Before purchasing, verify that your car monitor or stereo supports the AHD format. If your monitor does not support AHD 1920x1080P, do not cut the white line on the camera cable.

4. คู่มือการใช้งาน

4.1. การเปิดใช้งานกล้อง

Once properly installed, the camera will automatically activate when your vehicle is shifted into reverse, displaying the rear view on your connected car stereo/monitor.

4.2. Adjusting Parking Guide Lines and Resolution

The camera features adjustable parking guide lines and resolution settings. These adjustments are typically made through the settings menu of your car's head unit.

• แนวทางปฏิบัติ: The camera comes with parking guide lines. If you wish to remove them, cut the green wire on the camera cable. To make them reappear, keep the green wire intact.
• ปณิธาน: The camera supports 720P and 1080P resolutions. To switch to 1080P, cut the white wire on the camera cable. To revert to 720P, keep the white wire intact. After cutting, remember to restart your device and set up the reversing camera format in your head unit's settings.
• Adjusting Ruler Line: On certain head units, you can adjust the position and angle of the reversing ruler lines directly through the camera settings interface. Ensure to save any changes made.

Image 3: Comparison of the camera's view during day and night, highlighting its night vision capabilities.

5. การบำรุงรักษา

To ensure the longevity and optimal performance of your SJoyBring Rearview Camera, follow these maintenance guidelines:

• การทำความสะอาด: ทำความสะอาดเลนส์กล้องเป็นประจำด้วยผ้านุ่มๆamp ผ้าสำหรับเช็ดทำความสะอาดสิ่งสกปรก ฝุ่น หรือคราบน้ำที่อาจอุดตันทางเดิน viewหลีกเลี่ยงการใช้น้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
• การออกแบบกันน้ำ: The camera is designed to be waterproof. However, avoid directing high-pressure water jets directly at the camera for extended periods during car washes.
• การตรวจสอบสายเคเบิล: Periodically inspect all cables and connections for any signs of wear, damage, or loose connections. Secure or replace as necessary.
• สภาพแวดล้อม : The camera is built to withstand various harsh weather conditions, including extreme temperatures. However, prolonged exposure to severe conditions may affect its lifespan.

6 การแก้ไขปัญหา

If you encounter any issues with your SJoyBring Rearview Camera, refer to the following troubleshooting tips:

• ไม่มีภาพ/หน้าจอดำ:
  • Check all cable connections (video and power) to ensure they are secure.
  • Verify that your car stereo/monitor is set to the correct input source for the camera.
  • Ensure your car stereo/monitor supports the AHD video signal format. Incorrect format settings can lead to a black screen or interference. Adjust the camera settings (NTSC/PAL, AHD 720p/1080p) in your head unit if applicable.
  • Confirm the camera is receiving power (e.g., check the backup light connection).
• Image Interference/Distortion:
  • ตรวจสอบสายวิดีโอว่าหลวมหรือเสียหายหรือไม่
  • Ensure proper grounding of the camera's power cable.
  • Avoid routing video cables near high-voltagสายไฟหรือแหล่งสัญญาณรบกวนทางไฟฟ้าอื่นๆ
  • Verify the correct video format (NTSC/PAL) is selected in your head unit's settings.
• Image Reversed (Left-to-Right):
  • Some car stereos have a "mirror image" or "left and right mirror images" setting in their reverse camera options. Adjust this setting to correct the image orientation.
• Parking Guide Lines Missing/Incorrect:
  • If the green wire was cut, the guide lines will disappear. Reconnect the green wire if you want them to appear.
  • Adjust the ruler line position and angle through your head unit's camera settings if supported.

7. ข้อมูลจำเพาะ