1. บทนำ
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Clarion WF3030D 12-inch Shallow-Mount Car Audio Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure optimal performance and safety. Retain this manual for future reference.
2. ข้อมูลด้านความปลอดภัย
ปฏิบัติตามข้อควรระวังด้านความปลอดภัยต่อไปนี้เพื่อป้องกันการบาดเจ็บหรือความเสียหายต่อผลิตภัณฑ์และยานพาหนะ:
- ควรตัดการเชื่อมต่อขั้วลบของแบตเตอรี่รถยนต์ทุกครั้งก่อนเริ่มงานเกี่ยวกับระบบไฟฟ้า
- ตรวจสอบให้แน่ใจว่าสายไฟทั้งหมดได้รับการหุ้มฉนวนอย่างถูกต้องเพื่อป้องกันไฟฟ้าลัดวงจร
- ติดตั้งซับวูฟเฟอร์ให้แน่นเพื่อป้องกันการเคลื่อนไหวในระหว่างการทำงานของยานพาหนะ
- Avoid installing the subwoofer in locations that obstruct vehicle controls or safety devices.
- หากไม่แน่ใจเกี่ยวกับขั้นตอนการติดตั้งใดๆ ควรปรึกษาช่างติดตั้งเครื่องเสียงรถยนต์มืออาชีพ
- อย่าให้ซับวูฟเฟอร์สัมผัสกับความชื้นมากเกินไปหรืออุณหภูมิที่สูงหรือต่ำเกินไป
3. เนื้อหาบรรจุภัณฑ์
ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:
- Clarion WF3030D 12-inch Shallow-Mount Subwoofer
- คู่มือการใช้งาน (เอกสารนี้)
- Mounting hardware (screws, clips - may vary)

ภาพที่ 1: จบแล้วview of the Clarion WF3030D subwoofer. Note: The phone holders shown in this image are part of a bundle and are not covered in this subwoofer-specific instruction manual.
4. คุณสมบัติของผลิตภัณฑ์
The Clarion WF3030D subwoofer is engineered for powerful bass reproduction in a compact design:
- การจัดการพลังงานสูงสุด: รวม 1000 วัตต์
- การจัดการพลังงานอย่างต่อเนื่อง: 300 วัตต์
- Dual 4-Ohm Heavy Duty Kapton Voice Coils: For flexible wiring options and robust power handling.
- Nitrile Butadiene Rubber High Excursion Surround: Ensures long throw and durability.
- Hyper Extended Rear Vented Pole Piece: Improves thermal management and reduces distortion.
- Aluminized IPP Dust Cap: Provides rigidity and a sleek appearance.
- Reinforced SPP Cone: Delivers accurate and impactful bass.
- Linear Cotton Spider with Integrated Tinsel leads: For reliable performance and longevity.
- Custom Shallow Stamped Steel Powder Coated Basket: Designed for shallow mounting applications.

ภาพที่ 2: ด้านบน view of the Clarion WF3030D subwoofer, showcasing its aluminized IPP dust cap and reinforced SPP cone.
5. การตั้งค่าและการติดตั้ง
Proper installation is crucial for the performance and longevity of your subwoofer. Consider professional installation if you are unfamiliar with car audio wiring and enclosure construction.
5.1 คำแนะนำเกี่ยวกับการเลือกตู้หรือรั้ว
The WF3030D is designed for use in a sealed or vented enclosure. Recommended enclosure volumes are:
- สิ่งที่แนบมาปิดผนึก: 0.45 ลูกบาศก์ฟุต
- ตู้ระบายอากาศ: 0.60 ลูกบาศก์ฟุต
Ensure the enclosure is robust and airtight (for sealed) or properly ported (for vented) to prevent air leaks and maximize sound quality.
5.2 ขนาดการติดตั้ง
Carefully measure and cut the mounting hole according to these specifications:
- มิติภายนอก: 10-21/32 นิ้ว (260 มม.)
- ขนาดคัตเอาต์: 9-17/64 นิ้ว (235 มม.)
- ความลึกในการติดตั้ง: 2-25/32 นิ้ว (80 มม.)

ภาพที่ 3: ด้านข้าง view of the WF3030D, illustrating its shallow mounting depth for versatile installation.
5.3 Wiring the Dual 4-Ohm Voice Coils
The WF3030D features dual 4-ohm voice coils, offering flexibility in wiring configurations to match your ampข้อกำหนดด้านอิมพีแดนซ์ของแอมพลิฟายเออร์ ตัวเลือกการเดินสายทั่วไป ได้แก่:
- โหลด 1 โอห์ม (การต่อแบบขนาน): Connect both voice coils in parallel. This configuration results in a 1-ohm total impedance, suitable for amplifiers stable at 1 ohm.
- โหลด 8 โอห์ม (การต่อแบบอนุกรม): Connect both voice coils in series. This configuration results in an 8-ohm total impedance, suitable for amplifiers requiring a higher impedance load.
Always refer to your amplifier's manual for recommended impedance loads. Incorrect wiring can damage your amplifier หรือซับวูฟเฟอร์

ภาพที่ 4: ด้านหลัง view of the WF3030D, showing the dual 4-ohm voice coil terminals for wiring connections.
6. คู่มือการใช้งาน
หลังจากติดตั้งแล้ว โปรดปฏิบัติตามคำแนะนำเหล่านี้เพื่อประสิทธิภาพสูงสุด:
- ระยะเวลาการปรับตัว: Allow a break-in period of approximately 10-20 hours of moderate listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and perform optimally.
- Ampการตั้งค่าไลเออร์: ปรับแต่งของคุณ amplifier's gain, crossover, and bass boost settings carefully. Start with low settings and gradually increase them until the desired bass level is achieved without distortion.
- ความถี่ครอสโอเวอร์: ตั้งค่าตัวกรองความถี่ต่ำ (LPF) บนอุปกรณ์ของคุณ ampปรับความถี่ของแอมป์หรือชุดเครื่องเสียงให้เหมาะสม โดยทั่วไปจะอยู่ระหว่าง 80Hz ถึง 120Hz เพื่อให้แน่ใจว่าซับวูฟเฟอร์จะสร้างเสียงความถี่ต่ำเท่านั้น
- หลีกเลี่ยงการขับเกิน: Do not continuously operate the subwoofer at levels that produce audible distortion, as this can lead to damage.
7. การบำรุงรักษา
The Clarion WF3030D subwoofer requires minimal maintenance:
- การทำความสะอาด: Use a soft, dry cloth to wipe the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- การตรวจสอบ: Periodically check the mounting screws and wiring connections to ensure they are secure.
- การปกป้องสิ่งแวดล้อม: Keep the subwoofer free from dust, debris, and direct sunlight when not in use or if exposed in the vehicle.
8 การแก้ไขปัญหา
หากคุณประสบปัญหาเกี่ยวกับซับวูฟเฟอร์ โปรดดูปัญหาทั่วไปและวิธีแก้ไขต่อไปนี้:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| ไม่มีเสียงจากซับวูฟเฟอร์ |
|
|
| เสียงผิดเพี้ยน |
|
|
| เสียงเบสอ่อนหรือเบา |
|
|
If the problem persists after attempting these solutions, contact Clarion customer support or a qualified car audio technician.
9. ข้อมูลจำเพาะ
Detailed technical specifications for the Clarion WF3030D subwoofer:
| แบบอย่าง | WF3030D |
| ประเภทลำโพง | ซับวูฟเฟอร์ |
| การจัดการพลังงานสูงสุด | รวม 1000 วัตต์ |
| การจัดการพลังงานอย่างต่อเนื่อง | 300 วัตต์ |
| วอยซ์คอยล์ | Dual 4-Ohm Heavy Duty Kapton |
| ล้อมรอบ | Nitrile Butadiene Rubber High Excursion |
| หมวกกันฝุ่น | Aluminized IPP |
| กรวย | Reinforced SPP |
| Pole Piece | Hyper Extended Rear Vented |
| แมงมุม | Linear Cotton with Integrated Tinsel leads |
| ตะกร้า | Custom Shallow Stamped Steel Powder Coated |
| การตอบสนองความถี่ | 40-1000 เฮิรตซ์ |
| ประสิทธิภาพ | 85 เดซิเบล/วัตต์/เมตร |
| อิมพีแดนซ์ | 4 โอห์มคู่ |
| มิติภายนอก | 10-21/32 นิ้ว (260 มม.) |
| ขนาดคัตเอาท์ | 9-17/64 นิ้ว (235 มม.) |
| ความลึกในการติดตั้ง | 2-25/32 นิ้ว (80 มม.) |
| ปริมาตรของกล่องปิดผนึกที่แนะนำ | 0.45 ลูกบาศก์ฟุต |
| ปริมาตรของกล่องระบายอากาศที่แนะนำ | 0.60 ลูกบาศก์ฟุต |
10. การรับประกันและการสนับสนุน
The Clarion WF3030D subwoofer comes with a การรับประกันแบบจำกัด. Please refer to the warranty card included with your purchase or visit the official Clarion webเว็บไซต์สำหรับข้อกำหนดและเงื่อนไขโดยละเอียด
For technical support, troubleshooting assistance, or warranty claims, please contact Clarion customer service through their official webเว็บไซต์หรือข้อมูลติดต่อที่ระบุไว้ในเอกสารผลิตภัณฑ์ของคุณ
คุณสามารถเยี่ยมชม Clarion Store on Amazon สำหรับข้อมูลเพิ่มเติม





