Elitech Inframate C Infrared R-744 Refrigerant Leak Detector User Manual

1. สินค้าหมดview

The Elitech Inframate C Infrared R-744 Refrigerant Leak Detector is engineered for precise and reliable detection of carbon dioxide (CO2) leaks in various applications. Utilizing an advanced infrared sensor, it offers high sensitivity and rapid response, making it an essential tool for professionals.

คุณสมบัติที่สำคัญ ได้แก่:

• Advanced Infrared Sensor: Provides stable and accurate detection with a low possibility of contamination and strong anti-interference ability. The sensor boasts an impressive life of 40,000 hours.
• Higher Sensitivity: Adaptive sensitivity allows detection of leaks as small as 6g/year.
• Large TFT LCD Display: Clearly shows leakage levels using colorful bars, enhancing user experience and intuitive result presentation.
• ง่ายต่อการใช้: Equipped with a flexible stainless steel probing rod to reach difficult areas.
• ปลอดภัยและเชื่อถือได้: Features rechargeable and replaceable batteries for environmental friendliness and convenience.

Figure 1: Elitech Inframate C Infrared R-744 Refrigerant Leak Detector

2. เนื้อหาบรรจุภัณฑ์

เมื่อเปิดบรรจุภัณฑ์ โปรดตรวจสอบว่าประกอบด้วยสิ่งของต่อไปนี้ทั้งหมด:

• 1 x Leak Detector
• 1 x คู่มือผู้ใช้
• สาย USB 1 เส้น
• อะแดปเตอร์ 1 ตัว
• 1 x Packet of Filters (5 filters)
• 1 x UV Light
• 1 x เสาต่อขยาย

Figure 2: All items included in the Elitech Inframate C package

3. การตั้งค่าและการใช้งาน

3.1 การระบุส่วนประกอบ

Figure 3: Labeled components of the Elitech Inframate C, including flexible probe, UV LED, filter components, 3.5mm headphone jack, USB port (Type-C), display screen, buttons, and buzzer.

3.2 Powering On and Warm-up

To power on the detector, press the เปิด/ปิด button. The device will enter a warm-up phase, which takes approximately 30 seconds. During this time, the display will show a warming-up message. Once warmed up, it will enter the infrared detection interface with a continuous beeping sound on standby.

3.3 การปรับความไว

การ เซนส์ button allows you to adjust the detection sensitivity. You can cycle through High (H), Medium (M), and Low (L) levels as needed. The default sensitivity level is Medium (M).

3.4 Leak Detection and Automatic Reset

The Elitech Inframate C features an automatic reset function. This function resets the leaking level every 3 seconds, which is crucial for helping users pinpoint the exact leaking source by allowing the device to re-calibrate to the ambient air and then react to the leak as you move the probe.

3.5 Recording Peak Levels

กดปุ่ม จุดสูงสุด button to record the current peak level of refrigerant concentration detected. Pressing it again will clear the recorded peak value.

3.6 ฟังก์ชั่นปิดเสียง

To mute the continuous beeping sound during standby or operation, press the MUTE ปุ่ม.

3.7 การปิดเครื่อง

หากต้องการปิดเครื่องตรวจจับ ให้กดปุ่มค้างไว้ เปิด/ปิด กดปุ่มนี้เป็นเวลา 2 วินาที

3.8 การสาธิตการปฏิบัติงาน

Video 1: A comprehensive demonstration of the Elitech Inframate C's features, including power-on, warm-up, sensitivity adjustment, automatic reset for leak detection, peak recording, and power-off procedures.

4. ข้อควรพิจารณาที่สำคัญ

To ensure accurate readings and prolong the life of your detector, please observe the following:

• หลีกเลี่ยงสารปนเปื้อน: Leaking areas are often covered with substances like compressor oil or dirt. It is crucial to prevent the sensor tip from coming into contact with these contaminants, as they can affect detection accuracy and sensor longevity.
• ให้แห้ง: Keep the sensor tip away from any moisture or other solvents to avoid false alarms and potential damage to the sensor.
• Wear Face Mask: When using the highest sensitivity setting, it is recommended to wear a face mask to avoid faulty alarms caused by exhaled breath.

5. ข้อมูลจำเพาะ

Figure 4: Detailed specifications of the Elitech Inframate C Leak Detector.

6. การบำรุงรักษา

Proper maintenance ensures the longevity and accuracy of your Elitech Inframate C Leak Detector:

• การดูแลเซ็นเซอร์: The infrared sensor is a critical component. Avoid exposing the sensor tip to compressor oil, dirt, moisture, or other solvents, as these can contaminate or damage it, leading to inaccurate readings or malfunction.
• การทำความสะอาด: Regularly wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the probe and sensor tip are clean before and after each use.
• การเปลี่ยนตัวกรอง: The device comes with a packet of filters. Replace filters periodically or if you notice a decrease in performance or increased false alarms, especially when operating in dusty environments.
• การจัดการแบตเตอรี่: Use only the specified rechargeable batteries. Ensure they are properly charged before use and replaced when their performance degrades.
• พื้นที่จัดเก็บ: Store the detector in its protective case in a cool, dry place away from direct sunlight, extreme temperatures, and corrosive substances.

7 การแก้ไขปัญหา

ต่อไปนี้คือปัญหาทั่วไปบางประการและแนวทางแก้ไขที่เป็นไปได้:

7.1 Device Beeps Continuously Upon Power On

ปัญหา: The device starts beeping immediately when turned on.

สารละลาย: This is normal behavior. The device beeps upon powering on. The alarm sound becomes more urgent when a leak is detected.

7.2 Leaks Cannot Be Detected

ปัญหา: The detector fails to identify leaks.

วิธีแก้ไข:

• The product automatically calibrates. After moving away from a suspected leak point, approach it multiple times to confirm if a leak is present.
• Check if the sensor is damaged.
• Verify if the air pump has lost suction capability.
• Inspect for any blockages in the internal pipeline.

7.3 Product Alarms in Non-Leaking Environment

ปัญหา: The detector triggers an alarm even when no leak is present.

วิธีแก้ไข:

• Deformation of the optical chamber can affect detection data; this is a normal occurrence.
• A loose critical optical filter might be the cause. Contact support for repair assistance if this is suspected.
• Check for routers or other electronic devices nearby that might be causing electromagnetic interference.

8. การรับประกันและการสนับสนุน

Elitech provides comprehensive customer support for the Inframate C Infrared R-744 Refrigerant Leak Detector.

• การสนับสนุนด้านเทคนิค: Enjoy 24/7 US Technician Support via Email and Phone for any operational or technical queries.
• ข้อมูลการรับประกัน: Please refer to the warranty card included in your product package for detailed terms and conditions regarding your device's warranty.

For further assistance, please visit the official Elitech webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง