การแนะนำ
This manual provides essential information for the safe and effective use of the Sealey WCR02 Motorcycle Roll-in Wheel Clamp. Please read these instructions carefully before setup, operation, or maintenance.
The Sealey WCR02 is designed to increase the stability of a motorcycle by securely clamping its front wheel. It features a pivot clamp that locks the wheel using the motorcycle's weight, making it suitable for use on trailers, in vans, or on motorcycle lifts.
ข้อมูลด้านความปลอดภัย
- Always ensure the clamp is securely bolted down to a stable surface before use.
- Motorcycle must also be secured using additional tie-down straps. The clamp provides stability but is not the sole securing method.
- Ensure the wheel clamp is adjusted correctly for the specific wheel size and tyre width of your motorcycle.
- Do not exceed the maximum recommended tyre width of 130mm.
- Keep hands and feet clear of moving parts during motorcycle loading and unloading.
การติดตั้งและการตั้งค่า
The Sealey WCR02 wheel clamp requires secure bolt-down installation. Fittings are not included and must be sourced separately based on your mounting surface.
- เลือกตำแหน่ง: Select a stable and level surface for installation, such as a trailer bed, van floor, or motorcycle lift. Ensure there is sufficient space around the clamp for safe operation and motorcycle maneuvering.
- วางตำแหน่งClamp: Place the wheel clamp ในตำแหน่งที่ต้องการamp is designed to be bolted down.
- ทำเครื่องหมายจุดเจาะ: Use the pre-drilled holes on the clamp's base as a template to mark the drilling points on your mounting surface.
- เจาะรู: Drill holes of appropriate size for your chosen bolts and fixings.
- รักษาความปลอดภัยClamp: Bolt the wheel clamp firmly to the surface using suitable high-strength fasteners (not supplied). Ensure all bolts are tightened securely to prevent any movement of the clamp ระหว่างการใช้งาน
- Adjust for Wheel Size: clamp is adjustable to fit wheels from Ø15" to 21" (380-535mm) and tyre widths from 50-130mm. Adjust the movable front section by removing the pin, sliding it to the appropriate position for your motorcycle's wheel, and reinserting the pin.
Image: The Sealey WCR02 Motorcycle Roll-in Wheel Clamp, showing its L-shaped design and adjustable front section.
Image: Close-up of hands using a wrench to tighten a bolt on the base of the Sealey WCR02 clamp, demonstrating the bolt-down installation process.
คำแนะนำการใช้งาน
- เตรียมรถจักรยานยนต์: Ensure the motorcycle is in neutral and the engine is off.
- Roll into Clamp: Carefully roll the motorcycle's front wheel into the clamp. The pivot clamp will engage and lock the front wheel securely as the motorcycle's weight pushes it forward.
- ตรวจสอบการมีส่วนร่วม: Ensure the wheel is fully seated and the pivot clamp has securely locked around the tyre. The motorcycle should feel stable.
- Apply Tie-Down Straps: สำคัญ: ล้อ clamp provides stability, but it is crucial to secure the motorcycle further using appropriate tie-down straps. Attach straps to secure points on the motorcycle and the mounting surface, ensuring the motorcycle cannot tip or move during transport or storage.
- To Remove Motorcycle: Release the tie-down straps. Carefully roll the motorcycle backward out of the clamp. The pivot mechanism will disengage as the weight is removed.
Image: A motorcycle's front wheel is shown securely positioned within the Sealey WCR02 clamp on a trailer bed, illustrating the clamp's function in stabilizing the bike.
Image: A motorcycle is shown with its front wheel in the Sealey WCR02 clamp, which is mounted on a motorcycle lift. Tie-down straps are visible, emphasizing the need for additional securing.
การซ่อมบำรุง
- การตรวจสอบปกติ: Periodically inspect the wheel clamp for any signs of wear, damage, or corrosion. Check all bolted connections for tightness.
- ความสะอาด : เก็บ clamp clean and free from dirt, debris, and moisture. Wipe down with a damp ผ้าถ้าจำเป็น
- การหล่อลื่น: Lightly lubricate the pivot points and adjustable mechanisms with a suitable grease or oil to ensure smooth operation.
- พื้นที่จัดเก็บ: เมื่อไม่ใช้งาน ให้เก็บอุปกรณ์ไว้ในที่ที่เหมาะสมamp in a dry environment to prevent rust and prolong its lifespan.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Wheel does not lock securely. | Incorrect adjustment for wheel size; insufficient motorcycle weight; clamp not securely bolted. | ปรับแต่ง clamp to the correct wheel diameter. Ensure the motorcycle is fully rolled in. Verify the clamp is firmly bolted to the surface. |
| Clamp feels unstable. | Loose mounting bolts; unstable mounting surface. | Check and tighten all mounting bolts. Ensure the surface it's mounted on is rigid and stable. |
| Difficulty rolling wheel in/out. | Lack of lubrication on pivot points; debris in mechanism; incorrect adjustment. | Clean any debris from the mechanism. Apply lubricant to pivot points. Re-check wheel size adjustment. |
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | ดับเบิลยูซีอาร์02 |
| ผู้ผลิต | ซีลีย์ |
| Adjustable Wheel Diameter | Ø15" - 21" (380-535mm) |
| Minimum Tyre Width | 50มม. |
| ความกว้างยางสูงสุด | 130มม. |
| น้ำหนักสินค้า | 19.47 ปอนด์ |
| ขนาดสินค้า | 7.87 x 24.8 x 61.02 นิ้ว |
| ส่วนประกอบที่รวมอยู่ | Motorcycle Roll-in Wheel Clamp - Bolt Down |
การรับประกันและการสนับสนุน
For warranty information and technical support, please refer to the official Sealey webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ
ซีลีย์ อย่างเป็นทางการ Webเว็บไซต์: www.sealey.co.uk
