1. บทนำ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Gravity Warzone WZ10D4-1 10-inch car audio shallow subwoofers. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. These subwoofers are designed for car audio applications, featuring a dual 4-ohm voice coil configuration for flexible wiring options.

Figure 1.1: Gravity Warzone WZ10D4-1 10-inch shallow subwoofer, showing the front cone and rear terminal connections.
2. เนื้อหาบรรจุภัณฑ์
ตรวจสอบว่ามีรายการทั้งหมดอยู่ในบรรจุภัณฑ์ก่อนดำเนินการติดตั้ง
- 2x Gravity Warzone WZ10D4 Subwoofers
3. ข้อมูลด้านความปลอดภัย
ปฏิบัติตามข้อควรระวังด้านความปลอดภัยต่อไปนี้เสมอระหว่างการติดตั้งและการใช้งาน:
- โปรดถอดแบตเตอรี่รถยนต์ออกก่อนเริ่มงานเกี่ยวกับระบบไฟฟ้าใดๆ เพื่อป้องกันการลัดวงจร
- Ensure proper ventilation for the subwoofer and amplifier เพื่อป้องกันความร้อนสูงเกินไป
- Use appropriate gauge wiring for power, ground, and speaker connections to handle the current and power output.
- Avoid installing the subwoofer in locations where it may be exposed to moisture or extreme temperatures.
- Securely mount the subwoofer to prevent movement during vehicle operation, which could cause damage or injury.
- Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Adjust volume levels responsibly.
4. การตั้งค่าและการติดตั้ง
Proper installation is crucial for optimal performance and longevity of your subwoofers. If you are unsure about any part of the installation process, consult a professional car audio installer.
4.1 ข้อกำหนดเกี่ยวกับตู้หรืออุปกรณ์หุ้ม
These subwoofers are designed for use in sealed or ported enclosures. Refer to the subwoofer's technical specifications for recommended enclosure volumes. Ensure the enclosure is robust and sealed properly to prevent air leaks.
4.2 การติดตั้ง
Mount the subwoofer securely within the chosen enclosure using appropriate screws. Ensure there is no interference with the cone's movement and that the subwoofer gasket creates a tight seal with the enclosure.
4.3 การเชื่อมต่อสายไฟ
The WZ10D4-1 features a dual 4-ohm voice coil configuration. This allows for various wiring options to achieve different impedance loads at your ampเครื่องขยายเสียง รูปแบบการใช้งานทั่วไป ได้แก่:
- 1 Ohm Load: Wire both voice coils in parallel.
- 2 Ohm Load: Wire each subwoofer's voice coils in series (8 ohms per sub), then wire the two subwoofers in parallel (4 ohms total). Or, wire each subwoofer's voice coils in parallel (2 ohms per sub), then wire the two subwoofers in series (4 ohms total). For a single subwoofer, wire the two 4-ohm voice coils in parallel to achieve a 2-ohm load.
- 8 Ohm Load: Wire both voice coils in series.
Always match the final impedance load to your amplifier's stable operating range. Incorrect wiring can damage your amplifier or subwoofers.

รูปที่ 4.1: ระยะใกล้ view of the subwoofer's push terminals for secure wire connections.
4.4 Ampการเลือก lifier
เลือก amplifier that can provide sufficient RMS power within the recommended range for the WZ10D4-1 subwoofers (400 watts RMS each). Ensure the amplifier is stable at the impedance load presented by your wiring configuration.
5. คู่มือการใช้งาน
Once installed, operate your subwoofers by following these guidelines:
- การเพิ่มพลังเริ่มต้น: After installation, turn on your car audio system at a low volume. Gradually increase the volume and check for proper operation and sound quality.
- การตั้งค่าเกน: Adjust the gain control on your amplifier carefully. Do not use the gain control as a volume knob. Set it to match the output voltage of your head unit to prevent distortion.
- การตั้งค่าครอสโอเวอร์: ใช้ตัวกรองความถี่ต่ำ (LPF) บนของคุณ amplifier or head unit to send only low frequencies to the subwoofers. A common starting point is 80-100 Hz.
- ระยะเวลาการปรับตัว: Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofers at their maximum potential. This allows the suspension components to loosen up, improving performance.
6. การบำรุงรักษา
Minimal maintenance is required for your subwoofers to ensure long-term performance:
- การทำความสะอาด: Periodically wipe the subwoofer cone and surround with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
- การตรวจสอบ: Regularly inspect the wiring connections for tightness and corrosion. Check the subwoofer surround for any signs of damage or deterioration.
- ปัจจัยด้านสิ่งแวดล้อม: Protect the subwoofers from direct sunlight, extreme temperatures, and moisture, which can degrade materials over time.
7 การแก้ไขปัญหา
If you experience issues with your subwoofers, refer to the following common troubleshooting steps:
- ไม่มีเสียง:
- Check all power, ground, remote, and speaker connections for proper contact.
- ตรวจสอบความถูกต้อง amplifier is powered on (check power indicator light).
- Ensure the head unit is sending an audio signal.
- ตรวจสอบ amplifier fuses and vehicle fuses.
- เสียงผิดเพี้ยน:
- ลดความ ampกำไร lifier
- Check for proper crossover settings; ensure only low frequencies are sent to the subwoofer.
- Verify the impedance load matches the amplifier's stable operating range.
- Ensure the subwoofer is not over-powered or under-powered.
- เบสอ่อน:
- ตรวจสอบ amplifier gain and subwoofer level settings on the head unit.
- Verify correct wiring polarity (+ to + and - to -).
- Ensure the enclosure is sealed properly (if applicable) and of the correct volume.
- Adjust crossover frequency and bass boost settings.
If problems persist after performing these checks, contact customer support or a qualified technician.
8. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ชื่อรุ่น | WZ10D4-1 |
| ประเภทลำโพง | ซับวูฟเฟอร์ |
| ขนาดลำโพง | 10 นิ้ว |
| การกำหนดค่าคอยล์เสียง | คู่ 4 โอห์ม |
| Peak Power (each) | 1200 วัตต์ |
| RMS Power (each) | 400 วัตต์ |
| วัสดุรูปกรวย | Competition Grade Carbon Fiber |
| วัสดุรอบทิศทาง | Treated Rubber, High Roll Foam |
| ขนาดคอยล์เสียง | 2.5 นิ้ว |
| โครงสร้างแม่เหล็ก | เฟอร์ไรต์ |
| ระบบระบายความร้อน | Advanced Air Flow |
| การตอบสนองความถี่ | 40 - 500 เฮิรตซ์ |
| ความไวต่อความรู้สึก | 86 เดซิเบล |
| ข้อแนะนำการใช้ | In-car Audio |
| ประเภทการติดตั้ง | ที่ยึดรถยนต์ |
9. ข้อมูลการรับประกัน
Gravity products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Gravity webไซต์ เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ในกรณีเรียกร้องการรับประกัน
10. การสนับสนุน
For technical assistance, troubleshooting beyond this manual, or customer service inquiries, please contact Gravity customer support through their official webเว็บไซต์หรือข้อมูลการติดต่อที่ให้มาพร้อมกับการซื้อของคุณ





