คู่มือการใช้งานกระจกกรอบกลมแกะสลักขนาด 30 นิ้ว รุ่น MR3802W จาก Habitat Decor

1. สินค้าหมดview

The Habitat Decor MR3802W is a 30-inch round mirror designed to enhance your living space. It features a wooden frame with ridged details and a distressed white finish, offering a rustic aesthetic. This mirror is intended for wall mounting and measures 30 inches in length and 30 inches in width.

• ขนาด : 30 inches (76.2 cm) long x 30 inches (76.2 cm) wide
• วัสดุกรอบ: ไม้
• เสร็จ: สีขาวทุกข์
• ประเภทการติดตั้ง: ติดผนัง

รูปที่ 1 : ด้านหน้า view of the Habitat Decor 30-inch round mirror, showcasing its distressed white carved frame.

2. ข้อมูลด้านความปลอดภัยที่สำคัญ

Please read and understand all safety instructions before handling or installing the mirror. Failure to follow these instructions may result in injury or damage to the product.

• คำเตือน: This mirror contains breakable glass. Always handle with extreme care to prevent injury.
• For wall mounting, ensure the chosen wall surface is structurally sound and level to securely support the mirror's weight (approximately 9.7 pounds or 4.4 kg).
• Avoid placing the mirror near direct heat sources, open flames, or areas prone to significant vibration, as this can increase the risk of breakage.
• In the event of breakage, exercise caution when cleaning up shattered glass to avoid cuts. Use protective gloves and dispose of glass fragments safely.
• Keep out of reach of children and pets during installation and ensure it is securely mounted afterward.

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าส่วนประกอบทั้งหมดอยู่ครบและไม่ได้รับความเสียหายก่อนดำเนินการติดตั้ง

• 1 x Habitat Decor MR3802W 30-inch Round Carved Frame Mirror
• Pre-installed hanging hardware (D-rings or similar, typically on the back)

Note: Mounting screws, wall anchors, and tools are not included and must be supplied by the user based on wall type.

4. คำแนะนำในการติดตั้ง

The Habitat Decor MR3802W mirror is designed for wall mounting and requires no assembly. Follow these steps for secure installation:

1. เลือกสถานที่: Select a suitable wall location, ensuring it is free from electrical wires, plumbing, or other obstructions. The wall must be capable of supporting the mirror's weight (approximately 9.7 lbs).
2. รวบรวมเครื่องมือ: You will need a measuring tape, pencil, level, drill, appropriate wall anchors (e.g., drywall anchors, toggle bolts, or stud screws depending on your wall type), and screws.
3. Measure Hanging Points: On the back of the mirror, locate the pre-installed hanging hardware (typically two D-rings or keyhole hangers). Measure the distance between the centers of these hangers.
4. มาร์ค วอลล์: Transfer this measurement to your chosen wall location. Use a level to ensure the marked points are perfectly horizontal.
5. Install Anchors/Screws: Drill pilot holes at the marked points and install appropriate wall anchors if not drilling into a wall stud. Insert screws into the anchors or studs, leaving a small portion of the screw head exposed for the mirror's hangers to rest on.
6. กระจกแขวน: Carefully lift the mirror and align the pre-installed hanging hardware on the back with the screws on the wall. Gently lower the mirror until it is securely seated on the screws.
7. ตรวจสอบความเสถียร: ลองดึงกระจกเบาๆ เพื่อให้แน่ใจว่ามันมั่นคงและติดกับผนังอย่างแน่นหนา

รูปที่ 2: ด้านหลัง view of the mirror, illustrating the pre-installed hanging hardware for wall mounting.

5. การดูแลรักษา

Proper care will help maintain the appearance and longevity of your mirror.

• การทำความสะอาดพื้นผิวกระจก: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently until clean and streak-free.
• การทำความสะอาดกรอบ: The wooden frame with its distressed white finish should be cleaned with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• การจัดการ: Always lift the mirror by its frame, not by the glass.
• สิ่งแวดล้อม: Avoid exposing the mirror to extreme temperature changes or high humidity, which can affect the wood frame and mirror backing.

Figure 3: Detail of the mirror's distressed white carved wooden frame.

6 การแก้ไขปัญหา

This section addresses common concerns you might encounter with your mirror.

7. ข้อมูลจำเพาะผลิตภัณฑ์

8. การรับประกันและการสนับสนุน

Based on the provided information, this product does not come with a manufacturer's warranty ("No Warranty").

For any questions regarding the product or assistance with installation, please refer to the retailer's customer service or contact the manufacturer, Brewster Home Fashions, directly.

• ผู้ผลิต: Brewster Home Fashions
• สถานที่ประกอบการ: RANDOLPH, MA, 02368 US