คู่มือการใช้งานประตูเด็ก Babelio สำหรับประตูและบันได

สินค้าเกินview

The Babelio Baby Gate is designed for doorways and stairs, offering a secure barrier for children and pets. This pressure-mounted gate is easy to install without drilling, and features an auto-close function for convenience and safety. It is adjustable to fit various opening widths and heights, making it versatile for different areas of your home.

รวมส่วนประกอบ

ก่อนเริ่มการติดตั้ง โปรดตรวจสอบให้แน่ใจว่ามีอุปกรณ์ครบทุกชิ้น:

• Main Gate Frame
• 5.5-inch wide extension kit (1)
• 2.75-inch wide extension kits (2)
• แท่งแกนเกลียว (4)
• ถ้วยติดผนัง (4)
• สติ๊กเกอร์(4)
• U-bolts (2)
• Anti-collision grooves (3)
• Wall protectors (4)
• ประแจ (1)
• Expansion tubes (4)
• สกรู (4)

Image: All components of the Babelio Baby Gate, including the main gate, various extension pieces, and installation hardware.

การติดตั้งและการตั้งค่า

The Babelio Baby Gate features a pressure-mounted design for quick and easy installation without the need for drilling or tools. Follow these steps for proper setup:

1. Do NOT cut zip ties before installation: The gate comes with zip ties holding the frame together. These ties are crucial for maintaining the gate's shape during installation and should only be cut after the gate is fully set up and secured. A gap between the gate latch and the frame is normal before installation and will disappear once properly installed.

Image: Important reminder not to cut the zip ties on the gate before installation is complete.
2. การวัดขนาดช่องเปิด: Accurately measure the width of your doorway or stair opening to determine if extension kits are needed. The gate expands to fit openings between 26-40 inches wide.
3. Add Extensions (if needed): If your opening is wider than the main gate, attach the appropriate extension kits.
4. Install Threaded Spindle Rods: Insert the four threaded spindle rods into the corners of the gate frame. Place the wall cups onto the tension bolts first.
5. Position the Gate: Place the gate in the desired opening. Ensure the gate is centered and level.
6. Tighten the Bolts: Rotate the center round nuts on the threaded spindle rods to apply pressure against the walls. Tighten until the gate is securely held in place. The gap between the gate latch and the frame should reduce to approximately 2mm.
7. Cut Zip Ties: Once the gate is securely installed and the gap is minimal, you may cut the zip ties.
8. ตรวจสอบอย่างสม่ำเสมอ: Periodically check and tighten the bolts for added safety and stability.

วิดีโอแนะนำการติดตั้ง

คำแนะนำการใช้งาน

The Babelio Baby Gate is designed for easy one-handed operation for adults while maintaining security against children and pets.

• การเปิดประตู: To open the gate, simultaneously press the button on the top of the handle and lift the gate. This double-lock mechanism ensures that children cannot easily open the gate.


Image: Visual guide on how to open the gate using the one-handed release mechanism.

• ฟังก์ชันปิดอัตโนมัติ: For convenience, the gate is equipped with an auto-close function. If the gate is opened less than 90 degrees, it will gently swing shut and lock automatically.
• Hold-Open Feature: If you open the gate past 90 degrees, it will remain open, allowing for continuous passage. This is useful when you need to move freely through the opening for an extended period.

Image: Explanation of the gate's auto-close and stay-open functionalities.
• One-Way Swing (for stairs): When installed at the top of stairs, the gate is designed to swing only in one direction (away from the stairs) to prevent the danger of swinging over the stairs.

การซ่อมบำรุง

To ensure the longevity and continued safe operation of your Babelio Baby Gate, regular maintenance is recommended:

• การทำความสะอาด: เช็ดทำความสะอาดประตูเป็นประจำด้วยน้ำยาทำความสะอาดamp ใช้ผ้าและสบู่เหลวอ่อนๆ เช็ดทำความสะอาด หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลายที่อาจทำให้พื้นผิวเสียหายได้
• ตรวจสอบการเชื่อมต่อ: Periodically inspect all connection points, especially the threaded spindle rods, to ensure they remain tight and secure. Re-tighten if any looseness is detected.
• ตรวจสอบความเสียหาย: Regularly check the gate for any signs of wear, damage, or loose parts. If any damage is found, discontinue use immediately and contact customer support.

การแก้ไขปัญหา

If you encounter any issues with your Babelio Baby Gate, refer to the following common troubleshooting tips:

• Gate appears bent or has a gap before installation: This is normal and not a defect. The gate is designed to have a slight gap before it is fully installed and pressure-mounted. The gap will close once the tension bolts are properly tightened against the wall.
• Gate is not secure/wobbly: Ensure all four threaded spindle rods are tightened sufficiently. Use the included spanner tool to apply adequate pressure. Make sure the wall cups are properly positioned against a flat, stable surface.
• ประตูเปิดหรือปิดยาก: Check if the gate is level and properly aligned. If it's too tight, slightly loosen the tension bolts until the gate swings smoothly. Ensure both the top and bottom release buttons are pressed simultaneously when opening.
• Gate does not auto-close: Verify that the gate is installed correctly and is level. The auto-close mechanism relies on proper alignment. If the gate is opened too wide (past 90 degrees), it will engage the hold-open feature.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For detailed warranty information or further assistance, please refer to the official documentation or contact Babelio customer support.

• คู่มือการติดตั้ง (PDF): ดาวน์โหลด PDF
• แผนการคุ้มครอง: Extended protection plans are available for purchase. Please refer to the product page for details on 2-Year and 3-Year Protection Plans.