คู่มือการใช้งานเครื่องลามิเนต Crenova

1. บทนำ

Thank you for choosing the Crenova Laminator Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new laminator. Please read it thoroughly before first use and keep it for future reference.

Image: The Crenova Laminator Machine in white, processing a document with a laminated sheet visible.

2. สินค้าหมดview

2.1 ส่วนประกอบ

Image: Diagram illustrating the main components of the laminator, including the power switch, mode indicator, and document inlet.

• 1. Power/Mode Switch: Controls power and selects Hot or Cold lamination mode.
• 2. Ready Indicator Light: Illuminates green when the machine is ready for use.
• 3. Document Inlet: บริเวณที่ใส่ซองเคลือบพลาสติก
• 4. ABS Lever: Used to release jammed documents.

2.2 คุณสมบัติหลัก

• Fast Warm-up: Heats up in 1-2 minutes for quick operation.
• Hot & Cold Mode: Supports both thermal (hot) and pressure-sensitive (cold) lamination for various document types.
• พกพาสะดวกเป็นพิเศษ: Compact design (335mm x 88mm x 65mm, 742g) suitable for any desktop.
• Jam Prevention: Equipped with an ABS lever to easily clear paper jams and protect documents.
• การทำงานด้วยปุ่มเดียว: Simple switch for mode selection, ensuring ease of use.
• 2-Roller System: Provides smooth, bubble- and wrinkle-free lamination.
• ความเข้ากันได้กว้าง: Accommodates laminating pouches from 80-125 microns (2x80-2x125mic) and sizes up to A4 (9 inches).

3. การตั้งค่า

3.1 การแกะกล่อง

Carefully remove the laminator from its packaging. Ensure all components are present and undamaged. Place the laminator on a stable, flat surface with adequate ventilation around it.

3.2 การเชื่อมต่อสายไฟ

Plug the power cord into a standard electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.

3.3 Initial Warm-up

For hot lamination, switch the power to 'HOT'. The red indicator light will illuminate. Wait approximately 1-2 minutes until the 'READY' indicator light turns green, signaling the machine has reached the optimal operating temperature.

Image: The laminator with a visual representation of a 2-minute warm-up time. Cold mode does not require preheating.

4. คู่มือการใช้งาน

4.1 การเคลือบด้วยความร้อน

1. Prepare your document by placing it inside a laminating pouch. Ensure the document is centered and there is an even border around it.
2. Turn the laminator on and select the 'HOT' mode. Wait for the 'READY' indicator light to turn green.
3. Insert the sealed edge of the laminating pouch into the document inlet, ensuring it is straight and centered. The machine will automatically feed the pouch through.
4. Support the pouch as it exits the machine to prevent bending or creasing.
5. Allow the laminated document to cool on a flat surface before handling or trimming.

Image: A sequence of four images demonstrating the simple operation: switching to HOT or COLD, the mode indicator turning green, inserting the document, and switching off the laminator.

4.2 การเคลือบเย็น

1. For cold lamination, use self-adhesive cold laminating pouches.
2. Turn the laminator on and select the 'COLD' mode. No warm-up time is required for cold lamination.
3. Insert the sealed edge of the cold laminating pouch into the document inlet, ensuring it is straight and centered.
4. The machine will feed the pouch through, applying pressure to seal the document.

4.3 Jam Prevention

To prevent jams, always ensure the laminating pouch is inserted straight and centered into the inlet. Do not insert multiple documents or pouches at once. Use appropriate pouch thickness (80-125 microns) for the machine.

4.4 Clearing a Jam

หากกระดาษติดขัด:

1. Immediately switch off the laminator.
2. Locate and push the ABS lever (usually on the back or side of the machine) and hold it down.
3. Gently pull the jammed document and pouch out of the inlet.
4. Release the ABS lever and restart the machine if necessary.

Image: A visual guide on how to clear a paper jam using the ABS lever: switch off, push and hold the lever, then pull the pouch out.

4.5 Lamination Tips

• For best results, use high-quality laminating pouches.
• Do not laminate heat-sensitive materials in hot mode.
• Ensure the document is completely dry before lamination.
• Trim laminated documents after they have cooled to prevent resealing.

Image: The laminator demonstrating its compatibility with various paper sizes, including A4, A5, and A6, up to 230mm (9 inches) wide.

5. การบำรุงรักษา

5.1 การทำความสะอาด

Regularly clean the exterior of the laminator with a soft, dry cloth. Do not use abrasive cleaners or solvents. For internal cleaning, run a cleaning sheet (available separately) through the machine periodically to remove adhesive residue from the rollers.

5.2 พื้นที่จัดเก็บ

When not in use, store the laminator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the power cord is neatly wrapped and not kinked.

6 การแก้ไขปัญหา

6.1 ปัญหาทั่วไปและแนวทางแก้ไข

• เครื่องไม่เปิด: Check if the power cord is securely plugged into both the laminator and the electrical outlet. Ensure the power switch is in the 'ON' position.
• Laminator Not Heating Up (Hot Mode): Verify that the mode switch is set to 'HOT' and the 'READY' light is green. If not, allow more time for preheating.
• Document Jammed: Refer to Section 4.4 'Clearing a Jam' for instructions.
• Bubbles or Wrinkles in Lamination: Ensure the laminating pouch is inserted straight and the document is flat within the pouch. Allow the machine to fully preheat (green 'READY' light) before hot lamination. Consider using a slightly thicker pouch if the issue persists.
• Lamination Not Sealing Properly: Check that the correct mode (Hot/Cold) is selected for your pouch type. For hot lamination, ensure the machine is fully preheated. Verify the pouch thickness is within the recommended range (80-125 microns).
• Slight Smoking During First Use: This is a normal vulcanization phenomenon and should dissipate after initial use. It does not affect the safety or function of the laminator.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

8.1 ข้อมูลการรับประกัน

The Crenova Laminator Machine comes with a 1-year warranty. Please refer to the warranty card included in your product packaging for detailed terms and conditions.

8.2 การสนับสนุนลูกค้า

For technical support, product inquiries, or warranty claims, please contact Crenova customer service. You can find contact information on the product packaging or the official Crenova webเว็บไซต์.