Brook Universal Fighting Board (UFB) Instruction Manual

สินค้าเกินview

The Brook Universal Fighting Board (UFB) is a versatile Printed Circuit Board (PCB) designed to provide multi-console compatibility for arcade sticks and fight sticks. It eliminates the need for multiple fight sticks for different gaming platforms, offering a unified solution for competitive and casual players.

คุณสมบัติหลัก:

• Multi-console support PS5 (With UFB-UP5)/Xb Series X/S/ Xb One / Xb 360 / PS4 / PS3 / PC / Wii U / PS Mini / MD mini. Backward-compatible PS4 games are playable on your PS5 console.
• Compatible with Brook UFB-UP5 upgrade Kit. Connect UFB-UP5 with Brook UFB, you can play PS5 fighting games on your Fightsticks.
• Build in SOCD cleaner. Headers are included. PS4 controller touchpad button simulation.
• No 8-minutes timeout issue on PS4. Effortless installation(Screw terminal block for easy connections) and Upgradable firmware.
• Console auto detection(PS3 / PS4 / Xb 360 / Xb One) and Console manual selection(PS4 / PS3 / Xb One / Xb 360 / Wii U / PS classic / MD mini).

คำแนะนำการตั้งค่า

The Brook Universal Fighting Board is designed for straightforward installation into most arcade stick enclosures.

เครื่องมือและวัสดุที่จำเป็น:

• ชุดไขควง (ปากแฉกและปากแบน)
• Wire strippers/crimpers (if not using pre-terminated wires)
• Fight stick enclosure
• Joystick and pushbuttons
• Compatible wiring harness (e.g., Brook Fighting Board Cable, sold separately)
• USB cable (Type-B to Type-A)

ขั้นตอนการติดตั้ง:

1. เตรียมสิ่งที่แนบมา: Ensure your fight stick enclosure is open and all existing wiring is disconnected or removed if you are replacing an old PCB.
2. Mount the UFB: Securely mount the Brook UFB inside the enclosure using appropriate screws or standoffs. Ensure it is placed in a location that allows for easy access to its screw terminals and USB port.



3. Connect Joystick: Connect the 5-pin joystick harness to the J3 connector on the UFB. Ensure correct orientation.
4. Connect Buttons: Connect each pushbutton's signal wire to its corresponding screw terminal (e.g., 1P, 2P, 3P, 4P, etc.) on the UFB. Connect all ground wires from the buttons and joystick to the GND terminals. The UFB's screw terminal block facilitates easy connections without soldering.
5. เชื่อมต่อ USB: Plug a USB Type-B cable into the UFB's USB port and route the other end (Type-A) out of the enclosure to connect to your console or PC.
6. ปิดสิ่งที่แนบมา: Once all connections are verified, carefully close and secure your fight stick enclosure.

คำแนะนำการใช้งาน

The Brook Universal Fighting Board features automatic console detection for most supported systems.

Automatic Console Detection:

Simply connect your fight stick to the desired console (PS3, PS4, Xbox 360, Xbox One) via the USB cable. The UFB will automatically detect the console and configure itself for use.

Manual Console Selection:

For certain consoles (Wii U, PS Classic, MD mini) or if automatic detection fails, you can manually select the console mode by holding specific buttons during power-up:

• พีเอส4: ถือ 1P (Light Punch) button.
• พีเอส3: ถือ 1K (Light Kick) button.
• เอกซ์บอกซ์ วัน: ถือ 2P (Medium Punch) button.
• Xbox 360: ถือ 2K (Medium Kick) button.
• Wii U: ถือ 3P (Heavy Punch) button.
• PS Classic / MD Mini: ถือ 3K (Heavy Kick) button.

Release the button once the fight stick is connected and recognized by the console.

PS4 Touchpad Simulation:

The UFB supports touchpad button simulation for PS4 games. Refer to the specific wiring diagram for your setup to enable this feature.

ฟังก์ชั่นเทอร์โบ:

The UFB supports turbo functionality. Consult the official Brook website or the detailed PDF manual for specific button combinations to activate and configure turbo settings.

การซ่อมบำรุง

The Brook UFB is a durable component, but proper care ensures its longevity.

• Keep the PCB clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• หลีกเลี่ยงการให้บอร์ดสัมผัสกับอุณหภูมิหรือความชื้นที่สูงเกินไป
• Ensure all wire connections are secure and free from strain. Periodically check connections for looseness.

การแก้ไขปัญหา

ปัญหาทั่วไปและวิธีแก้ไข:

Fight Stick Not Recognized by Console:

• ตรวจสอบการเชื่อมต่อ USB: Ensure the USB cable is securely connected to both the UFB and the console/PC. Try a different USB port or cable.
• Verify Console Mode: If automatic detection fails, try manually selecting the console mode by holding the appropriate button during connection (refer to "Manual Console Selection" above).
• อัปเดตเฟิร์มแวร์: Ensure the UFB firmware is up to date. Visit the official Brook webเว็บไซต์นี้มีเฟิร์มแวร์เวอร์ชั่นล่าสุดและคำแนะนำในการอัปเดต

Buttons or Joystick Not Responding:

• ตรวจสอบสายไฟ: Inspect all wire connections from the joystick and buttons to the UFB's screw terminals. Ensure they are correctly wired and securely fastened.
• ส่วนประกอบการทดสอบ: If possible, test individual buttons and the joystick with a multimeter to ensure they are functioning correctly.
• การเชื่อมต่อกราวด์: Verify that all ground wires are properly connected to the GND terminals on the UFB.

8-Minute Timeout on PS4:

• The Brook UFB is designed to prevent the 8-minute timeout issue on PS4. If you experience this, ensure your UFB is genuine and its firmware is updated to the latest version.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

ข้อมูลการรับประกัน:

For detailed warranty information regarding your Brook Universal Fighting Board, please refer to the official Brook webไซต์หรือติดต่อฝ่ายสนับสนุนลูกค้าโดยตรง

การสนับสนุนด้านเทคนิค:

If you encounter any issues not covered in this manual or require further assistance, please visit the official Brook support page or contact their technical support team.

คู่มือผู้ใช้อย่างเป็นทางการ (PDF): ดาวน์โหลดคู่มือ PDF

Brook Store: Visit Brook Store on Amazon