คู่มือผู้ใช้กล้องติดหมวกกันน็อค Fire Cam Onyx 4K

การแนะนำ

This manual provides comprehensive instructions for the Fire Cam Onyx 4K Helmet Camera. Please read this manual thoroughly before using your device to ensure proper operation and to maximize its performance and longevity. The Fire Cam Onyx 4K is designed for recording high-definition video in demanding environments, particularly for firefighters.

เนื้อหาแพ็คเกจ

Upon opening your Fire Cam Onyx 4K package, verify that all the following items are included:

• Fire Cam Onyx 4K Helmet Camera
• 32GB U3 Micro SD Card with Adapter
• 2 Rechargeable 3.7V Li-Po Batteries
• BlackJack Fire Cam Mount for US style fire helmets
• Water Resistant Cap (for audio recording)
• Waterproof Cap (no audio, for underwater use up to 30 feet)
• Spare Waterproof O-rings
• 2 Spare Glass Lenses
• สาย USB
• เครื่องชาร์จ AC Wall

สินค้าเกินview

The Fire Cam Onyx 4K is a robust helmet camera engineered for reliability and high-quality video capture in challenging conditions. Its design focuses on durability, ease of use, and superior video performance, especially in low-light environments.

Figure 1: Fire Cam Onyx 4K Helmet Camera with its mounting bracket. This image shows the compact cylindrical camera body and the robust mount designed for secure attachment.

คุณสมบัติหลัก:

• การบันทึกวิดีโอ 4K: Captures video at 4K resolution (30FPS) for exceptional clarity. Also supports 1080p at 120FPS, 60FPS, and 30FPS.
• Optimized Low Light Performance: Designed to perform effectively in challenging lighting conditions.
• โครงสร้างทนทาน: Made of heat-resistant anodized aluminum with a heat-resistant glass lens, suitable for interior firefighting environments.
• Interchangeable End Caps: Includes a water-resistant cap for audio recording and a fully waterproof cap for submerged use (up to 30 feet).
• โหมดภาพถ่าย: In addition to video, the camera can capture still images.
• การตั้งค่าที่กำหนดได้: Options for Time/Date Stamp, Time Lapse, Auto Power Off, Audio recording (with appropriate cap), and Auto Power On Record.

การตั้งค่า

1. การชาร์จแบตเตอรี่

1. Insert one of the provided 3.7V Li-Po batteries into the camera.
2. Connect the camera to the AC wall charger using the USB cable.
3. The camera will indicate charging status (e.g., an LED indicator). Ensure the camera is powered off during charging to avoid unintended recording. A full charge typically takes a few hours.

2. การใส่การ์ด Micro SD

1. Locate the Micro SD card slot on the camera body.
2. Gently insert the provided 32GB U3 Micro SD card into the slot until it clicks into place. Ensure the card is oriented correctly.

3. Attaching the Mount to a Helmet

Figure 2: The Fire Cam Onyx 4K camera securely attached to the brim of a white fire helmet using the BlackJack mount. This demonstrates the typical mounting position for operational use.

1. The BlackJack Fire Cam Mount is designed for US style fire helmets or any brim-style helmet.
2. Securely attach the mount to the helmet brim using the provided hardware. Ensure it is tightened sufficiently to prevent movement during activity.
3. Slide the Fire Cam Onyx 4K camera into the mount until it is firmly seated.

Figure 3: The Fire Cam Onyx 4K camera mounted on a black fire helmet, showcasing its integration with standard firefighting equipment. The camera is positioned to capture forward-facing video.

4. Selecting the Correct End Cap

• ใช้ Water Resistant Cap for operations where audio recording is desired. This cap allows sound to be captured from the surroundings, including radio traffic.
• ใช้ หมวกกันน้ำ when operating in submerged conditions or where maximum water protection is required. This cap does not allow audio recording.
• Ensure the O-rings are properly seated when changing caps to maintain water resistance/waterproofing.

คำแนะนำการใช้งาน

การเปิด/ปิดเครื่อง

• การเปิดเครื่อง: กดปุ่มเปิด/ปิดค้างไว้จนกว่าไฟแสดงสถานะจะสว่างขึ้น
• วิธีปิดเครื่อง: กดปุ่มเปิด/ปิดค้างไว้จนกว่าไฟแสดงสถานะจะดับ

การบันทึกวิดีโอ

1. ตรวจสอบให้แน่ใจว่ากล้องเปิดอยู่
2. Press the record button once to start video recording. The indicator light will change to confirm recording is active.
3. Press the record button again to stop recording. The indicator light will revert to standby mode.

การถ่ายภาพ

The Fire Cam Onyx 4K supports a dedicated photo mode.

1. With the camera in standby mode, press the mode button (if available, or refer to specific button functions in your quick start guide) to switch to photo mode.
2. Press the record/shutter button once to capture a still image.

Advanced Settings (Time/Date Stamp, Time Lapse, Auto Power Off, Audio, Auto Power On Record)

These settings are typically configured via a configuration file on the Micro SD card or through a dedicated software utility. Refer to the official Fire Cam website for detailed instructions on accessing and modifying these advanced settings.

• Time/Date Stamp: Enables or disables the overlay of time and date on recorded video.
• ไทม์แลปส์: Configures the camera to capture images at set intervals.
• ปิดเครื่องอัตโนมัติ: Sets a duration after which the camera will automatically power off if inactive.
• เสียง: Controls audio recording functionality (requires the water-resistant cap).
• Auto Power On Record: If enabled, the camera will automatically begin recording upon power-on.

การซ่อมบำรุง

การทำความสะอาด

• เช็ดตัวกล้องด้วยน้ำยาทำความสะอาดamp ผ้า. หลีกเลี่ยงสารเคมีที่รุนแรง
• Clean the glass lens carefully with a soft, lint-free cloth, possibly moistened with lens cleaning solution, to avoid scratches and ensure clear video quality.

การดูแลแบตเตอรี่

• เก็บแบตเตอรี่ไว้ในที่เย็นและแห้งเมื่อไม่ได้ใช้งาน
• หลีกเลี่ยงการปล่อยแบตเตอรี่จนหมดบ่อยครั้งเพื่อยืดอายุการใช้งาน
• If not using the camera for an extended period, charge batteries to about 50% before storage.

การจัดการการ์ด SD

• Regularly transfer recorded footage to a computer or external storage device.
• Format the Micro SD card periodically (e.g., monthly or after significant use) to maintain optimal performance and prevent data corruption. Always back up data before formatting.

O-Ring and Lens Inspection

• Before each use, especially when using the waterproof cap, inspect the O-rings for any signs of wear, cracks, or debris. Replace if necessary using the provided spare O-rings.
• Check the glass lens for scratches or damage. Replace with a spare lens if visibility is compromised.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For specific warranty information, please refer to the documentation included with your purchase or visit the official Fire Cam website. Fire Cam offers support for their products, including replacement parts for individual camera components.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Fire Cam customer support directly. You can often find contact information and FAQs on the official Fire Cam webเว็บไซต์: Visit the Fire Cam Store on Amazon