ฮันเตอร์ 50380

Hunter Aker 50380 52-inch Indoor Ceiling Fan with LED Light and Pull Chain

คู่มือการใช้งาน

การแนะนำ

ขอบคุณสำหรับการซื้อasing the Hunter Aker 50380 52-inch Indoor Ceiling Fan. This manual provides detailed instructions for safe installation, operation, and maintenance of your new ceiling fan. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Hunter Aker 52-inch Indoor Ceiling Fan in Brushed Nickel

Figure 1: Hunter Aker 52-inch Indoor Ceiling Fan with LED Light, Brushed Nickel Finish.

ข้อมูลด้านความปลอดภัยที่สำคัญ

การติดตั้งและการตั้งค่า

1. การแกะกล่องและการตรวจสอบส่วนประกอบ

Carefully remove all components from the packaging. Verify that all parts listed in your product's packing list are present. Included components are Blades, Light Bulb, Light Kit, Motor, and Pull Chain.

2. Mounting Options and Downrod Selection

The Hunter Aker fan supports three mounting positions: standard, low, or angled. The fan comes with a 3-inch and 2-inch downrod to ensure proper distance from the ceiling and optimize air movement. For ceilings greater than 9 feet, an extension downrod may be necessary to maintain the recommended 7-foot clearance from the floor to the fan blades.

Diagram showing ceiling fan dimensions for low profile, standard, and angled mounts with corresponding downrod lengths.

Figure 2: Fan Dimensions and Recommended Downrod Lengths based on Ceiling Height.

For ceilings 10-15 feet, subtract 9 feet from the total ceiling height to determine the appropriate downrod length. For ceilings greater than 15 feet, a 72-inch downrod is recommended.

3. Installing an Extension Downrod (if applicable)

If using an extension downrod, follow these steps. Refer to the video below for a visual guide.

Video 1: How to Choose and Install a Ceiling Fan Downrod by Hunter. This video demonstrates the process of disassembling the included downrod and reassembling it with an extension downrod, including wiring and securing the components.

  1. Disassemble the included downrod: Carefully remove the components of the short downrod that came with your fan.
  2. Reassemble to extension downrod: Attach the removed components to your desired extension downrod.
  3. Remove set screw: Locate and remove the set screw from the fan motor housing. Set it aside for later use.
  4. Thread wiring: Use a long zip tie, fish tape, or wire coat hanger to pull the fan's electrical wires through the extension downrod. Tape the end of the wires to the tool to easily pull them through.
  5. Hand tighten downrod: Screw the downrod into the fan motor housing until it stops.
  6. Securely tighten with pliers: Use pliers to securely tighten the downrod.
  7. เปลี่ยนสกรูชุด: Reinsert and tighten the set screw to lock the downrod in place.
  8. Add canopy: Slide the canopy over the downrod.

Refer to the full manual for complete fan installation instructions after the downrod is prepared.

4. การติดตั้งใบมีด

Attach the three fan blades to the motor housing. Ensure all screws are tightened securely. The blades are reversible, offering different aesthetic options.

Close-up of a single fan blade with a textured wood-grain finish.

Figure 3: Close-up of a fan blade, showing the textured side.

Close-up of a single fan blade with a smooth, solid color finish.

Figure 4: Close-up of the reverse side of a fan blade, showing the smooth finish.

5. การเดินสายไฟฟ้า

Connect the fan's electrical wires to the household wiring according to the provided wiring diagram in the complete manual and local electrical codes. Ensure all connections are secure and properly insulated.

การใช้งานพัดลมเพดานของคุณ

1. ระบบควบคุมแบบดึงโซ่

Your Aker ceiling fan is equipped with traditional pull chains for easy control:

2. Reversible Motor for Year-Round Comfort

The fan features a reversible WhisperWind motor for optimal air movement in both summer and winter:

To change the direction, locate the reverse switch on the motor housing (usually above the light kit). Ensure the fan is off before changing the direction.

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
พัดลมไม่เริ่มทำงานNo power to the fan; loose wire connections.Check circuit breaker and wall switch. Ensure all wire connections are secure.
พัดลมสั่นสกรูยึดใบใบพัดหลวม; ใบใบพัดไม่สมดุล; อุปกรณ์ยึดหลวมTighten all blade screws. Use the included balancing kit if necessary. Ensure mounting hardware is secure.
ไฟไม่ติดLoose wire connection; faulty bulb.Check light kit wiring. Replace bulb if necessary.
การทำงานมีเสียงดังLoose screws; motor hum.Check and tighten all screws. Some motor hum is normal, especially at lower speeds.

ข้อมูลจำเพาะ

ข้อมูลการรับประกัน

The Hunter Aker 50380 ceiling fan comes with a limited lifetime motor warranty, backed by Hunter Fan Company, a company with over 130 years of experience in the fan business. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hunter Fan webเว็บไซต์.

การสนับสนุนลูกค้า

If you have any questions or require further assistance with your Hunter Aker ceiling fan, please contact Hunter Customer Support: