Xerox PrimeLink B9000 Series Black Toner Cartridge (006R01766) User Manual

การแนะนำ

This manual provides essential instructions for the safe and effective installation and maintenance of your Xerox PrimeLink Black Toner Cartridge (Model 006R01766). Please read this manual thoroughly before use to ensure optimal performance and longevity of your printer and toner cartridge.

ภาพที่ 1: Xerox PrimeLink Black Toner Cartridge (Model 006R01766) shown with its retail packaging. The cartridge is a cylindrical unit, primarily light gray, with a black end cap containing the electrical contacts and gears. The packaging is a brown cardboard box with Xerox branding and product information.

ข้อมูลด้านความปลอดภัย

• เก็บตลับหมึกให้พ้นมือเด็ก
• Do not incinerate used toner cartridges.
• Avoid inhaling toner dust. If toner comes into contact with skin or eyes, wash thoroughly with water.
• Store cartridges in a cool, dry place, away from direct sunlight.

การติดตั้งและการตั้งค่า

Follow these steps to properly install the toner cartridge into your Xerox PrimeLink printer.

1. ปิดเครื่องพิมพ์: Ensure the printer is turned off and unplugged from the power source before beginning installation.
2. เปิดหน้าปก: Open the front access cover of your Xerox PrimeLink printer. Refer to your printer's specific manual for exact location.
3. ถอดตลับหมึกเก่าออก (ถ้ามี): If replacing an existing cartridge, carefully grasp the old toner cartridge and pull it straight out of the printer. Place it in a sealed bag for recycling.
4. แกะกล่องตลับหมึกใหม่: Remove the new Xerox 006R01766 toner cartridge from its packaging. Avoid touching the green drum surface or electrical contacts.
5. เขย่าตลับ: เขย่าตลับหมึกใหม่เบาๆ ในแนวนอน 5-6 ครั้ง เพื่อกระจายผงหมึกให้ทั่วถึงภายในตลับหมึก
6. แกะซีลป้องกันออก: Carefully remove any protective tapes or seals from the cartridge as indicated by the instructions on the cartridge itself.
7. ใส่ตลับหมึกใหม่: Align the new toner cartridge with the guide rails inside the printer and push it firmly until it clicks into place.
8. ปิดหน้าปก: Close the front access cover of the printer.
9. เปิดเครื่องพิมพ์: Plug in and power on the printer. The printer will typically perform a self-test and calibrate the new cartridge.

ข้อควรพิจารณาในการดำเนินงาน

Once installed, the toner cartridge operates automatically as part of your printer's system. Monitor toner levels through your printer's control panel or software utility. Replace the cartridge when the printer indicates low toner or print quality degrades significantly.

• Toner Yield: This cartridge is designed to yield approximately 71,500 pages based on ISO/IEC 19752 standards. Actual yield may vary significantly based on images printed, print settings, and other factors.
• คุณภาพการพิมพ์: For best print quality, use genuine Xerox paper and ensure your printer's firmware is up to date.

การซ่อมบำรุง

The toner cartridge itself requires minimal maintenance. Focus on maintaining the printer environment.

• พื้นที่จัดเก็บ: Store unused toner cartridges in their original sealed packaging in a cool, dry place.
• การทำความสะอาด: If toner spills, use a dry cloth to wipe it up. Do not use water, as toner is designed to be water-resistant. A small vacuum cleaner designed for toner spills can also be used.
• การรีไซเคิล: Xerox encourages responsible recycling of used toner cartridges. Visit the official Xerox website for recycling programs and instructions. Xerox Recycling Program

การแก้ไขปัญหาทั่วไป

If you encounter issues after installing the toner cartridge, consider the following:

• ข้อความ "หมึกเหลือน้อย" หรือ "โปรดเติมหมึก": Ensure the cartridge is fully seated. If the message persists with a new cartridge, restart the printer. If it's an old cartridge, it's time for replacement.
• Poor Print Quality (Fading, Streaks): Gently shake the cartridge horizontally to redistribute toner. Check for any protective seals that might not have been fully removed. Ensure the printer's drum unit (if separate) is clean and functioning correctly.
• ระบบไม่รู้จักตลับหมึก: Power off the printer, remove the cartridge, check for any obstructions or damage to the electrical contacts on both the cartridge and the printer, then reinsert and power on.

For more detailed troubleshooting, refer to your specific Xerox PrimeLink printer's user manual or contact Xerox support.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Xerox toner cartridges are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Xerox webเว็บไซต์.

For technical support, product information, or to locate authorized service centers, please visit the official Xerox support page:

ฝ่ายสนับสนุนของซีร็อกซ์ Webเว็บไซต์