คู่มือการใช้งานอะแดปเตอร์เราเตอร์ Mafell LO-FA 207200

1. บทนำ

Thank you for choosing the Mafell LO-FA 207200 Router Adapter. This precision accessory is designed to enhance the capabilities of your Mafell LO 65 Ec router, enabling accurate and repeatable routing operations such as circle cutting, arc routing, and precise edge guiding. This manual provides essential information for the safe and effective use of your new adapter. Please read it thoroughly before operation and keep it for future reference.

2. คำแนะนำด้านความปลอดภัย

Always observe the following safety precautions when using the LO-FA 207200 Router Adapter in conjunction with your Mafell LO 65 Ec router:

• อ่านคู่มือเราเตอร์: Always refer to the instruction manual of your Mafell LO 65 Ec router for comprehensive safety guidelines related to the power tool itself.
• อุปกรณ์ป้องกันส่วนบุคคล (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, and a dust mask, when operating the router.
• การตัดการเชื่อมต่อไฟฟ้า: Disconnect the router from the power supply before making any adjustments, changing bits, or performing maintenance on the adapter or router.
• ชิ้นงานที่ปลอดภัย: ตรวจสอบให้แน่ใจว่าชิ้นงานอยู่ในตำแหน่งที่ปลอดภัยamped or held to prevent movement during routing operations.
• เอกสารแนบที่เหมาะสม: Verify that the LO-FA 207200 adapter is correctly and securely attached to the router before each use. Loose attachments can lead to loss of control and injury.
• พื้นผิวการทำงานที่มั่นคง: Work on a stable, level, and well-lit surface.
• การดูดฝุ่น: Utilize dust extraction systems to minimize airborne dust, especially when routing materials that produce fine particles.
• ตรวจสอบก่อนใช้งาน: Before each use, inspect the adapter for any damage, wear, or loose components. Do not use if damaged.

3. สินค้าหมดview

The Mafell LO-FA 207200 Router Adapter is a robust accessory designed for precision routing. It consists of several key components that facilitate various routing tasks.

รูปที่ 3.1: เกินview of the Mafell LO-FA 207200 Router Adapter showing its main components including the base, guide rods, adjustment knobs, and clampกลไกการทำงาน

ส่วนประกอบหลัก:

• Main Adapter Body: The central frame that attaches to the router and supports the guide mechanisms.
• แท่งนำ: Two parallel rods that allow for precise linear movement or pivot for circular cuts.
• ปุ่มปรับ: Used to set the milling radius for circular cuts or the offset for edge guiding.
• Clampกลไกการทำงาน: Securely fasten the adapter to the router and lock guide rod positions.
• Stop Jaws: Adjustable components for precise edge guiding (adjustment range: 0 - 54 mm).
• Height Compensation Plate: Allows for a 6 mm height compensation.

4. การตั้งค่า

Proper setup of the LO-FA 207200 adapter is crucial for accurate and safe operation.

4.1 Attaching the Adapter to the Router

1. Ensure your Mafell LO 65 Ec router is unplugged from the power source.
2. Align the mounting points of the LO-FA 207200 adapter with the corresponding attachment points on the base of your Mafell LO 65 Ec router.
3. Securely fasten the adapter using the provided screws or clamping mechanisms. Ensure there is no wobble or play.

4.2 Adjusting for Circle Routing

To cut circles or arcs, the adapter uses a pivot point. The milling radius can be adjusted from 97 mm to 380 mm.

1. Insert the compass pin into the designated bore on the adapter. The compass pin bore diameter is 4.5 mm.
2. Loosen the adjustment knobs on the guide rods.
3. Slide the router along the guide rods until the desired milling radius is achieved. Measure from the center of the router bit to the center of the compass pin.
4. Tighten the adjustment knobs firmly to lock the radius setting.

4.3 Adjusting for Edge Guiding

For straight edge routing, the adjustable stop jaws are used.

1. Loosen the locking mechanisms for the stop jaws.
2. Adjust the stop jaws to the desired offset from the router bit. The adjustment range is 0 - 54 mm.
3. Ensure both stop jaws are parallel to the router bit and tighten their locking mechanisms.

4.4 Height Compensation

The adapter offers a 6 mm height compensation feature, useful for specific routing depths or material thicknesses. Consult your router's manual for detailed depth setting procedures.

5. คู่มือการใช้งาน

Once the LO-FA 207200 adapter is properly set up, you can begin your routing operation.

5.1 เคล็ดลับการใช้งานทั่วไป

• Always perform a test cut on scrap material to verify settings and ensure desired results.
• Maintain a firm grip on the router and adapter during operation.
• Move the router smoothly and consistently through the material. Avoid forcing the tool.
• For deeper cuts, make multiple passes, increasing ความลึกในแต่ละครั้งที่ทำการเจาะ

5.2 Circle Routing Technique

Figure 5.1: The Mafell LO-FA 207200 Router Adapter in use for cutting a precise circle. The compass pin acts as a pivot point, guiding the router along the desired radius.

1. Mark the center point of your desired circle on the workpiece.
2. Drill a small pilot hole at the center point, suitable for the compass pin.
3. Insert the compass pin into the pilot hole.
4. With the router bit clear of the workpiece, turn on the router.
5. Slowly plunge the router bit into the material and begin rotating the router around the compass pin in a clockwise direction for conventional routing, or counter-clockwise for climb routing (refer to router manual for bit rotation and feed direction).
6. Maintain consistent pressure and speed for a clean cut.

5.3 Edge Guiding Technique

Figure 5.2: The Mafell LO-FA 207200 Router Adapter being used to guide the router along a straight edge of a workpiece. The adjustable stop jaws maintain a consistent distance from the edge.

รูปที่ 5.3: ตัวปิด view of the Mafell LO-FA 207200 Router Adapter during operation, highlighting the router's position relative to the adapter and the importance of dust management.

1. Ensure the stop jaws are correctly set for the desired offset from the edge.
2. Place the adapter's stop jaws firmly against the edge of the workpiece.
3. With the router bit clear of the workpiece, turn on the router.
4. Slowly plunge the router bit into the material.
5. Guide the router along the edge, keeping the stop jaws consistently pressed against the workpiece edge.
6. Maintain a steady feed rate for a smooth and even cut.

6. การบำรุงรักษา

Regular maintenance will ensure the longevity and optimal performance of your LO-FA 207200 Router Adapter.

• การทำความสะอาด: After each use, disconnect the adapter from the router and clean it thoroughly. Remove all dust, wood chips, and debris using a brush or compressed air. Avoid using solvents that may damage the material.
• การตรวจสอบ: Periodically inspect all components for signs of wear, damage, or deformation. Pay close attention to guide rods, adjustment mechanisms, and clampคะแนน
• การหล่อลื่น: Lightly lubricate the guide rods and any moving parts with a dry lubricant or silicone spray to ensure smooth operation. Avoid excessive lubrication that can attract dust.
• พื้นที่จัดเก็บ: Store the adapter in a clean, dry place, away from direct sunlight and extreme temperatures. Protect it from impacts that could cause misalignment or damage.

7 การแก้ไขปัญหา

If you encounter issues with your LO-FA 207200 Router Adapter, refer to the following common problems and solutions:

8. ข้อมูลจำเพาะ

Technical specifications for the Mafell LO-FA 207200 Router Adapter:

• แบบอย่าง: LO-FA 207200
• ความเข้ากันได้: Mafell LO 65 Ec Router
• Milling Radius: 97 - 380 มม.
• Height Compensation: 6 มม.
• Compass Pin Bore Diameter: 4.5 มม.
• Stop Jaw Adjustment Range: 0 - 54 มม.
• น้ำหนัก: 1.5 กก. (โดยประมาณ)
• วัสดุ: Aluminium, Acrylonitrile Butadiene Styrene (ABS)

9. การรับประกันและการสนับสนุน

For information regarding warranty coverage, spare parts, or technical support for your Mafell LO-FA 207200 Router Adapter, please contact your authorized Mafell dealer or visit the official Mafell webไซต์ โปรดเก็บใบเสร็จรับเงินของคุณไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ

Note: Information regarding spare parts availability for this specific model is currently unavailable in our records. Please contact Mafell customer service for the most up-to-date information.