คู่มือการใช้งานสายรัดเครื่องมือ Safewaze SW417 ขนาด 5 ปอนด์ - ยาว 24 นิ้ว

1. สินค้าหมดview

The SafeWaze SW417 Tool Tether is a critical safety device designed to prevent tools from falling when working at height. This 24-inch (61 cm) tether is engineered to securely connect tools weighing up to 5 lbs (2.27 kg) to an anchor point, such as a worker's harness, tool belt, or a fixed structure. It serves as an essential component in a comprehensive fall prevention strategy for tools, enhancing safety in various industrial, construction, solar, wind, tower, energy, and general safety markets.

Image: The SafeWaze SW417 Tool Tether, featuring a bright neon green webbing strap and two robust silver snap hooks at each end. The webbing includes a label with product specifications.

2. ข้อมูลด้านความปลอดภัย

Adherence to safety guidelines is paramount when using the SW417 Tool Tether. Failure to follow these instructions may result in serious injury or property damage.

• การตรวจสอบก่อนใช้งาน: Always perform a thorough visual inspection of the tether before each use. Check the webbing for cuts, abrasions, fraying, discoloration, or chemical damage. Inspect the snap hooks for deformation, cracks, corrosion, or proper gate operation.
• ความจุน้ำหนัก: Do not exceed the tether's maximum load capacity of 5 lbs (2.27 kg). Overloading can lead to tether failure.
• วัตถุประสงค์: This tether is designed for tool retention only. It is ไม่ intended for personal fall arrest, rescue, or lifting applications.
• ความเข้ากันได้: Ensure the tether is compatible with the tools and anchor points being used.
• ปัจจัยด้านสิ่งแวดล้อม: Avoid exposure to extreme temperatures, sharp edges, open flames, or corrosive chemicals, which can degrade the tether's integrity.
• อุปกรณ์ที่เสียหาย: Any tether showing signs of damage, excessive wear, or that has been subjected to a significant impact (e.g., stopping a falling tool) must be immediately removed from service and replaced. Do not attempt to repair damaged equipment.
• การฝึกอบรม: Users must be trained in proper fall protection practices and the safe use of tool tethers.

3. การตั้งค่าและการติดตั้ง

Proper attachment of the tool tether is crucial for effective fall prevention.

1. Tool Attachment: Select a tool that weighs 5 lbs (2.27 kg) or less. Attach one of the snap hooks of the SW417 Tool Tether to a secure attachment point on the tool. This could be a dedicated lanyard hole, a closed handle, or a robust part of the tool designed for tethering. Ensure the snap hook gate is fully closed and locked.
2. Anchor Point Attachment: Attach the other snap hook of the tether to a suitable anchor point. Common anchor points include a D-ring on a fall protection harness, a dedicated tool lanyard attachment point on a tool belt, or a secure fixed structure. Ensure the snap hook gate is fully closed and locked.
3. ตรวจสอบการเชื่อมต่อ: Before beginning work, gently tug on both ends of the tether to confirm that both connections are secure and properly engaged.
4. การวางตำแหน่ง: Position the tether so that it does not interfere with your movement or create a snagging hazard. Avoid routing the tether over sharp edges.

4. คู่มือการใช้งาน

Once the SW417 Tool Tether is properly installed, it facilitates safe tool handling at height.

• การใช้เครื่องมือ: Use the tethered tool as intended. The tether provides a safety net, preventing the tool from free-falling if accidentally dropped.
• Maintain Awareness: Be aware of the tether's position during work to prevent it from becoming tangled with other equipment or creating a tripping hazard.
• Tool Transfer: When transferring tools between workers, ensure the tether remains attached to one person or a secure anchor point until the transfer is complete and the tool is safely tethered by the receiving party.
• Avoid Slack: While some slack is necessary for tool manipulation, avoid excessive slack that could allow a tool to gain significant momentum before being caught, increasing impact force.

5. การบำรุงรักษา

Proper maintenance extends the life and ensures the reliability of your tool tether.

• การทำความสะอาด: Clean the tether regularly with a mild soap and water solution. Rinse thoroughly with clean water.
• การอบแห้ง: Allow the tether to air dry completely in a clean, well-ventilated area, away from direct sunlight, heat sources, or open flames. Do not use forced heat to dry.
• พื้นที่จัดเก็บ: Store the tether in a cool, dry, clean environment, free from chemicals, corrosive vapors, extreme temperatures, and direct sunlight. Protect it from mechanical damage, sharp objects, and pests.
• การตรวจสอบเป็นระยะ: In addition to pre-use inspections, conduct more detailed periodic inspections as per your company's safety protocols or at least every six months, documented by a competent person.

6 การแก้ไขปัญหา

This section addresses common issues you might encounter with the SW417 Tool Tether.

7. ข้อมูลจำเพาะ

• แบบอย่าง: SW417
• ยี่ห้อ: SafeWaze
• หมายเลขชิ้นส่วน: SW417
• Tether Length: 24 นิ้ว (ประมาณ 61 เซนติเมตร)
• ความจุโหลดสูงสุด: 5 ปอนด์ (ประมาณ 2.27 กก.)
• ตัวเชื่อมต่อ: Two snap hooks
• วัสดุ: ทนทาน webbing and metal hardware

8. การรับประกันและการสนับสนุน

For specific warranty information regarding your SafeWaze SW417 Tool Tether, please refer to the documentation provided with your purchase or visit the official SafeWaze website. For technical support, product inquiries, or assistance with any issues not covered in this manual, please contact SafeWaze customer service directly. Retain your proof of purchase for any warranty claims.

ผู้ผลิต: SafeWaze

Note: Product specifications and design are subject to change without notice. Always refer to the latest product documentation and safety standards.