เนิร์ฟ E9952

Nerf Elite 2.0 Volt SD-1 Blaster Instruction Manual

รุ่น : E9952

สินค้าเกินview

The Nerf Elite 2.0 Volt SD-1 Blaster is designed for enhanced targeting and customizable play. This compact blaster comes with 6 Official Nerf darts and features a light beam for improved accuracy in low-light conditions. It also includes 2 tactical rails for attaching accessories (sold separately) and built-in storage for 2 darts, ensuring quick reloads during play.

Nerf Elite 2.0 Volt SD-1 Blaster in packaging

Image: Nerf Elite 2.0 Volt SD-1 Blaster in its retail packaging, showcasing the blaster, darts, and key features.

ส่วนประกอบ

Your Nerf Elite 2.0 Volt SD-1 Blaster package includes:

Nerf Elite 2.0 Volt SD-1 Blaster with 6 darts

Image: The Nerf Elite 2.0 Volt SD-1 Blaster displayed alongside its 6 included Official Nerf Darts.

การตั้งค่า

Battery Installation (for Light Beam)

The light beam targeting feature requires 2 AAA batteries (not included). To install:

  1. ค้นหาช่องใส่แบตเตอรี่บนเครื่องระเบิด
  2. ใช้ไขควงปากแฉก (ไม่ได้แถมมาให้) คลายสกรูฝาครอบช่องใส่แบตเตอรี่ออก
  3. ใส่แบตเตอรี่ AAA จำนวน 2 ก้อน โดยตรวจสอบให้แน่ใจว่าขั้วถูกต้อง (+/-)
  4. ใส่ฝาครอบกลับเข้าที่แล้วขันให้แน่นด้วยสกรู

การโหลดลูกดอก

To load a dart into the blaster:

  1. Insert one Official Nerf dart into the barrel at the front of the blaster. Push it in firmly until it is seated properly.
  2. For quick reloads, store up to 2 additional darts in the built-in storage slots located in the handle of the blaster.
ด้านหน้า view of Nerf Elite 2.0 Volt SD-1 Blaster

ภาพ: ด้านหน้า view of the Nerf Elite 2.0 Volt SD-1 Blaster, showing the barrel where darts are loaded.

คำแนะนำการใช้งาน

Priming and Firing

  1. Ensure a dart is loaded into the barrel.
  2. Pull the priming handle at the back of the blaster all the way back until it clicks into place. This primes the blaster for firing.
  3. เล็งไปที่เป้าหมายของคุณ
  4. กดไกปืนเพื่อยิงลูกดอก

Using the Light Beam Targeting

To activate the light beam for enhanced targeting:

  1. Locate the light beam switch on the front underside of the blaster.
  2. Slide the switch to the 'ON' position to activate the light beam.
  3. The light beam will project a red dot onto your target, assisting with aim up to 15 feet (4.5 meters) away.
  4. เลื่อนสวิตช์ไปที่ตำแหน่ง 'ปิด' เมื่อไม่ใช้งานเพื่อประหยัดแบตเตอรี่

วิดีโอ: ผลิตภัณฑ์เหนือview demonstrating the features and operation of the Nerf Elite 2.0 Volt SD-1 Blaster.

วิดีโอ: วิดีโอแสดงผลิตภัณฑ์อย่างเป็นทางการasing the Nerf Elite 2.0 Volt SD-1 Blaster in action, highlighting its light beam and dart storage.

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Dart does not fire or jamsBlaster not fully primed; Damaged dart; Non-Official dart usedPull priming handle all the way back until it clicks; Replace dart with a new, Official Nerf dart
Light beam is dim or not workingLow or dead batteries; Batteries incorrectly installed; Light beam switch is offReplace batteries; Check battery polarity; Slide light beam switch to 'ON'

ข้อมูลจำเพาะ

ข้อมูลด้านความปลอดภัย

คำเตือน: เพื่อป้องกันการบาดเจ็บที่ดวงตา:

สนับสนุน

For further assistance or inquiries, please contact the manufacturer directly. Refer to the product packaging for contact details.