Tackform Enduro Series 3.5-inch Aluminum Dual Articulating Arm

1. สินค้าหมดview

The Tackform Enduro Series 3.5-inch Aluminum Dual Articulating Arm is designed for versatile device mounting. It features dual articulating 20mm ball sockets and thumbscrews for quick and precise adjustments. This arm is a core component of the Tackform Enduro Series, an ecosystem of mounting solutions.

• ความเข้ากันได้: Fully compatible with all Tackform Enduro Series 20mm components, including suction cups, table clamps, headrest clamps, and various device holders (phones, tablets, action cameras).
• การก่อสร้าง: Constructed entirely from aluminum for durability and strength. Thumbscrews are made of ABS Plastic.
• ความยาว: Total arm length is 3.5 inches.
• การออกเสียง: Dual ball and socket joints provide multiple points of articulation for optimal device positioning.
• ความอเนกประสงค์: Can be used to replace existing arms for different lengths or to add articulation points with ball-to-ball adapters.

2 ส่วนประกอบ

The Tackform Dual Articulating Arm consists of a central aluminum arm with two 20mm ball sockets at each end. Each socket is secured by a thumbscrew for independent adjustment.

Figure 1: The Tackform 3.5-inch Aluminum Dual Articulating Arm.

Figure 2: The 3.5-inch length of the articulating arm.

Figure 3: The arm is compatible with 20mm Enduro Series components.

3. การตั้งค่าและการติดตั้ง

To set up your Tackform Dual Articulating Arm, follow these steps:

1. Loosen Thumbscrews: Gently loosen the thumbscrews on both ends of the arm to allow the ball sockets to open.
2. Insert Ball Mounts: Insert your desired 20mm ball mounts (e.g., a base mount and a device holder) into each socket. Ensure the balls are fully seated within the sockets.
3. Tighten Thumbscrews: Hand-tighten the thumbscrews to secure the ball mounts. Do not overtighten.
4. ปรับตำแหน่ง: Loosen one thumbscrew slightly to adjust the angle of that specific ball joint. Once the desired angle is achieved, re-tighten the thumbscrew. Repeat for the other joint if necessary.

For a visual guide on attaching and securing the arm, please refer to the official product overview video below.

Additional demonstrations of 20mm ball arm functionality can be seen in the following videos:

4. การดำเนินการ

The dual articulating design allows for flexible positioning of your mounted device. Each thumbscrew independently controls the tightness of its respective ball socket, enabling precise adjustments without affecting the other joint.

Figure 4: The arm allows for 180-degree rotation at each joint.

Figure 5: The ball joints enable full 360-degree rotation for optimal viewมุมการเอียง

To adjust the arm:

1. คลาย: Turn the desired thumbscrew counter-clockwise to loosen the grip on the ball.
2. ตำแหน่ง: Adjust the angle and orientation of the attached device or base.
3. ปลอดภัย: Turn the thumbscrew clockwise to tighten and secure the ball in its new position. Ensure it is firm to prevent movement during use.

Figure 6: The arm can be used in various configurations, such as mounting an action camera or a tablet.

5. การบำรุงรักษา

To ensure the longevity and optimal performance of your Tackform Dual Articulating Arm, consider the following maintenance tips:

• การทำความสะอาด: Wipe the aluminum arm and ABS plastic thumbscrews with a soft, damp ใช้ผ้าเช็ดทำความสะอาดฝุ่นและคราบสกปรก หลีกเลี่ยงน้ำยาทำความสะอาดหรือตัวทำละลายที่มีฤทธิ์กัดกร่อนซึ่งอาจทำลายพื้นผิวได้
• การตรวจสอบ: Periodically inspect the arm and thumbscrews for any signs of wear, damage, or loosening.
• ความแน่น: Ensure all thumbscrews are adequately tightened before each use to prevent accidental movement or detachment of your device.

6 การแก้ไขปัญหา

If you encounter any issues with your Tackform Dual Articulating Arm, please consider the following:

• Arm does not hold position: Ensure both thumbscrews are fully tightened. If using a rubberized ball, confirm it is properly seated within the socket.
• ความยากลำบากในการปรับตัว: Loosen the thumbscrews sufficiently to allow free movement of the ball joints. If the arm is new, it may require a few adjustments to loosen up.
• ปัญหาความเข้ากันได้: Verify that all connected components are 20mm ball compatible. This arm is specifically designed for 20mm ball systems.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

This product is manufactured by Tackform. For any warranty claims, technical support, or product inquiries, please contact Tackform directly through their official customer service channels. Refer to the product packaging or the Tackform webเว็บไซต์สำหรับข้อมูลการติดต่อล่าสุด