คู่มือการใช้งานสวิตช์รีเลย์ควบคุมระยะไกลไร้สาย RF 2 ช่องสัญญาณ 433MHz รุ่น QIACHIP KR2202

1. บทนำ

This manual provides detailed instructions for the installation, operation, and maintenance of the QIACHIP KR2202 2-Channel 433MHz Wireless RF Remote Control Relay Switch. This universal switch is designed for controlling various electrical devices such as garage door openers, LED lights, and motors, offering flexible functionality with adjustable working modes.

2. ข้อมูลด้านความปลอดภัย

• ควรตัดกระแสไฟก่อนการติดตั้งหรือบำรุงรักษาทุกครั้งเพื่อป้องกันไฟฟ้าช็อต
• Ensure all wiring connections are secure and correctly matched to the power source and load.
• ไม่เกินปริมาตรที่กำหนดtagค่า e และค่ากระแสไฟฟ้าของอุปกรณ์
• เก็บอุปกรณ์ให้ห่างจากน้ำ ความชื้น และอุณหภูมิที่สูงเกินไป
• This device is intended for indoor use or in protected enclosures.

3. เนื้อหาบรรจุภัณฑ์

• 1 x KR2202 2-Channel Wireless RF Receiver Module
• 2 x 433MHz FCC ID Transmitters (Remote Controls)
• 1 x Receiver Case

Image: QIACHIP KR2202 receiver module, protective case, and four remote controls.

4. ข้อมูลจำเพาะผลิตภัณฑ์

5. การติดตั้งและการเดินสายไฟ

The KR2202 receiver module supports various wiring configurations for different applications. Always ensure power is disconnected before making any wiring changes.

5.1 General Connection Modes

Image: Diagrams illustrating various circuit connection modes for the QIACHIP KR2202, including AC power, DC power, and different load types.

This diagram shows common wiring setups for AC and DC loads. Pay close attention to the Live (L) and Neutral (N) connections for AC power, and Positive (+) and Negative (-) for DC power. The relay outputs provide Normally Open (NO), Common (COM), and Normally Closed (NC) contacts for flexible control.

5.2 Wiring Diagram for Motors

Image: Wiring diagram for connecting the KR2202 to a DC motor for forward and reverse rotation using AC 85-220V input.

For controlling a DC motor with forward and reverse rotation, connect the AC 85-220V input to the 'IN' terminals. The DC motor's two wires are connected to terminals 5 and 2. The positive pole of the external DC power supply connects to terminals 6 and 3, and the negative pole connects to terminals 1 and 4. The live wire of the 220V AC power supply connects to the L interface, and the neutral wire to the N interface, powering the controller.

5.3 Wiring Diagram for Lights

Image: Wiring diagram for connecting the KR2202 to DC lamps using AC 85-220V input.

To control two DC lamps, connect the positive poles of the lamps to terminals 6 and 3 respectively. The negative poles of the lamps connect to the negative pole of the external DC power supply. The positive pole of the external DC power supply connects to interfaces 5 and 2 respectively. The live wire of the AC power supply connects to the L interface, and the neutral wire connects to the N interface.

6. Remote Control Pairing and Operation

The KR2202 receiver supports Momentary, Toggle, and Latched modes. Follow these steps to pair your remote controls and set the desired operating mode.

6.1 การล้างรหัสที่มีอยู่

1. Press the 'Learning Button' on the receiver module 8 times.
2. The indicator light will flash and then go out, indicating that all previously paired remote controls have been cleared.

6.2 Momentary Mode Pairing

In Momentary mode, the relay activates only while the remote button is pressed and deactivates upon release.

1. Press the 'Learning Button' on the receiver module 1 time. The indicator light will turn on.
2. Press the first button (e.g., 'A') on your remote control. The indicator light will flash and then go out.
3. Press the second button (e.g., 'B') on your remote control. The indicator light will flash and then go out.
4. Pairing is successful. Now, pressing 'A' will activate one relay, and pressing 'B' will activate the other, as long as the button is held down.

6.3 Toggle Mode Pairing

In Toggle mode, pressing a button once activates the relay, and pressing the same button again deactivates it.

1. Press the 'Learning Button' on the receiver module 2 times. The indicator light will turn on.
2. Press the first button (e.g., 'A') on your remote control. The indicator light will flash and then go out.
3. Press the second button (e.g., 'B') on your remote control. The indicator light will flash and then go out.
4. Pairing is successful. Press 'A' to turn on/off the first relay, and 'B' to turn on/off the second relay.

6.4 Latched Mode Pairing

In Latched mode, pressing one button activates a relay, and pressing another button deactivates it. This mode typically requires a remote with at least two distinct buttons for each channel (e.g., 'A' for ON, 'B' for OFF).

1. Press the 'Learning Button' on the receiver module 3 times. The indicator light will turn on.
2. Press the first button (e.g., 'A') on your remote control. The indicator light will flash and then go out.
3. Press the second button (e.g., 'B') on your remote control. The indicator light will flash and then go out.
4. Pairing is successful. Press 'A' to activate the first relay, and 'B' to deactivate it.

Important Note for Latched Mode:

• A remote control will only match two buttons in Latched mode. Any extra buttons on a 4-button remote will not be paired.
• To change the mode for a remote, you must first clear all existing codes (Section 6.1) and then re-pair the remote in the desired mode.

Image: Diagrams illustrating the steps for pairing remote controls in Momentary, Toggle, and Latched modes with the QIACHIP KR2202 receiver.

7. การสมัคร

The QIACHIP KR2202 is versatile and can be used in a wide range of applications, from simple domestic remote control to autonomous control systems.

• Garage Door Openers: Control the opening and closing of garage doors.
• ไฟ LED: Remotely switch LED lighting on or off.
• การควบคุมมอเตอร์: Manage the operation of various AC or DC motors, including forward and reverse rotation.
• เครื่องใช้ไฟฟ้าภายในบ้าน: Integrate into smart home systems for remote control of appliances.
• Electric Gates & Shutter Doors: Automate access control for gates and rolling shutters.
• Alarm Systems: Can be used as part of a security or alarm system.
• อุปกรณ์ยก: Control small lifting mechanisms.

Image: Illustrations of various applications for the QIACHIP KR2202, including motor control, shutter doors, home appliances, electric gates, workshop management, and DC lighting.

8. การบำรุงรักษา

• การเปลี่ยนแบตเตอรี่: The remote controls require CR2032 batteries. Replace them when the transmission range decreases or the indicator light on the remote does not illuminate.
• การทำความสะอาด: Use a dry, soft cloth to clean the receiver module and remote controls. Avoid using liquids or abrasive cleaners.
• เสาอากาศ: Ensure the receiver's antenna is uncoiled and extended for optimal signal reception.

9 การแก้ไขปัญหา

• รีโมตไม่ตอบสนอง: Check remote battery. Ensure the remote is paired correctly to the receiver in the desired mode. Verify the receiver has power.
• ช่วงที่ลดลง: Replace remote battery. Ensure the receiver's antenna is fully extended and not obstructed. Minimize interference from other RF devices.
• อุปกรณ์ไม่ทำงาน: Check all wiring connections for tightness and correctness. Verify the power supply to both the receiver and the controlled device. Ensure the relay contacts are properly connected to the load.
• Incorrect operation mode: Clear all codes and re-pair the remote in the correct Momentary, Toggle, or Latched mode as per Section 6.

10. การรับประกันและการสนับสนุน

QIACHIP products are designed for reliability and performance. For any issues or technical support, please contact QIACHIP customer service. Keep your purchase receipt for warranty claims. The manufacturer is QIACHIP.