Ickle Bubba Coleby Classic Cot Bed Instruction Manual

การแนะนำ

This instruction manual provides essential information for the safe and proper assembly, use, and maintenance of your Ickle Bubba Coleby Classic Cot Bed. Please read this manual thoroughly before assembly and retain it for future reference.

The Ickle Bubba Coleby Classic Cot Bed is a versatile 3-in-1 convertible cot designed to grow with your child, suitable from birth up to approximately 4 years of age. It features an adjustable mattress base and protective teething rails.

ข้อมูลด้านความปลอดภัย

• Always ensure all assembly fittings are tightened correctly. Regularly check all fittings and re-tighten as necessary.
• Do not use the cot bed if any parts are broken, torn, or missing. Contact Ickle Bubba for replacement parts.
• The mattress base is adjustable to three heights. The lowest position is the safest when the child can sit unaided.
• Ensure the cot bed is placed on a firm, horizontal surface.
• Do not place the cot bed near open fires or other sources of strong heat, such as electric bar fires, gas fires, etc.
• Do not leave anything in the cot bed that could provide a foothold for your child to climb out, or present a danger of suffocation or strangulation.
• The cot bed is designed for one child only.
• The maximum mattress thickness for this cot bed is 10cm.

รายการส่วนประกอบ

Before assembly, please verify that all components are present and undamaged. Refer to the assembly diagram for identification of parts.

การติดตั้งและการประกอบ

Assembly requires two adults. Ensure you have adequate space and all components before beginning. Do not use power tools for assembly as this may overtighten fittings and cause damage.

Step 1: Attach Side Rails to End Panels (Cot Mode)

Align the holes on the cot side rails (B) with the pre-drilled holes on the cot end panels (A). Secure using the provided bolts and barrel nuts from the hardware pack (E). Ensure the teething rails (D) are facing upwards and inwards.

ภาพ: ด้านข้าง view of the Ickle Bubba Coleby Classic Cot Bed, showing the assembled frame.

Step 2: Install Mattress Base

The mattress base (C) can be set at three different heights. Choose the appropriate height based on your child's age and development:

• ตำแหน่งสูงสุด: For newborns and infants who cannot sit up unaided. This allows easier access to your baby.
• ตำแหน่งกลาง: For babies who are starting to sit up.
• ตำแหน่งต่ำสุด: For babies who can sit unaided or pull themselves to a standing position. This is the safest position to prevent climbing out.

Insert the mattress base (C) into the grooves on the cot end panels (A) at your desired height. Secure it with the remaining hardware. Ensure the base is level and firmly secured.

Image: Cot bed with mattress base in the highest position.

Image: Cot bed with mattress base in the middle position.

Image: Cot bed with mattress base in the lowest position.

การแปลงเป็นเตียงเด็กเล็ก

To convert the cot into a toddler bed, remove both cot side rails (B). The cot end panels (A) will serve as the headboard and footboard for the toddler bed. Ensure the mattress base (C) is set to the lowest position for the toddler bed configuration. No additional parts are required for this conversion.

Image: The Ickle Bubba Coleby Classic Cot Bed converted into a toddler bed.

คำแนะนำการใช้งาน

การจัดวางที่นอน

Place a suitable mattress (not included) onto the mattress base. The recommended mattress size for this cot bed is 140cm x 70cm, with a maximum thickness of 10cm. Ensure there are no gaps larger than 30mm between the mattress and the sides of the cot bed.

การปรับความสูงของที่นอน

To adjust the mattress height, you will need to partially disassemble the cot. Carefully remove the mattress and mattress base. Re-attach the mattress base to the desired height setting using the appropriate pre-drilled holes on the end panels. Always ensure all fittings are securely tightened after adjustment.

การบำรุงรักษาและการดูแล

• การทำความสะอาด: เช็ดทำความสะอาดด้วยโฆษณาamp cloth and mild detergent. Do not use abrasive cleaners or strong chemicals. Dry thoroughly after cleaning.
• การตรวจสอบ: Regularly inspect all components for wear and tear, loose fittings, or damage. Pay particular attention to the teething rails.
• ฟิตติ้ง: Periodically check and re-tighten all bolts and screws to ensure the cot bed remains stable and secure.
• พื้นที่จัดเก็บ: If storing the cot bed, disassemble it carefully and store all parts in a dry, cool place away from direct sunlight and extreme temperatures.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

Image: Diagram showing the dimensions of the Ickle Bubba Coleby Classic Cot Bed.

การรับประกันและการสนับสนุน

Ickle Bubba products are manufactured to high-quality standards. For information regarding warranty coverage, product registration, or to obtain replacement parts, please visit the official Ickle Bubba webไซต์หรือติดต่อฝ่ายสนับสนุนลูกค้าโดยตรง

Webเว็บไซต์: www.icklebubba.com

ติดต่อ: อ้างถึง website for current contact details, including phone numbers and email addresses for customer service.