LIGHTAILING 10255

LIGHTAILING LED Light Kit for LEGO Creator Expert The Assembly Square (Model 10255)

คู่มือการใช้งาน

1. สินค้าหมดview

This LIGHTAILING LED Light Kit is designed to illuminate the LEGO Creator Expert The Assembly Square building set (LEGO Model 10255). The kit enhances the visual appeal of your model by adding intricate lighting details.

เนื้อหาชุด:

  • 5 USB Light kits
  • คู่มือการใช้งาน
  • กล่องใส่แบตเตอรี่
  • ขั้วต่อ USB 1

The components are crafted from original materials and assembled by hand to ensure quality and compatibility.

Contents of the LIGHTAILING LED Light Kit package, including light strings, battery box, and instructions.
Figure 1: Package contents of the LIGHTAILING LED Light Kit. This image displays the various components included in the kit, such as individually packaged light strings, a battery box, and the instruction manual.

2. การตั้งค่าและการติดตั้ง

The LIGHTAILING LED Light Kit is designed for integration with your existing LEGO Creator Expert The Assembly Square (Model 10255) set. Please note that the LEGO model itself is not included with this light kit.

ความต้องการพลังงาน:

  • Three (3) AA batteries (not included) are required for the battery box.
  • Alternatively, a USB charger can be used. Ensure the voltage is less than 5V to prevent damage to the lights.

แนวทางการติดตั้ง:

  1. Refer to the included instruction guide for detailed, step-by-step installation procedures.
  2. Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components to prevent damage.
  3. The installation process may involve disassembling parts of your LEGO model to properly route and secure the light wires.
  4. Plan the placement of wires to ensure they are discreet and do not interfere with the model's structure or appearance.
Diagram showing steps for installing the LED light kit into a LEGO model.
รูปที่ 2: อดีตample installation steps. This diagram illustrates how to integrate the LED light components into the LEGO building set, showing careful placement of wires and lights.
Video 1: Demonstration of the LIGHTAILING LED Light Kit installed on the LEGO Creator Expert The Assembly Square. This video showcases the illuminated model from various angles, highlighting the effect of the installed lights.

3. คู่มือการใช้งาน

Once the LIGHTAILING LED Light Kit is fully installed and connected to a power source (either AA batteries in the battery box or a USB charger), the lights will illuminate your LEGO model.

  • การเปิดเครื่อง: Ensure batteries are correctly inserted into the battery box or the USB connector is plugged into a compatible 5V USB power source.
  • วิธีปิดเครื่อง: Disconnect the USB connector from the power source or remove the batteries from the battery box.

There are no additional controls for brightness or light patterns; the lights operate in a steady-on mode when powered.

4. การบำรุงรักษา

Proper maintenance ensures the longevity and optimal performance of your LIGHTAILING LED Light Kit.

  • การทำความสะอาด: Gently dust the LED lights and wires with a soft, dry cloth. Avoid using liquid cleaners directly on the electrical components.
  • การจัดการสายไฟ: Periodically check that all wires are securely in place and not pinched or strained. Re-route any loose wires to prevent damage.
  • การเปลี่ยนแบตเตอรี่: If using batteries, replace all three AA batteries simultaneously when lights begin to dim or cease to function. Do not mix old and new batteries.
  • พื้นที่จัดเก็บ: If storing the LEGO model with the light kit installed, ensure it is kept in a dry, dust-free environment away from direct sunlight and extreme temperatures.

5 การแก้ไขปัญหา

If you encounter issues with your LIGHTAILING LED Light Kit, refer to the following troubleshooting steps:

  • ไฟไม่ส่องสว่าง:
    • Verify that the power source (batteries or USB charger) is correctly connected and functional.
    • If using batteries, ensure they are new and inserted with the correct polarity.
    • Check all connections between the light strings and the USB connector/battery box for secure fit.
    • Inspect wires for any visible damage, such as cuts or pinches.
  • แสงไฟสลัวลง:
    • If using batteries, they may be low and require replacement.
    • If using a USB charger, ensure it provides sufficient power and is functioning correctly.
  • ไฟแต่ละดวงไม่ทำงาน:
    • Carefully check the connection of the specific light or light string.
    • Inspect the individual LED for physical damage.

If these steps do not resolve the issue, please contact LIGHTAILING customer support for further assistance.

6. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ยี่ห้อแสงสว่าง
หมายเลขรุ่น10255
ขนาดสินค้า7.68 x 5.71 x 1.77 นิ้ว (บรรจุภัณฑ์)
น้ำหนักสินค้า7.1 ออนซ์
แหล่งพลังงาน3 AA batteries (not included) or USB charger (<5V)
อายุที่แนะนำโดยผู้ผลิต6 ปีขึ้นไป
ความเข้ากันได้LEGO Creator Expert The Assembly Square (Model 10255)

7. การรับประกันและการสนับสนุน

LIGHTAILING is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, if you encounter any issues or have questions regarding your LED Light Kit, please contact LIGHTAILING customer service.

For support, refer to the contact information provided in your product packaging or visit the official LIGHTAILING webเว็บไซต์.

เอกสารที่เกี่ยวข้อง - 10255

พรีview LIGHTAILING LED Lighting Kit Installation Guide for LEGO Creator Expert Corner Garage (10264)
Step-by-step instructions for installing the LIGHTAILING LED lighting kit on the LEGO Creator Expert Corner Garage set 10264. Includes warnings, assembly guidance, and contact information.
พรีview LIGHTAILING Cozy House 31139 Lighting Kit Installation Guide | LGK569
Step-by-step instructions for installing the LIGHTAILING LED lighting kit for the LEGO Creator 3-in-1 Cozy House 31139 (Item No. LGK569). Enhance your building block model with this easy-to-follow guide.
พรีview Lightailing LED Lighting Kit Instructions for LEGO NASA Apollo Saturn V 21309
Detailed instructions for installing the Lightailing LED lighting kit (BX118) for the LEGO Creator Expert NASA Apollo Saturn V 21309 set. This guide provides step-by-step assembly for enhancing the model with lights.
พรีview ชุดไฟ LED Lightailing สำหรับ LEGO Assembly Square 10255 คู่มือการติดตั้ง
คำแนะนำโดยละเอียดสำหรับการติดตั้งชุดไฟ LED Lightailing สำหรับชุด LEGO Creator Expert Assembly Square (10255) เรียนรู้วิธีการส่องสว่างโมเดลของคุณด้วยคำแนะนำทีละขั้นตอน
พรีview Lightailing LED Lighting Kit for LEGO Creator Expert NASA Apollo 11 Lunar Lander 10266 - Installation Guide
Detailed instructions for installing the Lightailing LED lighting kit (LGK211) for the LEGO Creator Expert NASA Apollo 11 Lunar Lander (10266) set. Enhance your model with custom lighting.
พรีview Lightailing LED Lighting Kit for LEGO Parisian Restaurant 10243
Installation guide for the Lightailing LED lighting kit for the LEGO Creator Expert Parisian Restaurant (10243) set. Enhance your LEGO model with custom lighting.