การแนะนำ
This manual provides essential information for the safe and effective use, installation, and maintenance of your Oregon 91-591 Mower Blades. These blades are designed as a replacement for Jacobsen Part # 4137186, suitable for 90-inch cut systems. Please read all instructions carefully before proceeding with installation or operation.
การติดตั้งและการตั้งค่า
Safety First: Always disconnect the spark plug wire or remove the battery before performing any maintenance or installation on your mower to prevent accidental starting.
- เตรียมเครื่องตัดหญ้า: Park the mower on a flat, stable surface. Engage the parking brake. Ensure the engine is off and cool. Disconnect the spark plug wire or remove the battery.
- ใบมีดสำหรับเข้าถึง: Carefully tilt the mower onto its side, ensuring the carburetor and air filter are facing upwards to prevent fuel or oil leaks. Alternatively, raise the mower using a suitable lift or jack, ensuring it is securely supported.
- ถอดใบมีดเก่าออก: Wear heavy-duty gloves for protection. Use a wrench or socket to loosen the blade retaining nut. You may need a block of wood to prevent the blade from turning while loosening the nut. Remove the old blade and retaining hardware. Note the orientation of the old blade for correct installation of the new blade.
- ตรวจสอบส่วนประกอบ: Examine the blade spindle, washers, and bolts for wear or damage. Replace any worn or damaged parts before installing new blades.
- ติดตั้งใบมีดใหม่: Position the new Oregon 91-591 blade onto the spindle, ensuring the cutting edge faces the correct direction (typically upwards towards the mower deck). The blade's lift should be oriented to create airflow for proper grass discharge. Secure the blade with the retaining nut and washers.
- ขันสกรูให้แน่น: Tighten the blade retaining nut to the manufacturer's specified torque. Refer to your mower's owner's manual for exact torque specifications. Overtightening or undertightening can be dangerous.
- ทำซ้ำขั้นตอนเดียวกันสำหรับใบมีดทั้งหมด: If replacing multiple blades (this product comes in a 3-pack), repeat the process for each blade.
- การตรวจสอบขั้นสุดท้าย: Once all blades are installed, lower the mower, reconnect the spark plug wire or battery, and perform a visual inspection to ensure all components are secure.
An image of the Oregon 91-591 mower blade, showing its shape and center hole. This illustrates the typical appearance of the blade for installation reference.
คำแนะนำการใช้งาน
After installing new blades, follow these general operating guidelines for safe and effective mowing:
- Pre-Mow Inspection: Before each use, inspect the blades for any signs of damage, bending, or looseness. Ensure all nuts and bolts are tight.
- เศษซากที่ชัดเจน: Always clear the mowing area of any rocks, sticks, wires, or other debris that could be struck by the blades.
- ความสูงในการตัดหญ้าที่เหมาะสม: Adjust your mower's cutting height according to grass type and conditions. Avoid cutting more than one-third of the grass blade length at a time for optimal lawn health.
- การทำงานที่ปลอดภัย: Operate the mower at a safe speed. Never operate the mower without the discharge chute or grass catcher in place. Keep hands and feet away from rotating blades.
- ความสมดุลของใบมีด: If you notice excessive vibration during operation, stop the mower immediately and check the blades for balance. An unbalanced blade can cause damage to the mower and produce an uneven cut.
การซ่อมบำรุง
Regular maintenance of your mower blades ensures optimal cutting performance and extends their lifespan.
- การทำความสะอาด: After each use, clean grass clippings and debris from the blades and underside of the mower deck. Built-up grass can reduce cutting efficiency and promote rust.
- การลับคม: Sharpen blades regularly, typically after every 8-10 hours of use, or more frequently if you notice a ragged cut or dull edges. Use a blade sharpener or file, maintaining the original cutting angle.
- การสร้างสมดุล: After sharpening, always check the blade for balance. An unbalanced blade can cause excessive vibration, leading to premature wear on mower components and an uneven cut. Use a blade balancer tool to ensure proper balance.
- การตรวจสอบความเสียหาย: Periodically inspect blades for cracks, bends, or excessive wear. If a blade is severely damaged, bent, or has cracks, it must be replaced immediately. Do not attempt to repair damaged blades.
- พื้นที่จัดเก็บ: หากจะเก็บเครื่องตัดหญ้าไว้เป็นเวลานาน ควรทำความสะอาดและทาน้ำมันหล่อลื่นบางๆ ที่ใบมีดเพื่อป้องกันสนิม
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| การตัดที่ไม่เรียบหรือขรุขระ | Dull blades, bent blades, unbalanced blades, incorrect cutting height. | Sharpen or replace blades. Check for bends and balance. Adjust cutting height. |
| การสั่นสะเทือนของเครื่องตัดหญ้ามากเกินไป | Unbalanced blades, bent blades, loose blade retaining nut. | Balance or replace blades. Check for bends. Tighten blade retaining nut to specifications. |
| Poor grass discharge/clogging | Dull blades, excessive grass buildup under deck, mowing wet grass. | Sharpen blades. Clean under deck. Avoid mowing wet grass. |
| Blades not spinning freely | Obstruction, seized spindle, incorrect installation. | Remove obstruction. Inspect spindle for damage. Reinstall blades correctly. |
ข้อมูลจำเพาะ
These specifications apply to the Oregon 91-591 Mower Blade (3-pack) designed to fit Jacobsen Part # 4137186 for 90-inch cut systems.
- Oregon Part Number: 91-591
- Replaces Jacobsen Part Number: 4137186
- ปริมาณ: 3 ใบมีดต่อแพ็ค
- Cut System Compatibility: ตัด 90 นิ้ว
- ความยาว: 22-5/16 นิ้ว (56.67 ซม.)
- เส้นผ่านศูนย์กลางรูตรงกลาง: 1/2 นิ้ว (1.27 ซม.)
- ความกว้าง: 2.50 นิ้ว (6.35 ซม.)
- ความหนา: 0.250 นิ้ว (0.635 ซม.)
- ยก: 1-1/8 นิ้ว (2.86 ซม.)
- ออฟเซ็ต: 1/8 นิ้ว (0.32 ซม.)
การรับประกันและการสนับสนุน
For specific warranty information regarding your Oregon 91-591 Mower Blades, please refer to the documentation included with your purchase or visit the official Oregon website. If you require technical assistance or have questions not covered in this manual, please contact Oregon customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
