Okin 2 Button 5 Pin Recliner Hand Control with USB - Instruction Manual

การแนะนำ

This manual provides instructions for the installation, operation, and maintenance of your Okin 2 Button 5 Pin Lift Chair or Power Recliner Hand Control with USB.

This control unit is designed for use with compatible lift chairs and power recliners, offering convenient control over reclining functions and a built-in USB charging port.

คุณสมบัติผลิตภัณฑ์

• วัสดุ: Zinc alloy pane for durability.
• การชาร์จ USB: 5V 2A output for mobile devices.
• ความยาวสายเคเบิล: Approximately 125cm (4.1Ft) recliner switch cable.
• ความเข้ากันได้: Works with Okin, Ashley Furniture, Dewert, Flexteel, Limoss, and many other power recliners using a 5-pin connection.

Okin 2 Button 5 Pin Recliner Hand Control with USB, showing the two control buttons and the USB charging port.

การติดตั้งและการตั้งค่า

This section details the steps for replacing or installing the hand control unit.

เครื่องมือที่จำเป็น: Small flat-head screwdriver or putty knife (for prying), zip ties (optional, for cable management).

ขั้นตอนการติดตั้ง:

1. ตัดการเชื่อมต่อไฟฟ้า: Ensure the recliner is unplugged from the electrical outlet before beginning installation.
2. ลบการควบคุมเก่า: Carefully remove the existing hand control unit from its mounting location. This may involve gently prying it out of the armrest or side panel.
3. ถอดสายเคเบิล: Disconnect the 5-pin connector of the old control from the recliner's motor or control box.
4. Connect New Control: Connect the new Okin 2 Button 5 Pin Hand Control's cable to the recliner's control box. Ensure the 5-pin connector is securely seated.
5. สายเคเบิลเส้นทาง: Route the cable neatly and secure it with zip ties if necessary to prevent snagging or damage.
6. ติดตั้งอุปกรณ์: Insert the new hand control unit into the mounting hole. Ensure it clicks into place or is securely fastened using the provided circlips.
7. เชื่อมต่อพลังงานอีกครั้ง: Reconnect the recliner to the electrical outlet.

ระเบิด view diagram illustrating the components of the recliner hand control and its installation into a wooden frame, showing the switch cover, lower cover, circlips, and studs.

Close-up of the 5-pin connector, which connects the hand control to the recliner's motor system.

คำแนะนำการใช้งาน

The Okin 2 Button 5 Pin Hand Control provides simple operation for your power recliner.

ฟังก์ชั่นปรับเอน:

• Extend Footrest / Recline: กดปุ่มค้างไว้ "ขึ้น" button to extend the footrest and recline the chair.
• Retract Footrest / Upright: กดปุ่มค้างไว้ "ลง" button to retract the footrest and return the chair to its upright position.
• บันทึก: Some recliner models may require continuous pressure on the button for the full range of motion.

พอร์ตชาร์จ USB:

• The integrated USB port (5V 2A) is designed for charging mobile devices. Connect your device's USB cable to the port.
• Ensure the recliner is connected to a power source for the USB port to function.

การซ่อมบำรุง

To ensure the longevity and proper function of your hand control unit:

• การทำความสะอาด: Keep the unit clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents, which can damage the surface or internal components.
• การตรวจสอบสายเคเบิล: Ensure cables are not pinched, twisted, or damaged. Regularly inspect the cable for any signs of wear, fraying, or cuts.
• สภาพแวดล้อม : Do not expose the unit to excessive moisture, direct sunlight, or extreme temperatures.

การแก้ไขปัญหา

หน่วยควบคุมไม่ตอบสนอง:

1. ตรวจสอบพลังงาน: Verify that the recliner is properly plugged into a working power outlet.
2. ตรวจสอบการเชื่อมต่อ: Ensure that all cable connections, especially the 5-pin connector to the recliner's motor, are secure and fully inserted.
3. ความเสียหายของสายเคเบิล: Inspect the control cable for any visible damage or cuts. A damaged cable may prevent proper function.
4. Motor/Power Supply: If the issue persists after checking connections and cable, the recliner's motor or power supply unit may need inspection by a qualified technician.

พอร์ต USB ไม่ชาร์จ:

1. Recliner Power: Ensure the recliner is powered on and connected to an electrical outlet. The USB port requires power from the recliner's system.
2. Cable/Device Check: Try a different USB cable or device to rule out issues with the charging cable or the device being charged.
3. Unit Replacement: If the USB port still does not function, the control unit may require replacement.

ข้อมูลจำเพาะ

Detailed dimensions of the Okin 2 Button 5 Pin Recliner Hand Control, showing measurements of 3.27 inches, 1.42 inches, and 3.9 inches.

หลัง view of the control unit, displaying product identification labels including P/N JLDK-17, DC 24V 2A, USB 5V 2A, and manufacturer Okin Refined Electric Technology Co., Ltd.

การรับประกันและการสนับสนุน

For warranty information or technical support regarding this Okin 2 Button 5 Pin Recliner Hand Control, please refer to the documentation provided with your original recliner or contact the manufacturer directly. Specific warranty terms for this replacement part may vary.