1. บทนำ
The KuWFi WiFi 6 AX1800 Outdoor Wireless AP Router (Model AP820) is an 11ax Wi-Fi standard outdoor access point designed to provide high-speed Ethernet data rates and allow more users access. It supports dual-band operation (2.4GHz and 5GHz) with a combined data rate of 1800Mbps. This device is suitable for extending Wi-Fi coverage in various environments, including homes, hotels, camping sites, factories, communities, and streets, thanks to its robust outdoor design and omnidirectional antennas.
2. อะไรอยู่ในกล่อง
- จุดเชื่อมต่อ WiFi กลางแจ้ง
- Antennas (4 high-gain omnidirectional antennas)
- สายเคเบิลเครือข่าย
- แพ็คเกจการติดตั้ง
3. สินค้าหมดview
The AP820 features a robust, weatherproof housing designed for outdoor use. It includes multiple ports and indicators for easy setup and monitoring.
3.1 ส่วนประกอบของอุปกรณ์
- หน่วยหลัก: The core device with internal components for Wi-Fi broadcasting and network management.
- เสาอากาศ: Four high-gain omnidirectional antennas (two for 2.4GHz and two for 5GHz) for extended coverage.
- PoE Converter: An adapter that supplies power to the device through the Ethernet cable.
- อะแดปเตอร์ไฟฟ้า: For connecting the PoE converter to a power outlet.
3.2 พอร์ตและตัวชี้วัด
- พอร์ต LAN: For local network connections.
- PoE IN/WAN Port: Used for both Power over Ethernet input and Wide Area Network connection.
- ปุ่มรีเซ็ต: Located on the device for factory reset.
- ขั้วต่อเสาอากาศ: Four connectors for attaching the omnidirectional antennas.

ภาพ: ด้านล่าง view of the KuWFi AP820 device, highlighting the LAN port, PoE IN/WAN port, and the Reset button. This view also shows the weather-sealed cap for cable entry.
4. การตั้งค่า
4.1 การติดตั้งเสาอากาศ
- Identify the 2.4GHz and 5GHz antennas. The straight antennas are typically for 5GHz, and those with hinge points are for 2.4GHz.
- Carefully screw each antenna into its corresponding port on the main unit. Ensure the rubber gaskets are properly seated for weatherproofing.

Image: A hand screwing one of the four antennas into the top of the KuWFi AP820 device, showing the secure connection point.
4.2 การเชื่อมต่อพลังงานผ่านอีเทอร์เน็ต (PoE)
- Connect one end of the Ethernet cable to the PoE IN/WAN port on the AP820 unit. Ensure the weather-sealed cap is properly installed around the cable.
- Connect the other end of the Ethernet cable to the PoE port on the PoE converter.
- Plug the power adapter into the PoE converter and then into a power outlet.
4.3 การกำหนดค่าเริ่มต้น (Web อินเตอร์เฟซ)
- Connect your computer directly to the LAN port of the PoE converter using an Ethernet cable.
- เปิด web browser and enter the default IP address (e.g., 192.168.188.253) or the domain name (e.g., wifi.wavlink.com) provided in the quick start guide to access the web อินเทอร์เฟซการจัดการ
- Follow the on-screen instructions to configure the device's operating mode (AP, Gateway, or Repeater), Wi-Fi settings (SSID, password), and other network parameters.
4.4 การติดตั้งอุปกรณ์
The AP820 can be mounted on a wall or pole using the provided installation package. Ensure the device is installed in a location that is not higher than 2-3 meters (6.562 to 9.843 feet) from the ground and not higher than the upstream router or subordinate devices by the same height range.

Image: Step-by-step diagram illustrating the physical installation of the KuWFi AP820 on a pole, including securing the device and routing the Ethernet cable.
4.5 Video Guide: Repeater Mode Setup
Video: A detailed guide demonstrating the setup process for the KuWFi AP820 in Repeater Mode. This video covers physical connections, web interface configuration, and testing the extended Wi-Fi signal.
5. โหมดการทำงาน
KuWFi AP820 รองรับโหมดการทำงานหลายโหมดเพื่อให้เหมาะกับความต้องการด้านเครือข่ายที่หลากหลาย:
- โหมด AP (Access Point): เชื่อมต่อกับเครือข่ายแบบใช้สายและกระจายสัญญาณไร้สาย ทำให้อุปกรณ์ไร้สายสามารถเชื่อมต่อกับเครือข่ายได้
- โหมดเกตเวย์: Functions as a router, providing network address translation (NAT) and managing the local network.
- โหมดทวน: Extends the range of an existing wireless network by receiving and re-transmitting the Wi-Fi signal.

ภาพ: ภาพทางอากาศ view illustrating the KuWFi AP820 in AP/Gateway mode, providing seamless Wi-Fi coverage across a large outdoor area with multiple access points.
6. การบำรุงรักษา
- Regularly check the device for any physical damage or loose connections, especially after severe weather conditions.
- Ensure the weather-sealed caps on the ports are securely fastened to prevent water ingress.
- Keep the device's firmware updated to ensure optimal performance and security. Refer to the manufacturer's webเว็บไซต์นี้ใช้สำหรับดาวน์โหลดเฟิร์มแวร์เวอร์ชั่นล่าสุดและคำแนะนำในการอัปเดต
- Clean the exterior of the device periodically with a soft, dry cloth to remove dust and debris.
7 การแก้ไขปัญหา
- ไม่มีไฟฟ้า: Check the power adapter and PoE converter connections. Ensure the power outlet is functional.
- ไม่มีสัญญาณ Wi-Fi: Verify that the antennas are correctly installed and tightened. Check the device's operating mode and Wi-Fi settings in the web อินเทอร์เฟซ
- ความแรงของสัญญาณไม่ดี: Adjust the device's placement to minimize obstructions. Ensure antennas are oriented correctly. Consider using Repeater Mode if extending coverage over a large area.
- ไม่สามารถเข้าถึง Web อินเทอร์เฟซ: Ensure your computer is directly connected to the PoE converter's LAN port. Verify your computer's IP settings are compatible with the device's default IP range. Try resetting the device to factory defaults using the Reset button.
- การเชื่อมต่อไม่ต่อเนื่อง: Check for interference from other wireless devices or electrical equipment. Ensure the Ethernet cable length does not exceed 60 meters (196 feet) to prevent power loss over PoE.
8. ข้อมูลจำเพาะ
| ยี่ห้อ | คูดับเบิ้ลยูไฟ |
| หมายเลขรุ่น | เคเอฟ-เอพีเอเอ็กซ์820 |
| มาตรฐานการสื่อสารไร้สาย | 802.11ax, 802.11ac, 802.11n, 802.11g, 802.11b |
| อัตราการถ่ายโอนข้อมูล | 1.8 กิกะบิตต่อวินาที (1800Mbps) |
| ระดับย่านความถี่ | สองย่านความถี่ (2.4GHz และ 5GHz) |
| คุณสมบัติพิเศษ | Access Point Mode, Gateway Mode, Repeater Mode |
| ระดับการป้องกันน้ำและฝุ่น (IP) | IP67 Waterproof Housing |
| เสาอากาศ | 4 High Gain Omnidirectional Antennas |
| อุณหภูมิในการทำงาน | -30°C ถึง 70°C (-22°F ถึง 158°F) |
| น้ำหนักสินค้า | 8.8 ปอนด์ |
| ขนาดแพ็คเกจ | 18 x 13 x 5 นิ้ว |
9. การรับประกันและการสนับสนุน
The KuWFi WiFi 6 AX1800 Outdoor Wireless AP Router (Model AP820) is backed by a 30-day money-back guarantee, a month free replacement, and a 1-year manufacturer warranty. Professional technical support is available.
For setup problems or additional instructions, please download the KuWFi shared file containing operation steps and instructions from: https://drive.google.com/drive/folders/12kkvlLpuiQRLtOU60tNDwwl8XFeRIEPJ?usp=sharing
9.1 Video Guide: Product Overview
วิดีโอ: สั้นๆ สั้นๆview of the KuWFi AP820 wireless AP router, showcasing คุณสมบัติและส่วนประกอบต่างๆ





