คู่มือผู้ใช้หัววัด True 970103 Lae Sn4B40P3-Y T3 4.0M

การแนะนำ

This manual provides essential information for the proper installation, operation, and maintenance of your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe. This product is a specialized component designed for food service supply applications, originating from Italy. It is supplied as a single unit with specific package dimensions of 4.0" (L) x 6.0" (W) x 9.0" (H).

ข้อมูลด้านความปลอดภัย

Please read and understand all safety instructions before using the probe. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Always ensure the power to the equipment is disconnected before installing or removing the probe.
• Handle the probe with care to avoid bending or damaging the cable or sensor tip.
• Do not expose the probe to temperatures or environments outside its specified operating range.
• Keep the probe away from water or other liquids unless specifically designed for immersion.
• Only use the probe for its intended purpose as a temperature sensing device in compatible systems.

สินค้าเกินview

The True 970103 Lae Sn4B40P3-Y T3 4.0M Probe is a critical component for accurate temperature measurement in various food service applications. It consists of a long, coiled yellow cable connected to a grey sensor tip.

Image: The True 970103 probe, showing its coiled yellow cable and the grey sensor tip. The cable is neatly bundled, indicating its length and flexibility for various installations.

มีอะไรอยู่ในกล่อง

• 1 x True 970103 Lae Sn4B40P3-Y T3 4.0M Probe (Replacement Part)

การตั้งค่า

The True 970103 probe is designed for integration into existing food service equipment. Follow these general steps for setup:

1. การตระเตรียม: Ensure the equipment where the probe will be installed is turned off and disconnected from its power source.
2. ที่ตั้ง: Identify the designated port or area for the temperature probe within your system. Refer to your equipment's specific manual for precise installation points.
3. การเชื่อมต่อ: Carefully insert the probe's connector into the corresponding receptacle. Ensure a secure and firm connection to prevent signal loss or inaccurate readings.
4. การกำหนดเส้นทาง: Route the probe cable in a manner that avoids kinks, sharp bends, or exposure to excessive heat or moving parts. Secure the cable if necessary to prevent accidental dislodgement.
5. การตรวจสอบ: Once installed, reconnect power to your equipment and perform a system check to confirm the probe is recognized and providing readings.

คำแนะนำการใช้งาน

Once properly installed, the True 970103 probe operates by continuously monitoring temperature within its environment. Its operation is typically passive, providing data to a connected control system or display unit.

• การตรวจสอบอย่างต่อเนื่อง: The probe will automatically transmit temperature data to the connected system.
• การตีความข้อมูล: Refer to your equipment's display or control interface to read the temperature values provided by the probe.
• การรวมระบบ: The probe is designed to work seamlessly with compatible True brand or other food service equipment that utilizes this specific probe type.

การบำรุงรักษาและการดูแล

Proper maintenance ensures the longevity and accuracy of your True 970103 probe.

• การทำความสะอาด: If the probe tip or cable becomes soiled, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, especially near the connector.
• การตรวจสอบ: Periodically inspect the probe cable for any signs of wear, cuts, or damage. Check the sensor tip for any physical deformities.
• พื้นที่จัดเก็บ: If the probe is removed from service, coil the cable loosely and store it in a clean, dry place away from extreme temperatures and direct sunlight.
• หลีกเลี่ยงความเครียด: Do not pull on the cable to disconnect the probe. Always grasp the connector firmly.

การแก้ไขปัญหา

If you experience issues with your True 970103 probe, consider the following common problems and solutions:

If the problem persists after attempting these solutions, please contact True customer support or a qualified technician.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For warranty information or technical support regarding your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe, please refer to the documentation provided with your original equipment or contact True customer service directly. Keep your purchase receipt and model number handy for faster service.

ข้อมูลติดต่อ: Please visit the official True Manufacturing website for the most current contact details for customer support and service centers.