อาวาย่า 700512402

Avaya J100 Wireless Module (700512402) User Manual

For Avaya J129, J179, and K155 IP Phones

1. บทนำ

The Avaya J100 Wireless Module (model 700512402) is an optional hardware accessory designed to enhance the connectivity of compatible Avaya J129, J179, and K155 IP Phones. This module provides seamless Wi-Fi and Bluetooth capabilities, allowing for greater flexibility in phone placement and headset usage.

This manual provides essential information for the proper installation, operation, and maintenance of your J100 Wireless Module. Please read these instructions carefully before proceeding with installation or use.

Avaya J100 Wireless Module

Image 1: Avaya J100 Wireless Module. This image displays the compact design of the module, showing its connectors and casing.

2. ข้อมูลด้านความปลอดภัย

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าแพ็คเกจของคุณมีรายการต่อไปนี้:

If any items are missing or damaged, please contact your vendor or Avaya support.

4. การตั้งค่าและการติดตั้ง

Follow these steps to install the Avaya J100 Wireless Module into your compatible Avaya IP Phone:

  1. ปิดโทรศัพท์: Disconnect the power cable from your Avaya J129, J179, or K155 IP Phone.
  2. ค้นหาช่องเสียบโมดูล: Identify the designated slot for the wireless module on the back or side of your IP Phone. This slot is typically covered by a removable panel.
  3. ถอดฝาครอบออก: Carefully remove the cover panel from the module slot. This may involve gently prying it off or unscrewing a small screw, depending on your phone model.
  4. แทรกโมดูล: Align the Avaya J100 Wireless Module with the slot and gently insert it until it is fully seated. Ensure the connectors are properly aligned to avoid damage.
  5. Secure Module (if applicable): If your phone model requires it, secure the module with any screws that were removed from the cover panel.
  6. เปลี่ยนฝาครอบ: Reattach the cover panel to the module slot.
  7. เปิดโทรศัพท์: Reconnect the power cable to your IP Phone. The phone will power on and automatically detect the newly installed J100 Wireless Module.

Once the phone powers on, it should recognize the module, and you will be able to configure Wi-Fi and Bluetooth settings through the phone's menu.

5. คู่มือการใช้งาน

5.1. การเชื่อมต่อ Wi-Fi

To connect your Avaya IP Phone to a Wi-Fi network:

  1. Access the phone's menu and navigate to the "Settings" or "Network" options.
  2. Select "Wi-Fi" or "Wireless Settings."
  3. Enable Wi-Fi if it is not already active.
  4. The phone will scan for available Wi-Fi networks. Select your desired network from the list.
  5. Enter the Wi-Fi password (if required) using the phone's keypad.
  6. Confirm the connection. The phone should now be connected to the Wi-Fi network.

5.2. การเชื่อมต่อบลูทูธ

To pair a Bluetooth headset or other device with your Avaya IP Phone:

  1. Ensure your Bluetooth device is in pairing mode (refer to your device's manual for instructions).
  2. On your Avaya IP Phone, navigate to the "Settings" or "Bluetooth" menu.
  3. Enable Bluetooth if it is not already active.
  4. The phone will scan for nearby Bluetooth devices. Select your device from the list.
  5. If prompted, enter the pairing code (usually "0000" or "1234" for headsets, or as specified by your device).
  6. Confirm the pairing. Once paired, your Bluetooth device should be ready for use with the phone.

บันทึก: Some Bluetooth headsets may enter a power-saving mode when not in use, which could lead to a slight delay in call alerts. This is normal behavior for certain devices.

6. การบำรุงรักษา

7 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Module not detected by phone.Module not properly seated; phone not restarted after installation.Ensure the module is fully inserted into its slot. Power cycle the IP Phone.
ไม่สามารถเชื่อมต่อกับเครือข่าย Wi-Fi ได้Incorrect password; network out of range; Wi-Fi disabled.Verify the Wi-Fi password. Move the phone closer to the access point. Ensure Wi-Fi is enabled in phone settings.
อุปกรณ์บลูทูธไม่จับคู่Device not in pairing mode; Bluetooth disabled on phone; device out of range.Put the Bluetooth device into pairing mode. Ensure Bluetooth is enabled on the phone. Move devices closer.
Intermittent Bluetooth connection or missed call alerts.Bluetooth device power-saving mode; environmental interference.This can be normal for some Bluetooth devices. Ensure the headset is fully charged. Minimize interference from other wireless devices.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information, please refer to the documentation provided with your original Avaya IP Phone or contact your authorized Avaya reseller. Avaya provides technical support for its products. For assistance, visit the official Avaya support webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา

You can find more information and support resources on the official Avaya webเว็บไซต์: www.avaya.com/support

เอกสารที่เกี่ยวข้อง - 700512402

พรีview การติดตั้งและการจัดการโทรศัพท์ IP SIP รุ่น Avaya J100 ใน Avaya Aura®
คู่มือฉบับสมบูรณ์สำหรับการติดตั้งและบริหารจัดการโทรศัพท์ IP SIP ซีรีส์ Avaya J100 ภายในระบบนิเวศ Avaya Aura® ครอบคลุมการตั้งค่า การกำหนดค่า และการจัดการ
พรีview โทรศัพท์ IP SIP รุ่น Avaya J100: มากกว่าview และข้อมูลจำเพาะ
ครอบคลุมทั่วview และข้อมูลจำเพาะทางเทคนิคสำหรับโทรศัพท์ IP SIP ซีรีส์ Avaya J100 ซึ่งครอบคลุมคุณสมบัติ ฮาร์ดแวร์ ประสิทธิภาพ ข้อกำหนดด้านสภาพแวดล้อม โปรโตคอลความปลอดภัย และแหล่งข้อมูลที่เกี่ยวข้อง
พรีview คู่มือการใช้งานโมดูลเสริม Avaya J100
คู่มือฉบับสมบูรณ์สำหรับการใช้งานโมดูลเสริม Avaya J100 ร่วมกับโทรศัพท์ IP Avaya J169 และ J179 ครอบคลุมถึงการตั้งค่า คุณสมบัติ การปรับแต่ง การแก้ไขปัญหา และแหล่งข้อมูลต่างๆ
พรีview การใช้งานโมดูลขยาย Avaya J100 สำหรับ SIP - คู่มือผลิตภัณฑ์ Avaya
คู่มือฉบับสมบูรณ์สำหรับการใช้งานโมดูลเสริม Avaya J100 สำหรับ SIP ครอบคลุมการติดตั้ง คุณสมบัติ การตั้งค่า และการแก้ไขปัญหา เรียนรู้วิธีเพิ่มประสิทธิภาพประสบการณ์การใช้งานโทรศัพท์ IP ของ Avaya ด้วยโมดูลนี้
พรีview โมดูลขยาย Avaya J100 สำหรับ SIP: คู่มือผู้ใช้
คู่มือนี้ให้ข้อมูลที่ครอบคลุมเกี่ยวกับการใช้งานโมดูลขยาย Avaya J100 สำหรับ SIP โดยครอบคลุมรายละเอียดต่างๆ มากมายviewรวมถึงการดำเนินการโทร การปรับแต่งการตั้งค่า การแก้ไขปัญหา และแหล่งข้อมูลสำหรับผู้ใช้โทรศัพท์ IP ของ Avaya
พรีview โทรศัพท์ IP Avaya IX™ J100: คุณสมบัติ รุ่น และความสามารถ
ค้นพบโทรศัพท์ IP ซีรีส์ Avaya IX™ J100 ซึ่งประกอบด้วยรุ่น J129, J139, J159, J169, J179 และ J189 เอกสารฉบับนี้จะสรุปคุณลักษณะ ฟังก์ชันการทำงาน ใบอนุญาต และการผสานรวมกับ Avaya Aura และ IP Office เพื่อการสื่อสารทางธุรกิจที่มีประสิทธิภาพยิ่งขึ้น