1. สินค้าหมดview
The TOTO THU766 Auto-Flush Unit Type B Single Flush 1G is designed to provide automatic flushing capabilities for compatible TOTO WASHLET+ toilets. This unit enhances convenience and hygiene by integrating seamlessly with your existing WASHLET+ system.
2. ข้อมูลด้านความปลอดภัย
- Always turn off the water supply to the toilet before beginning installation or maintenance.
- Ensure the WASHLET+ unit is powered off and unplugged before handling any internal components.
- Handle ceramic toilet tank lids with care as they are heavy and fragile. Place them on a soft, stable surface to prevent breakage.
- If you are unsure about any step, consult a qualified plumber or TOTO customer support.
3. เนื้อหาบรรจุภัณฑ์
- TOTO THU766 Auto-Flush Unit
- Remote Control Flush Cover
- Instruction Card for Remote Control
- Attachment String/Pin for Flapper
- สายไฟ
4. ความเข้ากันได้
This Auto-Flush unit is compatible with specific TOTO WASHLET+ models and toilet components. Please refer to the compatibility chart below to ensure your toilet system is supported.
Image: TOTO WASHLET+ Auto Flush Compatibility Chart. This chart details compatible WASHLET+ collections, toilet components, extension adapters, auto flush units, and complete sets for S550E and S500E elongated WASHLET+ models.
For optimal performance and ease of installation, TOTO recommends ordering your Auto Flush toilet as a complete set if you are purchasing a new system.
Compatibility Chart Details:
| WASHLET+ Collection | Toilet Component | อะแดปเตอร์ขยาย | หน่วยฟลัชอัตโนมัติ | WASHLET+ Auto Flush Complete Set (S550E) | WASHLET+ Auto Flush Complete Set (S500E) | ||
|---|---|---|---|---|---|---|---|
| หนึ่งชิ้น | เอมส์® | CST626CEFGAT40#01 | THU767 | MW6263056CEFGA#01 | MW6263046CEFGA#01 | ||
| AQUIA® IV | CST646CUMFGAT40#01 | THU765 | MW6463056CUMFGA#01 | MW6463046CUMFGA#01 | |||
| CST646CEMFGAT40#01 | THU765 | MW6463056CEMFGA#01 | MW6463046CEMFGA#01 | ||||
| LEGATO® | CST624CEFGAT40#01 | THU767 | MW6243056CEFGA#01 | MW6243046CEFGA#01 | |||
| NEXUS® | CST642CUFGAT40#01 | THU766 | MW6423056CUFGA#01 | MW6423046CUFGA#01 | |||
| CST642CEFGAT40#01 | THU767 | MW6423056CEFGA#01 | MW6423046CEFGA#01 | ||||
| TWO-PIECE | AQUIA IV | CT446CUFGT40#01 | ST446UMA#01 | 9AU321-อ | THU765 | MW4463056CUMFGA#01 | MW4463046CUMFGA#01 |
| CT446CUFGT40#01 | ST446EMA#01 | 9AU321-อ | THU765 | MW4463056CEMFGA#01 | MW4463046CEMFGA#01 | ||
| CT446CUGT40#01 | ST446UMA#01 | 9AU321-อ | THU765 | MW4463056CUMGA#01 | MW4463046CUMGA#01 | ||
| CT446CUGT40#01 | ST446EMA#01 | 9AU321-อ | THU765 | MW4463056CEMGA#01 | MW4463046CEMGA#01 | ||
| CONNELLY® | CT494CEFGT40#01 | ST494MA#01 | 9AU321-อ | THU765 | MW4943054CEMFGA#01 | MW4943044CEMFGA#01 | |
| NEXUS | CT442CUFGT40#01 | ST442UA#01 | 9AU321-อ | THU766 | MW4423056CUFGA#01 | MW4423046CUFGA#01 | |
| CT442CUFGT40#01 | ST442EA#01 | 9AU321-อ | THU767 | MW4423056CEFGA#01 | MW4423046CEFGA#01 |
5. การตั้งค่าและการติดตั้ง
- Power Off WASHLET+: Ensure your WASHLET+ unit is powered off. This can typically be done by holding down the power button on its remote control or by unplugging the unit.
- ปิดแหล่งจ่ายน้ำ: Locate the water supply valve for your toilet, usually on the wall behind or near the toilet, and turn it clockwise until the water flow stops completely.
- ถังชักโครกเปล่า: Flush the toilet to drain the water from the tank. Hold the flush lever down until the tank is as empty as possible.
- Remove Tank Lid: Carefully lift the ceramic tank lid. It is heavy and fragile, so use both hands and place it on a soft, stable surface to prevent damage.
- Install Auto-Flush Unit:
- Position the Auto-Flush unit inside the toilet tank. It should sit on top of the flush valve.
- Angle the unit slightly to ensure it does not interfere with the manual flush lever's operation. The motor should be able to lift the flapper without obstruction.
- เชื่อมต่อโซ่ Flapper: Attach the provided attachment string/pin to the flapper inside the tank and then to the Auto-Flush unit's lever. Ensure there is minimal slack in the chain for proper operation.
- เชื่อมต่อสายไฟ: Run the power cable from the Auto-Flush unit behind the toilet tank. Locate the power input on the back of your WASHLET+ unit and plug the cable in. You may need to remove a small cover from the WASHLET+ unit's power port first.
- Replace Remote Control Flush Cover: If your WASHLET+ remote control has a removable cover for the flush buttons, remove the existing cover by pressing the clips and lifting. Replace it with the new flush cover provided with the Auto-Flush unit. This new cover will have the auto-flush symbol.
- Turn On WASHLET+: Turn on your WASHLET+ unit by holding down the power button on the remote control for a few seconds.
- Test Flush (Water Off): Before turning the water back on, test the auto-flush function using the remote control to ensure the unit correctly lifts the flapper.
- เปิดน้ำประปา: Turn the water supply valve counter-clockwise to restore water flow to the toilet tank. Allow the tank to fill completely.
- Final Test Flush (Water On): Test the auto-flush function again with water in the tank to confirm proper operation.
- Replace Tank Lid: Carefully place the toilet tank lid back onto the tank.
6. คู่มือการใช้งาน
Once installed, the TOTO THU766 Auto-Flush Unit allows for automatic flushing of your compatible WASHLET+ toilet. The auto-flush function is typically activated via the WASHLET+ remote control.
- ระบบชักโครกอัตโนมัติ: The WASHLET+ unit, when equipped with the Auto-Flush, will automatically flush after use. Refer to your WASHLET+ manual for specific settings and customization options for automatic flushing.
- การกดชักโครกด้วยตนเอง: The traditional manual flush lever on your toilet tank remains functional. Ensure the Auto-Flush unit is positioned so it does not obstruct the manual lever's movement.
- ระบบชักโครกควบคุมระยะไกล: Use the dedicated flush button on your WASHLET+ remote control to manually activate a flush.
7. การบำรุงรักษา
- การทำความสะอาด: Clean the exterior of the Auto-Flush unit with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the plastic components.
- การตรวจสอบปกติ: Periodically check the flapper chain and the Auto-Flush unit's lever for any signs of wear or obstruction. Ensure the chain has proper tension.
- คุณภาพน้ำ: Hard water can lead to mineral buildup. If you notice reduced performance, consider cleaning the internal components or consulting a professional.
8 การแก้ไขปัญหา
- Auto-Flush Not Working:
- Check if the WASHLET+ unit is powered on and properly connected to the Auto-Flush unit.
- Ensure the remote control has fresh batteries and is functioning correctly.
- Verify that the flapper chain is correctly attached and not tangled or too loose/tight.
- Toilet Not Flushing Completely:
- Check the water level in the tank. It should be at the recommended fill line.
- Inspect the flapper for proper sealing and ensure it opens fully when the Auto-Flush unit activates.
- Manual Flush Lever Obstructed:
- Adjust the position of the Auto-Flush unit inside the tank to ensure it does not impede the manual flush lever.
9. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | THU766 |
| ยี่ห้อ | โตโต้ |
| คำอธิบาย | AUTO-FLUSH UNIT TYPE B SINGLE FLUSH 1G |
| ยูพีซี | 739268360365 |
| น้ำหนักสินค้า | 11.2 ออนซ์ (0.7 ปอนด์) |
| ขนาดสินค้า | 9 x 6.5 x 5.75 นิ้ว |
| วัสดุ | Plastic (Unit) |
| สี | Unfinish |
| ประเภทการติดตั้ง | Internal Tank Mount |
| จำเป็นต้องใช้แบตเตอรี่หรือไม่? | No (Powered by WASHLET+) |
| รายการ จำนวนแพ็คเกจ | 1 |
10. การรับประกันและการสนับสนุน
For warranty information and technical support, please refer to the official TOTO website or contact TOTO customer service directly. You may also find support by calling 1-888-648-6466 for flapper-related inquiries (referencing #61715011-CE01).
โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีเรียกร้องการรับประกัน





