ยางอะไหล่ล้อหลัง Alpine HCE-RCAM-WRA View คู่มือการใช้งานระบบกล้อง

1. สินค้าหมดview

The Alpine HCE-RCAM-WRA is a rear-view camera system specifically designed for 2007-2018 Jeep Wrangler JK models. This system enhances rear visibility, aiding in parking and maneuvering. It features High Dynamic Range (HDR) technology for improved image quality across various lighting conditions, preventing washed-out or overly dark images. The camera is mounted on a versatile bracket that positions between the spare tire and the vehicle's 5x5 wheel pattern, ensuring a clear line of sight.

คุณสมบัติที่สำคัญ ได้แก่:

• Easy, Add-On Camera System
• Versatile Installation with adjustable bracket
• High Dynamic Range (HDR) Technology for superior image quality

2. อะไรอยู่ในกล่อง

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:

• Camera Bracket with HCE-C1100 pre-assembled
• Camera Extension Cable (7M/23FT)
• ตัวยึดยางอะไหล่
• เคเบิ้ลไทร์ x5
• Waterproofing Pad x1
• Power & Video Unit
• Retaining Clips x3
• Waterproofing Pad Adhesive x1
• คู่มือการติดตั้งอย่างรวดเร็ว x1
• Torx Screw & Lock Washer M6x8
• Torx Screw, Lock Washer, & Nut M6x12 x1
• Nut for M6x12 Screw x1 (Spare only, not used)
• Heat Shrink Tubing x1
• ประแจอัลเลน x1

Figure 2.1: All included components of the HCE-RCAM-WRA system.

3. การตั้งค่าและการติดตั้ง

The HCE-RCAM-WRA system is designed for integration with Alpine in-dash screen systems, factory Jeep screens, or other aftermarket displays. For factory screens, the Alpine SGS-CH01 Camera Interface (sold separately) may be required for active guide lines without factory screen re-programming.

3.1. การติดตั้งกล้อง

The camera and its bracket are designed to mount between the spare tire and the Wrangler’s 5x5 wheel pattern. The upper portion of the bracket can be adjusted to the left or right of the wheel’s spokes to ensure an unobstructed view ด้านหลังรถ

Figure 3.1: The camera mounted on its spare tire bracket.

Figure 3.2: Camera positioned within the spokes of a spare wheel.

3.2. การเชื่อมต่อสายไฟ

The system requires connections for power, ground, and video signal. The power wire for the camera should be connected to the vehicle's reverse light circuit so the camera activates automatically when the vehicle is shifted into reverse. The video signal cable runs from the camera to your compatible in-dash display unit.

รูปที่ 3.3: เกินview of the wiring connections for the camera system.

3.2.1. General Wiring Example (Not specific to Jeep JK or Alpine)

The following video demonstrates a general approach to wiring a backup camera, including tapping into reverse lights and routing cables. While the vehicle and camera shown are different, the principles of connecting power, ground, and video signal remain similar.

3.3. Adjustable Mounting and Features

The camera's bracket allows for versatile positioning to achieve the best viewing angle, accommodating various spare tire and wheel designs. The camera itself is designed to be robust and waterproof.

4. คู่มือการใช้งาน

Once properly installed and connected, the Alpine HCE-RCAM-WRA camera system operates automatically. When the vehicle is shifted into reverse, the camera will activate, and the rear-view image will be displayed on your compatible in-dash screen.

The camera utilizes High Dynamic Range (HDR) technology to provide a clear image even in challenging lighting conditions, such as transitioning from bright sunlight to dark garages or during nighttime operation. This technology helps to balance bright and dark areas for optimal visibility.

รูปที่ 4.1: อดีตample of the rear-view image displayed on a compatible screen.

Figure 4.2: HDR technology improves image clarity in varied lighting conditions.

5. การบำรุงรักษา

To ensure optimal performance and longevity of your Alpine HCE-RCAM-WRA camera system, follow these simple maintenance guidelines:

• ทำความสะอาดเลนส์กล้อง: Regularly inspect and gently clean the camera lens using a soft, damp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือวัสดุที่อาจทำให้เลนส์เป็นรอยได้
• ตรวจสอบการเชื่อมต่อ: Periodically inspect all wiring connections, especially those exposed to the elements, to ensure they are secure and free from corrosion.
• ตรวจสอบการติดตั้ง: Verify that the camera bracket and mounting hardware remain securely fastened to the spare tire. Tighten any loose screws as needed.
• หลีกเลี่ยงการล้างด้วยแรงดันสูง: While the camera is designed to be durable, avoid directing high-pressure water jets directly at the camera or its connections during vehicle washing.

6 การแก้ไขปัญหา

If you encounter issues with your Alpine HCE-RCAM-WRA camera system, refer to the following common problems and solutions:

• ไม่มีภาพที่แสดง:
  • Ensure the vehicle is in reverse.
  • Check all power and video connections for proper seating and integrity.
  • Verify that the reverse light trigger wire is correctly connected and receiving power when in reverse.
  • Confirm your in-dash display is set to the correct camera input.
• Poor Image Quality (Blurry, Distorted, or Flickering):
  • ทำความสะอาดเลนส์กล้องให้สะอาดทั่วถึง
  • Check video cable connections for any damage or loose contacts.
  • ตรวจสอบให้แน่ใจว่าติดตั้งกล้องอย่างแน่นหนาและไม่สั่น
  • Verify that the power supply to the camera is stable (12 Volts).
• Image Appears Washed Out or Too Dark:
  • The camera's HDR technology is designed to mitigate this, but extreme lighting conditions can still affect image perception.
  • Adjust brightness/contrast settings on your in-dash display, if available.

If these steps do not resolve the issue, contact Alpine customer support or a certified installer.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For warranty information, product registration, or technical assistance, please refer to the official Alpine website or contact Alpine customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.