1. บทนำ
The Donner Dark Mouse Distortion Pedal is an effect unit designed for electric guitar, providing a range of distortion tones. It features two distinct distortion modes and a true bypass design to maintain signal integrity when the effect is disengaged. This manual provides essential information for setting up, operating, and maintaining your pedal.

Figure 1: The Donner Dark Mouse Distortion Pedal, designed to deliver classic distortion sounds.
2. สินค้าหมดview
The Dark Mouse pedal features intuitive controls for shaping your sound. Understanding these controls is key to utilizing the pedal's full potential.

Figure 2: Control layout of the Dark Mouse Distortion Pedal.
การควบคุม:
- 1. DC 9V Jack: Power input for a 9V DC adapter (center negative).
- 2. Mode Switch (CLASSIC/HYPER): Toggles between two distinct distortion characteristics.
- 3. ปุ่มปรับระดับ: ปรับระดับเสียงโดยรวมของเอฟเฟ็กต์
- 4. FILTER Knob: Controls the tone or brightness of the distortion. Turning clockwise increases treble.
- 5. DIST Knob: Adjusts the amount of distortion or gain.
- 6. Input Jack: Connect your guitar or previous effect pedal here.
- 7. Output Jack: เชื่อมต่อกับของคุณ amplifier or next effect pedal.
- 8. ไฟ LED: จะสว่างขึ้นเมื่อเอฟเฟกต์ทำงาน
- 9. สวิตช์เหยียบ: เปิดใช้งานหรือปิดใช้งานผลกระทบ
3. การตั้งค่า
Follow these steps to connect your Donner Dark Mouse Distortion Pedal:
- ให้แน่ใจว่าคุณ ampควรปิดเครื่องขยายเสียงก่อนทำการเชื่อมต่อใดๆ
- เชื่อมต่อกีตาร์ไฟฟ้าของคุณเข้ากับ... แจ็คอินพุต (6) of the pedal using a standard 1/4-inch instrument cable.
- เชื่อมต่อ แจ็คเอาท์พุท (7) of the pedal to your amplifier's input using another standard 1/4-inch instrument cable.
- Connect a 9V DC power adapter (center negative, 500mA minimum) to the แจ็ค DC 9V (1). Note: The power supply is not included. Using an incorrect power supply may damage the pedal.
- Once all connections are secure, you may turn on your ampชีวิต.

Figure 3: Proper connection of the pedal to power and instrument cables.
4. คู่มือการใช้งาน
The Dark Mouse pedal offers two distinct distortion modes and flexible controls to tailor your sound.
การมีส่วนร่วมในผล:
กดปุ่ม วิทซ์เท้า (9) to toggle the effect on or off. The ไฟ LED แสดงสถานะ (8) will illuminate when the effect is active.
Selecting Distortion Modes:
ใช้ สวิตช์โหมด (2) to select between the two distortion modes:
- คลาสสิค: ทำให้เกิดความอบอุ่น วินtage distortion sound with a subtle fuzz characteristic.
- HYPER: Offers a more powerful and aggressive sound with enhanced edges and low-end response.

Figure 4: The mode switch allows selection between Classic and Hyper distortion.
การปรับโทนและเกน:
Utilize the three control knobs to fine-tune your distortion sound:
- LEVEL Knob (3): Adjust this to set the overall output volume of the pedal. Start with it at a moderate level and adjust to match your bypassed signal volume.
- DIST Knob (5): Turn this knob clockwise to increase the amount of distortion, from subtle crunch to heavy saturation.
- FILTER Knob (4): This control acts as a tone shaping filter. Turning it clockwise will increase the brightness and treble content of the distortion, while turning it counter-clockwise will result in a darker tone.

Figure 5: The Level, Dist, and Filter knobs provide flexible control over the effect.
บายพาสทรู:
The pedal features true bypass circuitry. This means that when the effect is disengaged, your guitar signal passes directly through the pedal without any electronic interference, preserving your original tone. The LED indicator will be off when in true bypass mode.

Figure 6: True bypass ensures a clean signal when the effect is off.
5. การบำรุงรักษา
- การทำความสะอาด: ใช้ผ้าแห้งเนื้อนุ่มเช็ดทำความสะอาดด้านนอกของแป้นเหยียบ หลีกเลี่ยงการใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
- พื้นที่จัดเก็บ: เก็บแป้นเหยียบไว้ในที่แห้ง หลีกเลี่ยงอุณหภูมิที่สูงและแสงแดดโดยตรง
- แหล่งจ่ายไฟ: Always use a 9V DC center-negative power adapter with a minimum of 500mA current. Disconnect the power supply when the pedal is not in use for extended periods.
- การดูแลทางกายภาพ: The pedal features a durable aluminum alloy casing. Avoid dropping the pedal or subjecting it to excessive force.
6 การแก้ไขปัญหา
- ไม่มีเสียง:
- ตรวจสอบการเชื่อมต่อสายเคเบิลทั้งหมด (กีตาร์ไปยังอินพุต เอาต์พุตไปยัง amp).
- Ensure the power adapter is correctly connected and providing power.
- ตรวจสอบว่ากีตาร์ของคุณและ ampเครื่องขยายเสียงทำงานได้อย่างถูกต้อง
- If the LED is off, press the footswitch to engage the effect.
- Weak or Distorted Sound (when bypassed):
- This pedal features true bypass, so a weak or distorted bypassed signal usually indicates an issue with cables or other equipment in your signal chain, not the pedal itself.
- เสียงรบกวน/เสียงฮัมที่ไม่ต้องการ:
- Ensure you are using a regulated 9V DC center-negative power supply. Unregulated power supplies can introduce noise.
- ตรวจสอบสายเคเบิลว่าชำรุดหรือไม่
- Move the pedal away from power transformers or other electronic devices that may cause interference.
7. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| หมายเลขรุ่น | EC1178-FBA-US |
| น้ำหนักสินค้า | 8.8 ออนซ์ (0.25 กิโลกรัม) |
| ขนาดสินค้า | 3.7 x 1.69 x 2.01 นิ้ว (ยาว 3.7 นิ้ว x กว้าง 1.7 นิ้ว x สูง 2 นิ้ว) |
| วัสดุตัวเครื่อง | โลหะผสมอลูมิเนียม |
| แหล่งพลังงาน | อแดปเตอร์,ไฟฟ้า |
| เล่มที่tage | 9 Volts DC (Center Negative) |
| ประเภทขั้วต่อ | 1/4" (6.35mm) mono jack |
| รูปแบบสัญญาณ | อนาล็อก |
8. อะไรอยู่ในกล่อง
- 1 x Donner Dark Mouse pedal
9. การรับประกันและการสนับสนุน
สำหรับข้อมูลการรับประกันหรือการสนับสนุนทางเทคนิค โปรดดูที่เว็บไซต์อย่างเป็นทางการของ Donner website or contact Donner customer service directly. Keep your purchase receipt for warranty claims.





