การแนะนำ
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sommer Pearl 4018 wireless garage door transmitters. These transmitters are designed for reliable and secure control of compatible garage door openers, utilizing the SOMloq2 radio system and offering retro-compatibility with the Somloq Rollingcode system.
โปรดอ่านคู่มือนี้อย่างละเอียดก่อนใช้งานผลิตภัณฑ์ เพื่อให้มั่นใจได้ว่าผลิตภัณฑ์ทำงานได้อย่างถูกต้องและมีอายุการใช้งานยาวนาน
การตั้งค่า
The Sommer Pearl 4018 transmitters come pre-equipped with a 3V CR2032 battery. Before initial use, ensure the battery is properly seated and any protective tabs are removed.
This image displays three Sommer Pearl 4018 wireless garage door transmitters. Each transmitter is black with four rectangular buttons outlined in red, and the 'SOMMER' logo is visible on the right side. These compact devices are designed for remote operation of garage doors.
Pairing with Your Garage Door Opener
- Locate the programming button on your garage door opener's receiver unit. Refer to your opener's specific manual for its exact location.
- Press and hold the programming button on the receiver until the indicator light illuminates or flashes, indicating it is in pairing mode.
- Within a few seconds, press and hold the desired button on your Sommer Pearl 4018 transmitter that you wish to program.
- Release the button on the transmitter once the receiver's indicator light changes (e.g., turns solid, stops flashing, or makes a sound), confirming successful pairing.
- Test the programmed button to ensure it operates the garage door correctly.
For existing Somloq Rollingcode systems, the Pearl 4018 is retro-compatible, allowing seamless integration with your current setup.
การดำเนินงาน
The Sommer Pearl 4018 transmitter features four distinct buttons for controlling various functions of your garage door opener or other compatible devices.
การทำงานพื้นฐาน
- เปิด/ปิด: Press the programmed button once to activate the garage door opener. Pressing it again will typically stop or reverse the door's movement, depending on your opener's configuration.
- ฟังก์ชั่นหลากหลาย: If multiple buttons are programmed for different functions (e.g., opening different doors, controlling lights), press the corresponding button for the desired action.
The transmitter operates with a radio frequency of FM 868.8 MHz and FM 868.95 MHz, providing a reliable signal. The typical operating range is approximately 50 meters, though this can vary based on environmental factors such as obstacles and interference. The signal is designed to be interference-resistant, ensuring consistent performance.
การซ่อมบำรุง
Regular maintenance ensures the optimal performance and longevity of your Sommer Pearl 4018 transmitters.
การเปลี่ยนแบตเตอรี่
The transmitter uses a 3V CR2032 lithium metallic battery. When the signal range decreases significantly or the indicator light on the transmitter fails to illuminate upon button press, it is likely time to replace the battery.
- เปิดตัวส่งสัญญาณอย่างระมัดระวังasing. Refer to the product's design for the specific opening mechanism (e.g., small screw, snap-fit).
- ถอดแบตเตอรี่ CR2032 เก่าออก
- Insert a new 3V CR2032 battery, ensuring the correct polarity (+ side up).
- Securely close the transmitter casing.
การทำความสะอาดและการเก็บรักษา
- Clean the exterior of the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Store the transmitter in a dry environment, away from extreme temperatures and direct sunlight.
- The transmitter is designed with a durable stainless steel finish, offering resistance to minor impacts.
การแก้ไขปัญหา
If you experience issues with your Sommer Pearl 4018 transmitter, consider the following common solutions:
- Transmitter Not Responding:
- ตรวจสอบแบตเตอรี่ เปลี่ยนแบตเตอรี่หากแบตเตอรี่อ่อนหรือหมด
- Ensure you are within the operating range of the garage door opener.
- Verify that the transmitter is properly paired with the opener. If not, repeat the pairing process outlined in the Setup section.
- ลดระยะ:
- เปลี่ยนแบตเตอรี่
- Check for sources of radio interference in the vicinity (e.g., other wireless devices, large metal objects).
- Ensure there are no physical obstructions between the transmitter and the receiver.
- การทำงานเป็นระยะ:
- Confirm the battery connection is secure.
- Re-pair the transmitter with the garage door opener.
If problems persist after attempting these solutions, please contact customer support or a qualified technician.
ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| หมายเลขรุ่น | CFL (4018V000) |
| ขนาด (กว้าง x ยาว x สูง) | 79 x 26 x 13 มม. |
| น้ำหนัก | 130 กรัม |
| ความถี่วิทยุ | FM 868.8 MHz, FM 868.95 MHz |
| ระบบวิทยุ | SOMloq2 (Retro-compatible with Somloq Rollingcode) |
| จำนวนปุ่ม | 4 |
| ประเภทแบตเตอรี่ | 3V CR2032 (รวมอยู่ด้วย) |
| ระยะการทำงาน | Approx. 50 meters (environment dependent) |
| วัสดุตกแต่ง | สแตนเลส |
ข้อมูลการรับประกัน
Specific warranty details for the Sommer Pearl 4018 transmitters are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact the authorized seller or manufacturer directly.
สนับสนุน
For technical assistance, troubleshooting beyond the scope of this manual, or inquiries about your Sommer Pearl 4018 transmitters, please contact:
- Your Seller: DOMO-MATIC (as listed on the product page)
- ผู้ผลิต: Sommer (refer to their official webเว็บไซต์สำหรับรายละเอียดการติดต่อ)
When contacting support, please have your product model number (CFL) and any relevant purchase information ready.
