จีนี่ 3042-TKH

Genie SilentMax 1000 Garage Door Opener Instruction Manual

Model: 3042-TKH

การแนะนำ

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Genie SilentMax 1000 Garage Door Opener. The SilentMax 1000 is designed for quiet and reliable operation, featuring a 140V DC motor and a durable belt drive system. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

ข้อมูลด้านความปลอดภัยที่สำคัญ: Always follow all safety warnings and instructions provided in this manual and on the product itself. Failure to do so may result in serious injury or property damage.

การติดตั้งและการตั้งค่า

The Genie SilentMax 1000 is designed for straightforward installation. It includes a premium reinforced low-profile C-channel rail system for easier assembly.

ส่วนประกอบที่รวมอยู่

แพ็คเกจของคุณประกอบด้วยสิ่งของดังต่อไปนี้:

Genie SilentMax 1000 Garage Door Opener and included accessories

Image: Genie SilentMax 1000 opener head unit with two remotes, a wireless keypad, Safe-T-Beam sensors, and a section of the belt drive.

Included accessories for Genie SilentMax 1000

ภาพ: ภาพระยะใกล้ view of the included accessories: two pre-programmed remotes, a multi-function wall console, a wireless keypad, and the Safe-T-Beam system.

ความเข้ากันได้ของประตู

This opener is suitable for residential sectional garage doors or one-piece doors.

Unsupported Door Configurations: High lift doors, vertical lift doors, and doors larger than 8 feet in height are not compatible.

Diagram showing supported and unsupported garage door configurations

Image: A diagram illustrating various garage door styles and their compatibility with the SilentMax 1000, indicating supported residential sectional or one-piece doors up to 750 lbs and 7 ft high, and listing unsupported types.

เสร็จสิ้นขั้นตอนการติดตั้งview

Refer to the detailed installation instructions included in your package for step-by-step guidance. Key steps typically include:

  1. Assemble the C-channel rail system.
  2. Mount the opener head unit to the ceiling.
  3. Attach the rail to the opener and the garage door header bracket.
  4. Install the Safe-T-Beam sensors.
  5. Wire the wall console.
  6. เชื่อมต่อแหล่งจ่ายไฟ
  7. Perform initial programming and limit setting.
Man installing Genie SilentMax 1000 garage door opener

Image: A person installing the Genie SilentMax 1000 garage door opener head unit onto the ceiling brackets, demonstrating a step in the installation process.

คำแนะนำการใช้งาน

Your Genie SilentMax 1000 garage door opener can be operated using the included remotes, wireless keypad, or the multi-function wall console.

การควบคุมการทำงานด้วยรีโมทคอนโทรล

The two 3-button remotes are pre-programmed for convenience. Press any button on the remote to open or close the garage door.

Person using a Genie garage door opener remote inside a car

Image: A person's hand pressing a button on a Genie garage door opener remote control, mounted on a car's sun visor, illustrating remote operation.

Wireless Keypad Operation

To operate the door using the wireless keypad, enter your personalized access code followed by the "Program" or "Enter" button (refer to keypad instructions for specific button).

Person entering code on Genie wireless keypad

Image: A person's hand pressing buttons on a Genie wireless keypad mounted outside a garage door, demonstrating entry of an access code.

Multi-Function Wall Console

The wall console provides convenient control from inside your garage.

Intellicode Security Technology

The SilentMax 1000 features Intellicode Security technology, which automatically changes the access code on each door activation. This prevents unauthorized access by making it virtually impossible for others to duplicate your code.

คุณสมบัติด้านความปลอดภัย

Your Genie SilentMax 1000 is equipped with several safety features to protect users and property.

Safe-T-Beam System

The Safe-T-Beam system utilizes an invisible infrared beam across the garage door opening. If an object breaks this beam while the door is closing, the door will automatically reverse to prevent accidents. The beams also feature diagnostic technology to alert you if a malfunction occurs.

Genie Safe-T-Beam sensors installed near garage door

Image: A pair of Genie Safe-T-Beam sensors mounted on either side of a garage door opening, illustrating their placement for safety detection.

Automatic Reverse and Force Sensing

In addition to the Safe-T-Beam system, the opener is designed to automatically reverse if it encounters an obstruction during closing, even if the Safe-T-Beam is not activated. It also features force sensing to ensure the door operates within safe parameters.

การซ่อมบำรุง

การบำรุงรักษาอย่างสม่ำเสมอจะช่วยให้เครื่องเปิดประตูโรงรถของคุณใช้งานได้ยาวนานและปลอดภัย

การแก้ไขปัญหา

This section addresses common issues you might encounter with your garage door opener.

ปัญหาทั่วไปและแนวทางแก้ไข

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Opener does not operate from any control.No power to opener.Check power outlet, circuit breaker, or fuse. Ensure opener is plugged in.
Door closes but immediately reverses.Safe-T-Beam obstructed or misaligned; closing force too high.Check and clear any obstructions from the Safe-T-Beam path. Ensure sensors are aligned (LEDs should be steady). Adjust closing force if necessary (refer to main manual).
รีโมทคอนโทรลไม่ทำงานDead battery; remote out of range; remote not programmed.Replace remote battery. Move closer to the opener. Reprogram the remote (refer to programming section in main manual).
ประตูเปิดได้แต่ปิดไม่ได้Safe-T-Beam obstruction or misalignment.Check and clear any obstructions from the Safe-T-Beam path. Ensure sensors are aligned (LEDs should be steady).
Opener lights do not turn on.Bulbs burned out or loose.Replace bulbs (up to 100W incandescent or equivalent LED). Ensure bulbs are securely tightened.

For more detailed troubleshooting steps, please consult the full owner's manual provided with your product or visit the Genie support webเว็บไซต์.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่นSilentMax 1000 Model 3042-TKH
ประเภทมอเตอร์มอเตอร์ 140V DC
ประเภทไดรฟ์สายพานไดรฟ์
แรงม้า0.75 เอชพีซี
เล่มที่tage120 โวลต์
น้ำหนักสินค้า32.8 ปอนด์
ขนาดสินค้า11.5 x 9.5 x 40 นิ้ว
Door Height CoverageLifts 7-foot high garage doors (8-foot with extension kit sold separately)
ประเภทการติดตั้งติดประตู, ติดผนัง
การรับรองได้รับการรับรองจาก UL
รวมแบตเตอรี่4 CR2 batteries (for accessories)
อายุการใช้งานแบตเตอรี่โดยเฉลี่ย2 ปี

ข้อมูลการรับประกัน

The Genie SilentMax 1000 Garage Door Opener comes with the following limited warranties:

Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty documentation included with your product.

การสนับสนุนลูกค้า

For technical assistance, replacement parts, or further inquiries, please contact Genie customer support.

Genie customer service is based in the U.S.A.

เอกสารที่เกี่ยวข้อง - 3042-ทีเคเอช

พรีview คู่มือการเปลี่ยนฝาครอบ DC ของ Genie SilentMax 1000 (3042)
คำแนะนำโดยละเอียดสำหรับการเปลี่ยนฝาครอบหัวจ่ายไฟ DC ของเครื่องเปิดประตูโรงรถ Genie SilentMax 1000 (รุ่น 3042) รวมถึงคำเตือนด้านความปลอดภัยและขั้นตอนการซ่อมแซมอย่างละเอียดเพื่อให้การซ่อมแซมประสบความสำเร็จ
พรีview คู่มือการประกอบและติดตั้งเครื่องเปิดประตูโรงรถแบบโซ่/สายพาน Genie
คำแนะนำการประกอบและการติดตั้งอย่างครอบคลุมสำหรับเครื่องเปิดประตูโรงรถ Genie Chain and Belt Drive รวมถึงคำเตือนด้านความปลอดภัย รายการชิ้นส่วน คำแนะนำเครื่องมือ และคำแนะนำทีละขั้นตอน
พรีview คู่มือการใช้งานและการบำรุงรักษาเครื่องเปิดประตูโรงรถ Genie - รุ่น PowerMax, PowerLift, SilentMax, IntelliG
คู่มือการใช้งานและการบำรุงรักษาฉบับสมบูรณ์สำหรับเครื่องเปิดประตูโรงรถ Genie ครอบคลุมการติดตั้ง การตั้งโปรแกรม คุณสมบัติด้านความปลอดภัย การแก้ไขปัญหา และการบำรุงรักษาสำหรับรุ่นต่างๆ เช่น PowerMax, PowerLift, SilentMax, IntelliG และอื่นๆ รวมถึงข้อมูลระบบ Intellicode 2 และ Safe-T-Beam ด้วย
พรีview คู่มือการติดตั้งเครื่องเปิดประตูโรงรถแบบใช้โซ่/สายพาน Genie
คู่มือการติดตั้งอย่างละเอียดสำหรับเครื่องเปิดประตูโรงรถแบบใช้โซ่/สายพาน Genie ครอบคลุมถึงข้อควรพิจารณาก่อนการติดตั้ง การประกอบ การติดตั้ง การเดินสายไฟ และการตรวจสอบขั้นสุดท้าย รวมถึงคำเตือนด้านความปลอดภัยและเครื่องมือที่แนะนำ
พรีview คู่มือการเปลี่ยนชุดเฟือง Genie
คำแนะนำทีละขั้นตอนในการเปลี่ยนชุดสเตอร์บนเครื่องเปิดประตูโรงรถ Genie รวมถึงคำเตือนที่สำคัญ ขั้นตอนโดยละเอียด และคำอธิบายแผนผัง
พรีview Genie Belt/Chain Drive Garage Door Opener Programming, Operation & Maintenance Manual
This manual provides comprehensive instructions for the programming, operation, and maintenance of Genie Belt/Chain Drive Garage Door Openers, including models 1035, 2033, 2035, 2036, 2053, 2055, 3033, 3035, 3053, 3055, 7033, 7035, 7053, and 7055. It covers safety information, features, programming procedures, maintenance, troubleshooting, and replacement parts.