1. บทนำ
This manual provides essential information for the proper installation, operation, and maintenance of your BOURNS 3852A-162-501A Cermet Potentiometer. Please read these instructions carefully before use to ensure optimal performance and longevity of the device.
The BOURNS 3852A-162-501A is a single-turn cermet potentiometer designed for panel mounting, offering a resistance of 500 Ohms with a 10% tolerance and a 2-watt power rating. Its robust construction makes it suitable for various industrial and electronic applications requiring precise resistance adjustment.
2. สินค้าหมดview
Figure 1: BOURNS 3852A-162-501A Cermet Potentiometer. This image shows the potentiometer with its three solder lugs for electrical connection and the threaded shaft for panel mounting and adjustment.
3. การตั้งค่าและการติดตั้ง
3.1 ข้อควรระวังเพื่อความปลอดภัย
- Ensure all power is disconnected before installation or wiring.
- สวมใส่อุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสม เช่น แว่นตานิรภัย
- Handle with care to avoid damaging the terminals or the internal mechanism.
3.2 คำแนะนำในการติดตั้ง
- Prepare a suitable panel opening for the potentiometer's threaded shaft (6.35mm diameter).
- Insert the potentiometer shaft through the panel opening.
- Secure the potentiometer to the panel using the provided nut and washer. Tighten firmly but do not overtighten.
3.3 การเชื่อมต่อทางไฟฟ้า
The potentiometer features solder lugs for electrical connections. Refer to your circuit diagram for specific wiring. A typical connection involves:
- Terminal 1 (End Terminal): Connect to one end of the voltage source or signal.
- Terminal 2 (Wiper Terminal): Connect to the output or variable resistance point.
- Terminal 3 (End Terminal): Connect to the other end of the voltage source or ground.
Ensure clean, secure solder joints to prevent intermittent connections or resistance fluctuations.
4. คู่มือการใช้งาน
The BOURNS 3852A-162-501A is a single-turn potentiometer, meaning its full resistance range is covered within one complete rotation of the shaft.
- การปรับแต่ง: Rotate the shaft clockwise or counter-clockwise to adjust the resistance value.
- ช่วงความต้านทาน: The resistance will vary from approximately 0 Ohms to 500 Ohms as the shaft is rotated from one extreme to the other.
- การติดตาม: Use a multimeter or appropriate measurement device to verify the desired resistance or voltage output during adjustment.
บันทึก: Avoid forcing the shaft beyond its mechanical stops, as this can cause internal damage to the potentiometer.
5. การบำรุงรักษา
The BOURNS 3852A-162-501A Cermet Potentiometer is designed for long-term reliability with minimal maintenance. However, adhering to these guidelines can extend its lifespan:
- การทำความสะอาด: Keep the potentiometer free from dust, dirt, and moisture. Use a soft, dry cloth for external cleaning. Avoid using solvents or abrasive cleaners.
- สภาพแวดล้อม : Operate and store the potentiometer within its specified temperature and humidity ranges to prevent degradation.
- การตรวจสอบ: Periodically inspect solder connections for integrity and ensure the mounting nut remains secure.
6 การแก้ไขปัญหา
If you encounter issues with your potentiometer, consider the following common troubleshooting steps:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No resistance change / Open circuit |
|
|
| Intermittent resistance / Noise |
|
|
| Resistance value out of specification |
|
|
7. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | 3852A-162-501A |
| พิมพ์ | Cermet Potentiometer |
| ความต้านทานที่กำหนด | 500 โอห์ม |
| ความอดทน | ±10% |
| ระดับพลังงาน | 2 วัตต์ |
| Turns (Electrical/Mechanical) | 1 Turn / 1 Turn |
| เส้นผ่านศูนย์กลางเพลา | 6.35มม. |
| ขนาด (กว้าง x ยาว x สูง) | 19.05 x 19.05 x 23.55mm (approximate body dimensions) |
| ประเภทการติดตั้ง | Solder Lug Panel Mount |
| ผู้ผลิต | เบิร์นส์ |
8. ข้อมูลการรับประกัน
BOURNS products are manufactured to high-quality standards. This potentiometer is covered by the standard manufacturer's warranty against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please refer to the official BOURNS website or contact their customer service for detailed warranty terms and conditions specific to the 3852A-162-501A model.
Damage resulting from improper installation, misuse, unauthorized modification, or operation outside of specified environmental limits is not covered by the warranty.
9. การสนับสนุนลูกค้า
For technical assistance, product inquiries, or warranty claims, please contact BOURNS customer support:
- Webเว็บไซต์: Visit the official BOURNS website for product datasheets, application notes, and contact information.
- แบบฟอร์มติดต่อ: Use the contact form available on their webไซต์สำหรับการสอบถามข้อมูลเฉพาะ
- จำหน่าย: Contact your authorized BOURNS distributor for local support.
When contacting support, please have your product model number (3852A-162-501A) and purchase details readily available.
