คู่มือการใช้งานไมโครโฟนคอนเดนเซอร์แบบซูเปอร์คาร์ดิออยด์ BOYA BY-BM3031

การแนะนำ

The BOYA BY-BM3031 is a broadcast-quality supercardioid condenser shotgun microphone designed to capture clear, high-quality audio. It is suitable for use with DSLRs, camcorders, and audio recorders, making it ideal for videographers, sound designers, and film producers in various indoor and outdoor recording scenarios.

This manual provides detailed instructions on the setup, operation, maintenance, and troubleshooting of your BY-BM3031 microphone to ensure optimal performance and longevity.

เนื้อหาแพ็คเกจ

Upon unboxing your BOYA BY-BM3031, please verify that all the following components are included:

• BY-BM3031 ไมโครโฟน
• โฟมกระจกบังลม
• Fur Windscreen (Windjammer)
• กระเป๋าใส่อุปกรณ์
• คู่มือการใช้งาน (เอกสารนี้)

หมายเหตุ: ต้องใช้แบตเตอรี่ AA สองก้อนจึงจะทำงานได้ และจำหน่ายแยกต่างหาก

คุณสมบัติหลัก

• Supercardioid Polar Pattern: Focuses audio capture directly in front of the microphone, reducing side and rear noise.
• Three-level Gain Switch: Provides options for +20 dB boost, 0 dB unity gain, or -10 dB pad to prevent distortion from audio overload.
• Switchable High-Pass Filter (80 Hz): Helps to roll off unwanted low-frequency noise and rumble, such as air conditioning or traffic sounds.
• Integrated Shockmount: Designed to eliminate vibrations and handling noise, ensuring cleaner audio recordings.
• 1/8" (3.5 mm) Headphone Monitor Jack: Allows real-time audio monitoring directly from the microphone, preventing recording errors.
• โครงสร้าง ABS ทนทาน: รับประกันประสิทธิภาพที่แข็งแกร่งและใช้งานได้ยาวนาน
• ใช้พลังงานจากแบตเตอรี่: Operates on two AA batteries for portable use.

คู่มือการติดตั้ง

1. การติดตั้งแบตเตอรี่

The BY-BM3031 requires two AA batteries for operation. Ensure the microphone is turned off before installing or replacing batteries.

1. หาช่องใส่แบตเตอรี่ที่อยู่ด้านล่างของตัวไมโครโฟน
2. เปิดฝาช่องใส่แบตเตอรี่
3. ใส่แบตเตอรี่ AA สองก้อน โดยสังเกตขั้วที่ถูกต้อง (+/-) ตามที่ระบุไว้ภายในช่องใส่แบตเตอรี่
4. ปิดฝาช่องใส่แบตเตอรี่ให้แน่น

Image: The battery compartment of the BY-BM3031 microphone, showing the correct orientation for inserting two AA batteries.

2. Attaching to Camera/Device

The microphone features an integrated cold shoe mount with a 1/4"-20 threaded mount for versatile attachment.

1. Slide the microphone's cold shoe mount into your camera's hot shoe or cold shoe adapter.
2. Tighten the locking wheel on the microphone's mount to secure it in place.
3. Alternatively, use the 1/4"-20 thread to mount the microphone onto a tripod, boom pole, or stand.

Image: The BY-BM3031 microphone securely mounted on a DSLR camera, ready for recording.

3. Connecting to Audio Input

The BY-BM3031 comes with an integrated 1/8" (3.5 mm) coiled cable for connecting to your recording device.

1. Plug the 3.5 mm connector of the microphone's coiled cable into the microphone input jack of your DSLR, camcorder, or audio recorder.
2. Ensure the connection is firm to avoid audio dropouts.

Image: The BY-BM3031 microphone with its integrated coiled 3.5mm cable, ready for connection.

4. Attaching Windscreen

Use the appropriate windscreen based on your recording environment.

• กระจกบังลมโฟม: Ideal for indoor use or light wind conditions to reduce plosives and breath noise. Slide it over the microphone capsule.
• Fur Windscreen (Windjammer): Recommended for outdoor use or windy conditions to significantly reduce wind noise. Slide it over the foam windscreen for best results.

คำแนะนำการใช้งาน

1. การเปิด/ปิดเครื่อง

Locate the power switch on the microphone body. Slide it to the "ON" position to power on the microphone. Slide it to "OFF" when not in use to conserve battery life.

2. Adjusting Gain Control

The BY-BM3031 features a three-position gain control switch to optimize your audio levels. Adjust this based on the loudness of your sound source and the input sensitivity of your recording device.

• +20 เดซิเบล: Use this setting for quiet sound sources or when your recording device's input is low. This boosts the microphone's output.
• 0 เดซิเบล: This is the standard, unity gain setting, suitable for most general recording situations.
• -10 เดซิเบล: Use this pad setting for very loud sound sources to prevent audio clipping and distortion.

ภาพ: ระยะใกล้ view of the gain control and high-pass filter switches on the BY-BM3031.

3. การใช้ตัวกรองความถี่สูง

The high-pass filter (HPF) helps to eliminate unwanted low-frequency noise. It has two settings:

• แบน: No filter applied. Use when you want to capture the full frequency range of your audio.
• 80 เฮิรตซ์: Activates the high-pass filter at 80 Hz. This is useful for reducing rumble from air conditioners, traffic, or handling noise.

4. การตรวจสอบเสียง

The 3.5 mm headphone jack on the microphone allows you to monitor your audio in real-time. This is crucial for ensuring proper levels and sound quality during recording.

1. Plug your headphones into the 3.5 mm headphone jack on the rear panel of the microphone.
2. Listen carefully to the audio being recorded. Adjust the gain control and high-pass filter as needed to achieve clear, undistorted sound.

Image: The BY-BM3031 in use during a studio recording session, demonstrating its application.

Image: The BY-BM3031 capturing audio during a musical performance.

Image: The BY-BM3031 used for recording at an event.

Image: The BY-BM3031 capturing audio during a presentation or lecture.

การซ่อมบำรุง

Proper maintenance will extend the life and performance of your BY-BM3031 microphone.

• การทำความสะอาด: Use a soft, dry cloth to wipe the microphone body. Do not use harsh chemicals or abrasive cleaners.
• พื้นที่จัดเก็บ: When not in use, store the microphone in its carrying pouch to protect it from dust, moisture, and physical damage.
• แบตเตอรี่: Remove batteries if the microphone will not be used for an extended period to prevent leakage and damage.
• หลีกเลี่ยงความชื้น: Keep the microphone away from water and high humidity.
• จัดการด้วยความระมัดระวัง: ควรหลีกเลี่ยงการทำไมโครโฟนตกหรือกระแทกอย่างแรง

การแก้ไขปัญหา

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

BOYA products are designed and manufactured to high-quality standards. For specific warranty information and support, please refer to the warranty card included with your product or visit the official BOYA webเว็บไซต์.

Spare parts for this product are available for a duration of 2 years within the EU.

For technical assistance or service inquiries, please contact BOYA customer support through their official channels.