สินค้าเกินview
The Kidde i4618AC is an ionization smoke alarm designed for residential use. It operates on a 120V AC power source and includes a 9V battery backup for continuous protection during power outages. This model features an easy-access slide-load front battery door, simplifying battery replacement and activation.
It is interconnectable with up to 24 compatible devices, including other smoke, carbon monoxide (CO), and heat alarms, allowing for a synchronized alert system throughout your home. The alarm also includes a tamper-resist locking feature to prevent unauthorized removal.
การติดตั้งและการตั้งค่า
Proper installation is crucial for the effective operation of your smoke alarm. Follow these steps carefully:
- การตัดการเชื่อมต่อไฟฟ้า: Before beginning installation, ensure that the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker box.
- การติดตั้งฐานติดตั้ง: The large mounting base simplifies installation and helps cover any imperfections on the wall or ceiling surface. Secure the mounting base using appropriate screws (not included) into a ceiling joist or wall stud, or use suitable anchors if mounting to drywall.
- การเชื่อมต่อสายไฟ: The alarm comes with a pre-stripped wiring harness and an easy-off cap. Connect the alarm's wiring to your household electrical wiring (120V AC) according to local electrical codes. The tinned strands on the wiring harness are designed to increase conductivity and improve wire nut grip.
- การเปิดใช้งานแบตเตอรี่: The front battery pull tab allows for battery activation without removing the alarm from its mounting bracket. Insert a fresh 9V battery into the front-loading battery door. Ensure correct polarity (+ to + and - to -).
- Alarm Attachment: Once wiring and battery are in place, attach the smoke alarm unit to the mounting base by aligning the tabs and twisting clockwise until it locks securely.
- Power Restoration & Testing: Restore power to the circuit. The alarm should chirp once to indicate it has power. Press and hold the Test/Hush button to test the alarm. A loud, pulsating alarm should sound. If no alarm sounds, refer to the Troubleshooting section.
This image displays the Kidde i4618AC smoke alarm. The battery compartment is open, revealing a red 9V battery. The text on the alarm indicates "IMPORTANT: SEE OWNERS MANUAL FOR COMPLETE OPERATING INSTRUCTIONS" and "WARNING: MODELS WITHOUT BATTERY BACKUP". The battery itself is labeled "9V Battery For All Electronic Applications No. 1604P". The image highlights the easy-access front-loading battery door.
คำแนะนำการใช้งาน
Your Kidde i4618AC smoke alarm is designed for continuous operation and requires minimal user interaction under normal conditions.
- การทำงานปกติ: The alarm continuously monitors for smoke. A small red LED indicator light will flash approximately once every 30-40 seconds to confirm that the alarm is receiving power and functioning correctly.
- สภาพปลุก: In the event of smoke detection, the alarm will emit a loud, pulsating sound (three long beeps followed by a pause, repeated). The red LED will flash rapidly in conjunction with the alarm sound. If interconnected with other compatible alarms, all interconnected units will also sound.
- Hush Mode: For nuisance alarms (e.g., from cooking smoke), press the large, centrally located Test/Hush button. This will temporarily silence the alarm for approximately 7-10 minutes. The red LED will flash every 10 seconds during Hush mode. The alarm will automatically reset after the Hush period, or sooner if smoke density increases.
- หน่วยความจำปลุก: In an interconnected system, if one alarm triggers the others, the initiating alarm will flash its red LED every 1.5 seconds for approximately 10 minutes after the alarm condition has cleared. This feature helps identify the source of the alarm.
- คำเตือนแบตเตอรี่ต่ำ: When the 9V battery backup is low, the alarm will chirp approximately once every 30-40 seconds. This indicates that the battery needs to be replaced immediately.
การซ่อมบำรุง
Regular maintenance ensures the continued reliability of your smoke alarm.
- การทดสอบรายเดือน: Test your smoke alarm monthly by pressing and holding the Test/Hush button until the alarm sounds. This confirms the alarm's electronic circuitry, horn, and battery are working.
- การเปลี่ยนแบตเตอรี่: Replace the 9V battery annually, or immediately when the low battery chirp sounds. Use only recommended 9V batteries. The front-loading battery door makes this process convenient.
- การทำความสะอาด: Clean your smoke alarm at least once a year. Gently vacuum the alarm's cover and vents with a soft brush attachment to remove dust and debris. A dust cover is included to protect the sensor from contaminates during construction, reducing nuisance alarms. Do not paint the alarm.
- การเปลี่ยนสัญญาณเตือนภัย: Smoke alarms have a limited lifespan. It is recommended to replace your smoke alarms every 10 years from the date of manufacture. Refer to the date code on the back of the alarm.
การแก้ไขปัญหา
If your smoke alarm is not functioning as expected, consult the following common issues:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เสียงเตือนจะดังขึ้นทุกๆ 30-40 วินาที | Low 9V battery backup. | เปลี่ยนแบตเตอรี่ 9V ทันที |
| Alarm sounds frequently without apparent smoke. | Dust or debris in the sensor chamber; high humidity; cooking fumes; steam. | Clean the alarm as described in the Maintenance section. Use Hush mode for temporary silencing during cooking. Ensure proper ventilation. |
| ไม่มีเสียงสัญญาณเตือนดังระหว่างการทดสอบ | No power (AC or battery); faulty unit. | Check circuit breaker and ensure battery is correctly installed. If issues persist, replace the unit. |
| ไฟ LED สีแดงไม่กะพริบ | ไม่มีไฟฟ้ากระแสสลับ | Check AC power connection and circuit breaker. Ensure the alarm is properly seated on its mounting base. |
For persistent issues not covered here, please contact Kidde customer support or consult a qualified electrician.
ข้อมูลจำเพาะ
- หมายเลขรุ่น: i4618AC
- แหล่งพลังงาน: 120V AC with 9V Battery Backup
- ประเภทเซนเซอร์: การแตกตัวเป็นไอออน
- ขนาดสินค้า : 4.72 x 3.94 x 3.94 นิ้ว
- น้ำหนัก: 3.04 ปอนด์
- อุณหภูมิในการทำงาน: 40°F ถึง 100°F (4.4°C ถึง 37.8°C)
- การเชื่อมต่อระหว่างกัน: อุปกรณ์ Kidde สูงสุด 24 เครื่อง (เริ่มต้นการทำงาน 18 เครื่อง)
- ผู้ผลิต: คิดเด
การรับประกันและการสนับสนุน
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Kidde website. If you require technical assistance or have questions regarding your Kidde i4618AC smoke alarm, please contact Kidde Customer Support.
Kidde Customer Support:
- Webเว็บไซต์: www.คิดเด้.com
- โทรศัพท์: โปรดดูที่บรรจุภัณฑ์ของผลิตภัณฑ์ หรือ webเว็บไซต์สำหรับหมายเลขติดต่อปัจจุบันที่สุด
