คู่มือการใช้งานชุดควบคุมไฟ LED อเนกประสงค์และอุปกรณ์เสริม Rough Country MLC-6

1. สินค้าหมดview

The Rough Country MLC-6 Universal LED Light & Accessory Controller is designed to provide centralized control for up to six auxiliary electrical devices in your vehicle. This system simplifies wiring and offers a clean, integrated solution for managing various accessories such as LED lights, winches, and air compressors.

คุณสมบัติหลัก:

• Seamless Lighting & Accessory Control: Manage up to six LED lights or accessories with quick access and control.
• Multi-Switch Control: Compact LED lit 6-switch hub fits into most vehicles, providing on/off accessory control.
• Plug-and-Play System: Features an inline fused relay for safe connection of up to 6 devices without splicing into factory wiring.
• Optimized Power Control: Includes Low Voltage Cutoff Protection (LVCO), a 12-terminal block, six 40A relays, and six 30A fuses for safe, reliable accessory power.
• Complete Kit: Includes power distribution block, 6-switch hub, mounting brackets, hardware, and high temperature abrasion resistant cables.

2. อะไรอยู่ในกล่อง

ตรวจสอบว่าส่วนประกอบทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณ:

• 6-Switch Panel
• ชุดสายไฟ
• ขายึด
• Relay Box (Power Distribution Block)
• สายแบตเตอรี่
• ฮาร์ดแวร์

3. การตั้งค่าและการติดตั้ง

This section provides general installation guidelines. For detailed, vehicle-specific instructions, refer to the included manual or Rough Country's official resources.

3.1. Mounting the Control Box (Power Distribution Block)

The power distribution block should be mounted in a secure, accessible location, typically within the engine bay. Ensure the chosen location is away from excessive heat, moving parts, and direct water spray.

Use the provided mounting brackets and hardware to secure the control box. Some installations may require minor drilling. Ensure the mounting is robust to withstand vehicle vibrations.

3.2. Wiring the Power Distribution Block

Connect the main power and ground wires from the vehicle's battery to the power distribution block. The thick red wire connects to the positive battery terminal, and the thick black wire connects to the negative battery terminal. Ensure all connections are tight and secure.

An ignition-switched 12V source is required for the control unit's thin red wire. Use the supplied fuse adapter to tap into an appropriate ignition fuse in your vehicle's fuse box. This ensures the system powers on and off with the vehicle.

The system features a resettable 80A circuit breaker for protection. If the breaker trips, reset it by pushing the lever back down.

3.3. Switch Panel Installation

Route the switch panel's wiring harness from the engine bay into the vehicle's cabin. This typically involves passing the wire through an existing grommet in the firewall and routing it along the A-pillar or under the dashboard to the desired switch panel mounting location.

The compact 6-switch hub can be mounted in various locations within the cabin, such as above the rearview mirror, in the glove compartment, or on the dashboard. Use the supplied brackets and hardware for a secure installation.

3.4. การเชื่อมต่ออุปกรณ์เสริม

Connect your auxiliary LED lights or other electrical devices to the 12-terminal block on the power distribution block. Each terminal corresponds to a switch on the control panel. Ensure proper positive and negative connections for each accessory.

The system is designed for plug-and-play functionality, eliminating the need for complex wiring or splicing into existing factory wiring.

3.5. วิดีโอแนะนำการติดตั้ง

For a visual guide on the installation process, please refer to the official Rough Country MLC-6 installation video below:

4. การดำเนินการ

4.1. Using the Switches

Each button on the 6-switch panel controls a connected accessory. Press a button to turn the corresponding accessory on or off. The LED backlighting on the switches indicates their active status.

4.2. ระดับเสียงต่ำtage Cutoff Protection (LVCO)

The MLC-6 system is equipped with Low Voltage Cutoff Protection (LVCO). This feature automatically detects the vehicle's battery voltage and will cut off power to accessories if the battery voltage falls below a safe operating threshold. This prevents excessive battery drain and ensures sufficient power remains to start your vehicle.

4.3. Customizing Switch Labels

The kit includes various interchangeable switch covers with different icons to match your connected accessories. To change a switch cover, carefully use a switch removal tool (if provided) or a small flat-head tool to pry off the existing cover, then snap the desired new cover into place.

5. การบำรุงรักษา

• การตรวจสอบปกติ: Periodically check all wiring connections for tightness and signs of corrosion. Ensure the power distribution block and switch panel are securely mounted.
• ความสะอาด : Keep the switch panel and power distribution block free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning.
• การเปลี่ยนฟิวส์: If an accessory stops working, check the corresponding fuse in the power distribution block. Replace blown fuses with new ones of the correct amperage (30A for most, 40A for relays).
• เบรกเกอร์: Ensure the 80A circuit breaker is in the "ON" position. If it trips frequently, investigate the connected accessories for potential overloads or short circuits.

6 การแก้ไขปัญหา

• Accessory Not Functioning:
  • Check the corresponding switch on the panel to ensure it is in the "ON" position.
  • Verify the fuse for that accessory in the power distribution block. Replace if blown.
  • Inspect the wiring connection for the accessory at the terminal block and the accessory itself.
• Entire System Not Powering On:
  • Check the main 80A circuit breaker to ensure it is not tripped.
  • Verify the main power and ground connections at the vehicle battery.
  • Ensure the ignition-switched 12V source (thin red wire) is receiving power when the vehicle is on. Check the fuse for this connection.
• ท่อระบายน้ำแบตเตอรี่:
  • Confirm the LVCO feature is functioning correctly. If accessories remain on after the vehicle is off and battery voltage drops, consult a professional.
  • Ensure no accessories are drawing power when the vehicle is off, unless intentionally wired for constant power.

7. ข้อมูลจำเพาะ

8. ข้อมูลด้านความปลอดภัย

แนะนำการติดตั้งอย่างมืออาชีพ: Rough Country recommends that a certified technician install lift systems and other complex automotive accessories. Knowledge of Rough Country instructions, suspension procedures, and post-installation checks are required. Installation without proper knowledge and expertise may impact the integrity and operating safety of your vehicle.

Regular Vehicle Inspection: ผู้ซื้อมีหน้าที่ตรวจสอบความแน่นของน็อตและสกรูทั้งหมดหลังจากใช้งานครบ 500 ไมล์แรก และอีกครั้งทุกๆ 1,000 ไมล์ ส่วนการตั้งศูนย์ล้อ ระบบบังคับเลี้ยว ระบบช่วงล่าง และระบบส่งกำลัง ต้องได้รับการตรวจสอบโดยช่างเครื่องยนต์มืออาชีพที่มีคุณสมบัติเหมาะสม อย่างน้อยทุกๆ 3,000 ไมล์

คำเตือนข้อเสนอ 65: ผลิตภัณฑ์นี้อาจมีสารเคมีที่รัฐแคลิฟอร์เนียทราบว่าก่อให้เกิดมะเร็ง ความพิการแต่กำเนิด หรืออันตรายต่อระบบสืบพันธุ์อื่นๆ

9. การรับประกันและการสนับสนุน

The Rough Country MLC-6 Universal LED Light & Accessory Controller is backed by Rough Country's 3-Year warranty. For warranty claims, technical support, or additional product information, please visit the official Rough Country webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา

Rough Country Store: Visit the Rough Country Store on Amazon