การแนะนำ
This manual provides detailed instructions for the installation, operation, and troubleshooting of the Zooz 800 Series Z-Wave Long Range Toggle Dimmer, model ZEN74 800LR. This device is designed for wireless brightness control of lighting fixtures within a Z-Wave smart home system. It supports both manual and remote control, offering advanced features for modern lighting management.
ข้อมูลจำเพาะ
- หมายเลขรุ่น: เซน74 800LR
- ภูมิภาค Z-Wave: US / MX / CA
- พลัง: 120 VAC, 60 เฮิร์ตซ์
- โหลดสูงสุด: 100W LED, 300W Incandescent
- กลุ่มผลิตภัณฑ์ Z-Wave: Up to 300 feet line of sight (up to 1300 ft with Z-Wave Long Range)
- อุณหภูมิในการทำงาน: 32-104°ฟาเรนไฮต์ (0-40°เซลเซียส)
- การติดตั้งและการใช้งาน: ในร่มเท่านั้น
- โปรโตคอลการเชื่อมต่อ: Z-เวฟ
- ประเภทวงจร: 3 ทาง
- น้ำหนักสินค้า: 5.3 ออนซ์
- ขนาด : Approximately 1.1 inches deep for easy fit in electrical boxes.
บันทึก: Do NOT connect this switch to ceiling fans, motors, or home appliances. Use with lighting only.
การติดตั้งและการตั้งค่า
Important: A neutral wire is required for installation. Ensure power is off at the circuit breaker before beginning any electrical work. This dimmer is designed for direct 3-way and 4-way installations without the need for add-on switches, working with existing mechanical 3-way switches (do not connect to other dimmers).
ข้อควรพิจารณาในการเดินสายไฟ
- Always identify the line (hot) and load (light) wires.
- Install the ZEN74 dimmer in the electrical box that has a direct connection to power.
- Do NOT use the ZEN74 model as a direct replacement for older ZEN23 or ZEN24 switches in multi-point control setups, as wiring differs. Always follow the appropriate diagram.
แผนผังสายไฟ
Refer to the following diagrams for common 3-way and 4-way wiring configurations. These diagrams illustrate the connection of the ZEN74 dimmer with existing mechanical switches.
รูปที่ 1: 3-Way Wiring Diagram Option 1. This diagram shows the wiring configuration for a 3-way setup where the power line enters the box with the ZEN74 dimmer, and a traveler wire connects to a mechanical switch in the second box.
รูปที่ 2: 3-Way Wiring Diagram Option 2. This diagram illustrates an alternative 3-way wiring setup, detailing connections for the ZEN74 dimmer and a mechanical switch.
รูปที่ 3: 4-Way Wiring Diagram Option 2. This diagram provides the wiring instructions for a 4-way lighting system, showing how to integrate the ZEN74 dimmer with multiple mechanical switches.
รวม Z-Wave
To integrate the dimmer into your Z-Wave network, follow your Z-Wave hub's instructions for adding a new device. The ZEN74 800LR features an 800 series Z-Wave chip for faster response and improved range, supporting Z-Wave Long Range for ultra-reliable direct hub-to-device communication (requires a compatible LR hub).
การดำเนินการ
การควบคุมด้วยมือ
- Toggle Up (Click): Turns on the light to the last brightness level. The dimmer takes approximately 1 second to reach full brightness. The ramp rate is adjustable via advanced hub settings.
- Toggle Down (Click): Turns off the light with a fade-out effect and a 1-second ramp ประเมิน.
- Toggle Up (Press and Hold): เพิ่มความสว่าง
- Toggle Down (Press and Hold): ลดความสว่าง
After a power failure, the switch will automatically turn on to the last brightness level.
3-Way Installation Operation
In a 3-way installation, the secondary mechanical switch can only turn the light on or off. It will always turn the light on to the last brightness level. Dimming functionality is exclusively available from the primary Zooz switch or through your Z-Wave software.
รีโมทคอนโทรล
The ZEN74 dimmer offers wireless brightness control from your mobile device or computer when included in a Z-Wave gateway controller. It reports its status instantly to the hub.
ความเข้ากันได้
ความเข้ากันได้ของหลอดไฟ
The ZEN74 dimmer allows brightness adjustment between 10% and 100% for popular dimmable LED bulbs. Compatible brands include Amazon Basics, BROADA, CREE, Ecosmart, GE, Halo, Sunco, Utilitech Recessed Dimmable LEDs, and Utilitech Dimmable LEDs.
Do NOT use with Feit, Luminus, or Lithonia bulbs.
Z-Wave Hub Compatibility
This dimmer works with most Z-Wave controllers based on the universal multilevel command class. Smart speakers are NOT Z-Wave hubs; a compatible Z-Wave hub is required to control this switch with voice commands or other smart home integrations.
การแก้ไขปัญหา
ประเด็นทั่วไป
- สวิตช์ไม่ตอบสนอง: Ensure the neutral wire is correctly connected. Verify all wiring connections are secure.
- ปัญหาการหรี่แสง: Check bulb compatibility. Some LED bulbs may flicker or not dim smoothly.
- Inclusion failure: Ensure the dimmer is within range of your Z-Wave hub. Try excluding the device first (if it was previously included) and then re-including it.
Always check your wiring first. A neutral wire is required to complete installation.
การรับประกันและการสนับสนุน
Zooz offers lifetime technical support for its products. The ZEN74 dimmer comes with a 5-year extended warranty once registered. For support, please visit the official Zooz webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา
