คู่มือการใช้งานรางเลื่อนพื้นสำหรับประตูบานเลื่อนยุ้งฉางอลูมิเนียมสีดำ JUBEST FG05

1. บทนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your JUBEST FG05-Black Aluminum Sliding Barn Door Floor Guide. This product is designed to stabilize sliding barn doors, preventing them from swinging out or hitting the wall, ensuring smooth and quiet operation.

Please read these instructions thoroughly before beginning installation to ensure proper setup and optimal performance.

2. ส่วนประกอบผลิตภัณฑ์

ตรวจสอบให้แน่ใจว่ามีส่วนประกอบครบถ้วนก่อนเริ่มการติดตั้ง

• 2 x JUBEST FG05-Black Aluminum Floor Guides
• 4 x Mounting Screws (Black)
• 4 x Wall Anchors (Plastic)

Image 2.1: Included components: two black aluminum floor guides, four black mounting screws, and four white plastic wall anchors.

3. ข้อมูลจำเพาะ

Image 3.1: Detailed dimensions of the JUBEST FG05-Black floor guide.

4. คำแนะนำในการติดตั้ง

The JUBEST FG05-Black floor guide offers versatile installation options to suit various sliding barn door configurations. Ensure the floor surface is clean and level before installation.

4.1. Method 1: Door with Bottom Groove (Hidden Installation)

This method is suitable for doors that have a pre-cut groove along their bottom edge. The guide fits into this groove, providing a clean, hidden appearance.

1. ตำแหน่งประตู: Close the barn door completely to its desired final position.
2. การวางตำแหน่งเครื่องหมาย: Place one floor guide on the floor directly beneath the door's bottom groove. Ensure it is centered within the groove and aligned with the door's path. Mark the positions of the two mounting holes on the floor using a pencil.
3. เจาะรูนำ: Move the door aside. Using an appropriate drill bit for your floor type (wood, concrete, etc.), drill pilot holes at the marked locations. If installing into drywall or hollow surfaces, insert the plastic wall anchors into the pilot holes.
4. รับคู่มือฉบับสมบูรณ์: Align the floor guide with the pilot holes/anchors and secure it firmly to the floor using the provided mounting screws. Do not overtighten.
5. การดำเนินการทดสอบ: Slide the door back and forth to ensure smooth movement and proper engagement with the floor guide.

Image 4.1.1: Floor guide installed with a door featuring a bottom groove for hidden stabilization.

4.2. Method 2: Door without Bottom Groove (Visible Installation / Bypass System)

This method uses two floor guides, one on each side of the door, to keep it stable. This is ideal for doors without a bottom groove or for bypass barn door systems where two doors slide past each other.

1. ตำแหน่งประตู: Close the barn door completely to its desired final position.
2. การวางตำแหน่งเครื่องหมาย: Place one floor guide on the floor on one side of the door, ensuring it is snug against the door's edge and aligned with its path. Mark the mounting holes. Repeat this process for the second floor guide on the opposite side of the door.
3. เจาะรูนำ: Move the door aside. Drill pilot holes at the marked locations. Insert plastic wall anchors if necessary.
4. Secure the Guides: Align each floor guide with its respective pilot holes/anchors and secure them firmly to the floor using the provided mounting screws. Ensure the guides are parallel and properly spaced to allow the door to slide freely between them without excessive play.
5. การดำเนินการทดสอบ: Slide the door back and forth to confirm smooth movement and stability. Adjust guide positions slightly if the door binds or wobbles.

Image 4.2.1: Two floor guides installed on either side of a door without a bottom groove.

ภาพที่ 4.2.2: อดีตample of two floor guides used to stabilize two bypass barn doors.

5. การดำเนินการ

Once installed, the JUBEST FG05-Black floor guide will keep your sliding barn door aligned and prevent it from swaying. The door should slide smoothly along the guide(s) without resistance. If you experience any friction or binding, re-check the alignment and ensure the guides are securely fastened.

Image 5.1: The floor guide integrated into a full barn door system, ensuring stable operation.

6. การบำรุงรักษา

The JUBEST FG05-Black floor guide requires minimal maintenance. Periodically inspect the guides and mounting screws for any signs of loosening or wear. Tighten screws if necessary. Clean the guides and the bottom edge of the door with a damp cloth to remove dust or debris that could impede smooth operation.

7 การแก้ไขปัญหา

• Door wobbles or swings excessively:
  • Ensure the floor guides are securely fastened to the floor.
  • Verify that the guides are positioned correctly and snugly against the door (or within the groove).
  • If using two guides, ensure they are parallel and the spacing is appropriate for the door thickness.
• Door binds or is difficult to slide:
  • Check for any debris or obstructions around the guides or in the door's bottom groove.
  • Ensure the guides are not overtightened, which could cause warping.
  • Verify that the door's bottom groove (if applicable) is clean and free of obstructions.
  • Confirm the guides are aligned perfectly with the door's travel path.
• Guides appear loose after installation:
  • Retighten mounting screws. If screws continue to loosen, consider using stronger anchors or a different mounting location if possible.

8. การรับประกันและการสนับสนุน

JUBEST products are manufactured to high-quality standards. For any questions regarding installation, operation, or if you encounter any issues with your product, please contact JUBEST customer support. Refer to your purchase documentation or the JUBEST webเว็บไซต์สำหรับข้อมูลการติดต่อ

โปรดเก็บหลักฐานการซื้อของคุณไว้เพื่อเรียกร้องการรับประกัน