Monoprice Monolith 4-Tier Audio Stand Instruction Manual

1. บทนำ

The Monoprice Monolith 4-Tier Audio Stand is designed to organize and display your home theater or entertainment system components. It features a sturdy, modular design with open-air shelving to ensure proper ventilation for your equipment.

This manual provides detailed instructions for the assembly, safe operation, and maintenance of your audio stand.

2. ข้อมูลด้านความปลอดภัย

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in property damage or personal injury.

• น้ำหนักจำกัด: Each shelf can support up to 75 lbs (34 kg). The total weight capacity for the entire stand is 300 lbs (136 kg). Do not exceed these limits.
• ส่วนประกอบที่ปลอดภัย: Always ensure all audio/video components are securely placed on the shelves to prevent them from falling.
• พื้นผิวระดับ: Assemble and place the stand on a stable, level surface to prevent tipping.
• เด็กและสัตว์เลี้ยง: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand.
• การระบายอากาศ : The open-air design promotes airflow. Do not block ventilation openings of your electronic components.

3. เนื้อหาบรรจุภัณฑ์

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Monoprice customer support.

• MDF Shelves (4x)
• Steel Support Tubes (various lengths for modular assembly)
• Feet/Spikes (4x)
• อุปกรณ์ประกอบ (สกรู แหวนรอง ฯลฯ)

Figure 1: Fully assembled Monoprice Monolith 4-Tier Audio Stand.

4. คำแนะนำในการประกอบ

Assembly is straightforward and typically requires no special tools. A rubber mallet may be helpful for seating the threaded caps for the feet.

1. เตรียมฐาน:
   • Place one MDF shelf (this will be the bottom shelf) upside down on a soft, clean surface to prevent scratches.
   • Attach the four feet/spikes to the designated holes on the bottom shelf. Ensure they are securely tightened. If using carpet spikes, insert the threaded caps into the bottom of each foot first. A rubber mallet can assist in seating these caps.
2. Attach Support Tubes:
   • Screw the first set of steel support tubes into the top side of the bottom shelf. Ensure they are hand-tightened securely. Note that one set of tubes may be longer to accommodate taller components on a specific tier. Plan your desired configuration.
3. Add Subsequent Shelves:
   • Carefully place the next MDF shelf onto the top of the attached support tubes, aligning the holes.
   • Screw the next set of support tubes into the top of this shelf.
   • Repeat this process for the remaining shelves and support tubes until all four tiers are assembled.
4. Final Tightening and Leveling:
   • Once all shelves and tubes are in place, gently tighten all connections to ensure stability. Do not overtighten.
   • Place the assembled stand in its desired location. Use the adjustable feet/spikes to level the stand. It is recommended to level the front two legs first, then a third leg, and finally the fourth for optimal balance.

รูปที่ 2 : ด้านหน้า view of the assembled stand, showing shelf and tube arrangement.

5. คู่มือการใช้งาน

The Monolith Audio Stand is designed for straightforward use with your audio and video components.

• การจัดวางส่วนประกอบ: Carefully place your audio/video components onto the shelves. Distribute weight evenly across each shelf.
• การจัดการสายเคเบิล: The open-air design and curved rear edges of the shelves facilitate cable routing. Organize cables neatly to prevent tangles and ensure proper airflow.
• การระบายอากาศ : Ensure that the ventilation openings of your electronic devices are not obstructed by other components or cables. The stand's design promotes natural convection cooling.

รูปที่ 3: จากบนลงล่าง view of a shelf, highlighting the curved design for cable access.

6. การบำรุงรักษา

To maintain the appearance and longevity of your audio stand, follow these simple care instructions:

• การทำความสะอาด: Wipe the shelves and steel tubes with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• การตรวจสอบ: ตรวจสอบการเชื่อมต่อทั้งหมดเป็นระยะเพื่อให้แน่ใจว่ายังคงแน่นหนาและปลอดภัย
• หลีกเลี่ยงความชื้น: Do not expose the stand to excessive moisture or direct sunlight for prolonged periods.

7 การแก้ไขปัญหา

If you encounter issues with your Monolith Audio Stand, consider the following:

• ขาตั้งโยกเยก:
  • Ensure the stand is placed on a completely level surface.
  • Adjust the individual feet/spikes to achieve perfect balance.
  • Verify that all support tubes are securely tightened to the shelves.
• Scratches on Shelves:
  • The shelves are designed to be scratch-resistant, but not scratch-proof. Avoid dragging heavy or sharp objects across the surface.
  • Use felt pads under components if concerned about potential scratching.
• ชิ้นส่วนที่ร้อนเกินไป:
  • Ensure adequate space around components for airflow.
  • Verify that no cables are blocking the ventilation grilles of your devices.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information, technical support, or to inquire about replacement parts, please contact Monoprice customer service directly. Refer to your purchase documentation or the official Monoprice webเว็บไซต์สำหรับรายละเอียดการติดต่อ

โมโนไพรซ์ Webเว็บไซต์: www.monoprice.com