KEESON ETA23

KEESON Babycare TENS Elle TENS 2

คู่มือการใช้งาน

1. บทนำ

The KEESON Babycare TENS Elle TENS 2 is a Transcutaneous Electrical Nerve Stimulation (TENS) device designed to provide drug-free pain relief during labor and post-natal recovery. It features dual-channel operation, a contraction timer, and Opti-Max Technology to enhance pain management. This manual provides essential information for safe and effective use of your device.

2. ข้อมูลด้านความปลอดภัยและคำเตือน

Please read all instructions carefully before using the device. Failure to do so may result in injury or improper operation.

  • Do not use if you have a pacemaker or any other implanted electronic device.
  • Do not use if you have a heart condition or epilepsy.
  • Do not use on broken skin, open wounds, or areas of infection.
  • Do not use near or over the eyes, mouth, front of the neck, or across the chest.
  • Consult your doctor or midwife before use if you have any medical concerns.
  • เก็บให้พ้นจากมือเด็ก
  • This device is intended for external use only.
  • หากรู้สึกไม่สบายหรือมีอาการไม่พึงประสงค์ใด ๆ ให้หยุดใช้ทันที

3. เนื้อหาบรรจุภัณฑ์

Upon opening the box, please ensure all the following items are present:

  • 1 x Elle TENS 2 unit
  • 4 x Self-adhesive electrode pads (50x100mm)
  • 2 x Lead wires
  • แบตเตอรี่ AA 2 ก้อน (1.5V)
  • 1 x สายคล้องคอ
  • 1 x Instruction manual (this document)
Elle TENS 2 unit with electrode pads, lead wires, and batteries

Image 3.1: Contents of the Elle TENS 2 package, including the main unit, electrode pads, lead wires, and batteries.

4. อุปกรณ์โอเวอร์view

Familiarize yourself with the various parts and controls of your Elle TENS 2 unit:

Close-up of Elle TENS 2 front panel with screen and buttons

ภาพที่ 4.1: ด้านหน้า view of the Elle TENS 2 device, showing the display screen, control buttons, and branding.

  • จอแสดงผล LCD: Shows program mode, intensity levels, contraction timer, and battery status.
  • Power Button (Ⓘ): เปิด/ปิดอุปกรณ์
  • Contraction Timer Button: Starts and stops the contraction timer.
  • Opti-Max Button: Activates the Opti-Max function for enhanced pain relief.
  • CH1 Intensity Buttons (+/-): Adjusts intensity for Channel 1.
  • CH2 Intensity Buttons (+/-): Adjusts intensity for Channel 2.
  • ปุ่มโหมด: Cycles through available TENS programs.
  • ปุ่มบูสต์: Provides an immediate surge of intensity for acute pain during contractions.
  • CT History Button: Displays the history of recorded contractions.
  • Lead Wire Ports: Located at the top of the device for connecting electrode lead wires.
กลับ view of Elle TENS 2 showing battery compartment and neck cord attachment

ภาพที่ 4.2: ด้านหลัง view of the Elle TENS 2, illustrating the battery compartment and the attachment point for the neck cord.

5. การตั้งค่า

Follow these steps to prepare your Elle TENS 2 for use:

  1. ใส่แบตเตอรี่: Open the battery compartment on the back of the unit. Insert the two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  2. Connect Lead Wires: Plug the lead wires into the ports at the top of the Elle TENS 2 unit. Each lead wire has two pins that connect to two electrode pads.
Elle TENS 2 with lead wires connected to the top ports

Image 5.1: The Elle TENS 2 device with lead wires properly inserted into the top connection ports.

  1. Attach Electrode Pads: Connect the electrode pads to the pins on the lead wires. Ensure a secure connection.
  2. เตรียมผิว: Ensure the skin where electrodes will be placed is clean, dry, and free from oils or lotions.
  3. Electrode Placement for Labor: For labor pain relief, place the four electrode pads on your back as shown in the diagram below. Two pads should be placed on either side of the spine, just below the bra line, and the other two pads on either side of the spine, just above the sacrum (lower back). Ensure pads are not touching each other.
Elle TENS 2 connected to four electrode pads

Image 5.2: The Elle TENS 2 unit with all four electrode pads connected via lead wires, ready for application.

For post-natal pain relief, consult your healthcare professional for appropriate electrode placement.

6. คู่มือการใช้งาน

Using your Elle TENS 2 device:

  1. เปิด: Press and hold the Power button (Ⓘ) until the display illuminates. The device will start in a default program mode.
  2. ปรับความเข้มข้น: Use the CH1 (+/-) buttons to increase or decrease the intensity for Channel 1 (upper pads) and CH2 (+/-) buttons for Channel 2 (lower pads). Start with a low intensity and gradually increase until you feel a strong, comfortable tingling sensation. Avoid setting the intensity too high, which can cause discomfort.
  3. เลือกโหมด: Press the 'Mode' button to cycle through the available programs. The Elle TENS 2 typically offers different modes (e.g., Burst, Continuous) suitable for various stages of labor. Refer to your midwife's advice on which mode to use.
  4. Contraction Timer: Press the 'Contraction Timer' button at the start of a contraction. Press it again when the contraction ends. The display will show the duration of the contraction and the interval between contractions. Press 'CT History' to view a summary of recent contractions.
  5. ฟังก์ชันบูสต์: During a contraction, press the 'Boost' button for an immediate, stronger burst of stimulation to help manage acute pain. Release the button to return to the previous intensity.
  6. Opti-Max Technology: Press the 'Opti-Max' button to activate this feature, which provides an additional level of pain relief by automatically adjusting stimulation parameters.
  7. ปิด: Press and hold the Power button (Ⓘ) until the display turns off. Always turn off the device before removing electrodes.
Elle TENS 2 device held in a hand, showing its compact size

Image 6.1: The Elle TENS 2 unit comfortably held in a hand, demonstrating its ergonomic design and portability.

7. การบำรุงรักษา

Proper care will extend the life of your Elle TENS 2 device:

  • การทำความสะอาด: เช็ดอุปกรณ์ด้วยโฆษณาamp cloth and mild soap. Do not immerse the unit in water or use abrasive cleaners.
  • แผ่นอิเล็กโทรด: After each use, re-apply the protective film to the electrode pads and store them in a sealed bag to maintain their adhesive quality. Replace pads when they lose their stickiness or become damaged.
  • การเปลี่ยนแบตเตอรี่: When the battery indicator on the display shows low power, replace both AA batteries with new ones. Remove batteries if the device will not be used for an extended period.
  • พื้นที่จัดเก็บ: เก็บอุปกรณ์และอุปกรณ์เสริมไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป

8 การแก้ไขปัญหา

If you encounter issues with your Elle TENS 2, refer to the following table:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีความรู้สึกหรือมีความรู้สึกอ่อนมาก
  • แบตเตอรี่ต่ำ
  • Loose lead wire connection
  • แผ่นยึดติดไม่ดี
  • ความเข้มข้นต่ำเกินไป
  • เปลี่ยนแบตเตอรี่
  • Check lead wire connections
  • Ensure pads are firmly applied; replace if necessary
  • Increase intensity gradually
จอแสดงผลไม่ทำงาน
  • แบตเตอรี่แบบแบน
  • อุปกรณ์ไม่ได้เปิดอยู่
  • เปลี่ยนแบตเตอรี่
  • กดปุ่มเปิด/ปิดค้างไว้
แผ่นไม่ติด
  • Skin is oily/dirty
  • Pads are old/worn
  • ทำความสะอาดผิวให้สะอาดหมดจด
  • Replace with new electrode pads

หากปัญหายังคงมีอยู่หลังจากลองวิธีแก้ไขเหล่านี้แล้ว โปรดติดต่อฝ่ายสนับสนุนลูกค้า

9. ข้อมูลจำเพาะ

  • หมายเลขรุ่น: ETA23
  • แหล่งพลังงาน: แบตเตอรี่ AA 2 ก้อน (รวมอยู่ด้วย)
  • ช่องทางการรับชม: ช่องสัญญาณคู่
  • ขนาด : Approximately 1 x 1 x 1 cm (device only)
  • น้ำหนัก: Approximately 497 g (device only)
  • ผู้ผลิต: Body Clock Healthcare Ltd.
  • คุณสมบัติ: Contraction Timer, Opti-Max Technology, Boost button

10. การรับประกันและการสนับสนุน

Your KEESON Babycare TENS Elle TENS 2 device is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or to purchase replacement parts, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the manufacturer's official webเว็บไซต์.

เอกสารที่เกี่ยวข้อง - ETA23

พรีview Member's Mark RF400A Remote Control User Manual
User manual for the Member's Mark RF400A remote control, detailing button functions, technical specifications, and FCC/ISED compliance information.
พรีview คู่มือการใช้งานฟังก์ชัน MC232SC
เอกสารนี้ให้คำแนะนำการใช้งานและรายละเอียดการกำหนดค่าไฟฟ้าสำหรับกล่องควบคุม MC232SC ของบริษัท Keeson Technology Corporation Limited ครอบคลุมฟังก์ชันการทำงานของพอร์ตศีรษะ เท้า และส่วนเอว การควบคุมการสั่นสะเทือน และขั้นตอนการจับคู่
พรีview คำแนะนำฟังก์ชันกล่องควบคุม MC120PR
คำแนะนำโดยละเอียดสำหรับกล่องควบคุม MC120PR ครอบคลุมการกำหนดค่าไฟฟ้า การทดสอบฟังก์ชัน และการจับคู่บลูทูธ รวมถึงข้อมูลการปฏิบัติตามมาตรฐาน FCC และ ISED
พรีview คู่มือผู้ใช้รีโมทคอนโทรล TEMPUR-PEDIC RF396C
คู่มือผู้ใช้รีโมทคอนโทรล TEMPUR-PEDIC RF396C พร้อมรายละเอียดฟังก์ชันปุ่มต่างๆ สำหรับฐานเตียงปรับระดับได้ รวมถึงการล็อกเด็ก การนวด ตำแหน่งทีวี และอื่นๆ รวมถึงข้อมูลการปฏิบัติตามมาตรฐาน FCC และ ISED
พรีview คู่มือผู้ใช้ Keeson WF03D: คำแนะนำในการดาวน์โหลดแอปและการเชื่อมต่ออุปกรณ์
คู่มือผู้ใช้โดยละเอียดสำหรับหน่วยควบคุม Keeson WF03D ซึ่งแนะนำผู้ใช้ในการดาวน์โหลดแอป iOS เชื่อมต่ออุปกรณ์เตียงอัจฉริยะผ่าน Wi-Fi และฟังก์ชันการควบคุมอุปกรณ์พื้นฐาน
พรีview รีโมทคอนโทรล Keeson RF408A: คำแนะนำสำหรับผู้ใช้และข้อมูลด้านกฎระเบียบ
คำแนะนำโดยละเอียดสำหรับการใช้งานรีโมทคอนโทรล Keeson RF408A ครอบคลุมฟังก์ชันปุ่ม โหมดแสง และคำชี้แจงการปฏิบัติตามข้อกำหนด FCC และ ISED ที่จำเป็น