คู่มือการใช้งานอะแดปเตอร์สำหรับติดตั้งบนฐานรองเท้าแบบ Cold Shoe ของ SmallRig (รุ่น 2060)

1. บทนำ

This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.

2. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

• 2 x SmallRig Cold Shoe Mount Adapters
• 2 x 1/4"-20 Screws
• สกรู M4 จำนวน 2.5 ตัว
• 2 x Hex Spanners

Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.

3. การตั้งค่าและการติดตั้ง

The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.

3.1 Identifying Mounting Points

The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.

ภาพที่ 3.1: ด้านหลัง view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.

3.2 Attachment Procedure

1. Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
2. Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
3. Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
4. บันทึก: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.

Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.

4. คู่มือการใช้งาน

Once the cold shoe mount adapter is securely installed, you can attach various accessories.

4.1 การติดอุปกรณ์เสริม

1. Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
2. Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
3. The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.

Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.

ภาพที่ 4.2: อดีตample of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.

4.2 ความเข้ากันได้

This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Exampรวมถึง:

• ไมโครโฟน
• ไฟ LED
• External Flashes
• Small monitors (with appropriate cold shoe adapter)
• Magic Arms (with cold shoe base)
• Cold Shoe Handles

Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.

5. การบำรุงรักษา

To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:

• Keep the mount clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the mount to extreme temperatures or corrosive substances.
• Periodically check the tightness of the mounting screws to ensure a secure connection.

6 การแก้ไขปัญหา

6.1 Accessory Not Fitting Securely

• Ensure the accessory has a standard cold shoe base.
• Verify that the accessory is slid fully into the mount, past the anti-off bevels.
• Some accessories may have a locking mechanism that needs to be tightened after insertion.

6.2 Mount Not Attaching to Camera Accessory

• Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
• Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
• Tighten the screw firmly with the hex spanner.

6.3 ข้อจำกัดด้านความเข้ากันได้

This Cold Shoe Mount is ไม่ suitable for DJI gimbals and ไม่ for ZHIYUN gimbals.

7. ข้อมูลจำเพาะ

Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.

8. การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the official SmallRig webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ

Official SmallRig Webเว็บไซต์: www.smallrig.com