เทคอนชา 118756

Tekonsha T-One® T-Connector Harness (Model 118756) Instruction Manual

For Select Toyota C-HR Vehicles

1. บทนำ

This manual provides detailed instructions for the proper installation, operation, and maintenance of the Tekonsha T-One® T-Connector Harness, Model 118756. This product is designed to provide a 4-way flat trailer wiring connection for select Toyota C-HR vehicles, enabling trailer lighting functions without cutting or splicing vehicle wires.

2. ข้อมูลด้านความปลอดภัย

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:

Tekonsha T-One T-Connector Harness components laid out
Figure 1: All components included in the Tekonsha T-One T-Connector Harness kit. This image displays the main harness with its control module, various vehicle-specific connectors, a 4-way flat trailer connector, power wire with fuse, ground wire, and an assortment of zip ties and electrical connectors.
Tekonsha T-One T-Connector Harness product packaging
Figure 2: The retail packaging for the Tekonsha T-One T-Connector Harness, Model 118756. The box highlights key features such as "Easy to Install" and "No cutting, splicing or taping of vehicle wires."

4. การตั้งค่าและการติดตั้ง

The Tekonsha T-One® T-Connector Harness is designed for a "Plug & Play" installation, requiring no cutting, splicing, or taping of your vehicle's wires. The installation process typically involves accessing the vehicle's taillight wiring harness.

  1. เตรียมยานพาหนะ: ตรวจสอบให้แน่ใจว่ารถดับเครื่องแล้วและดึงเบรกมือไว้ ถอดขั้วลบของแบตเตอรี่รถยนต์ออก
  2. Access Taillight Wiring: Depending on your Toyota C-HR model, you may need to remove interior trim panels or access panels in the trunk or cargo area to reach the taillight wiring harness connectors. Refer to your vehicle's owner's manual for specific panel removal instructions.
  3. Locate Vehicle Harness: Identify the vehicle's taillight wiring harness connectors. These are typically located behind the taillight assemblies.
  4. เชื่อมต่อตัวเชื่อมต่อรูปตัว T: Unplug the vehicle's existing taillight harness connector. Insert the corresponding Tekonsha T-Connector into the vehicle's harness, ensuring a secure connection. Then, plug the vehicle's original harness into the other end of the Tekonsha T-Connector. Repeat this process for both sides of the vehicle if applicable.
  5. Mount Control Module: Find a secure, dry location within the vehicle's cargo area or behind the trim panels to mount the control module. Use the provided zip ties or double-sided tape (not included) to secure it, ensuring it is away from moving parts or areas prone to moisture.
  6. Connect Power Wire: Route the power wire from the control module to the vehicle's battery. This may involve routing it through the vehicle's interior and firewall. Connect the fuse holder in-line near the battery, but do not insert the fuse until all connections are complete. Connect the power wire to the positive terminal of the battery.
  7. ต่อสายดิน: Connect the white ground wire from the control module to a clean, unpainted metal surface on the vehicle's chassis using the provided ring terminal and a self-tapping screw. Ensure a good electrical ground.
  8. ตัวเชื่อมต่อแบบแบน 4 ทางสำหรับเส้นทาง: Route the 4-way flat connector to the exterior of the vehicle, typically near the trailer hitch. Secure it using zip ties, ensuring it is protected from road debris and heat.
  9. การตรวจสอบขั้นสุดท้าย: Reconnect the vehicle's battery. Insert the fuse into the fuse holder. Test all trailer light functions (turn signals, brake lights, running lights) with a trailer or a trailer light tester before reassembling any removed trim panels.

5. คู่มือการใช้งาน

Once installed, the Tekonsha T-One® T-Connector Harness provides a standard 4-way flat connector for your trailer. To operate:

6. การบำรุงรักษา

Minimal maintenance is required for the T-One® T-Connector Harness:

7 การแก้ไขปัญหา

If you experience issues with your trailer lights, consider the following troubleshooting steps:

If troubleshooting steps do not resolve the issue, contact Tekonsha customer support or a qualified automotive electrician.

8. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ยี่ห้อเทคอนชา
หมายเลขรุ่น118756
ประเภทขั้วต่อแบน 4 ทาง
เครื่องวัดสายไฟ16 Gauge Bonded Wire
Stop/Turn Circuit Capacity5 Amps
ความจุวงจรไฟท้าย7.5 Amps
วัสดุโพลีไวนิลคลอไรด์ (PVC)
ขนาดรายการ (ยาว x กว้าง x สูง)7 x 5 x 3.72 นิ้ว
น้ำหนักสินค้าประมาณ 1.96 ปอนด์
ยูพีซี016118106886

9. การรับประกันและการสนับสนุน

Tekonsha products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tekonsha website. For technical assistance or support, please contact Tekonsha customer service.

เทคอนชา Webเว็บไซต์: www.tekonsha.com

เอกสารที่เกี่ยวข้อง - 118756

พรีview คู่มือการติดตั้งคอนเนคเตอร์ Tekonsha T-One® สำหรับ Honda HR-V
คู่มือการติดตั้งแบบทีละขั้นตอนสำหรับตัวเชื่อมต่อ Tekonsha T-One® (118877-037) บนรถ Honda HR-V รวมถึงเครื่องมือ คำเตือนด้านความปลอดภัย และรายละเอียดการเดินสายไฟสำหรับการเชื่อมต่อรถพ่วงแบบแบน 4 ทาง
พรีview การติดตั้งสายไฟพ่วงรถพ่วง Tekonsha T-One สำหรับ Mercedes Sprinter และ Freightliner Sprinter
คู่มือการติดตั้งแบบทีละขั้นตอนสำหรับชุดสายไฟ Tekonsha T-One T-Connector (118876-037) สำหรับรถยนต์ Mercedes Sprinter และ Freightliner Sprinter ประกอบด้วยเครื่องมือที่จำเป็น คำเตือนด้านความปลอดภัย และคำแนะนำโดยละเอียดสำหรับการต่อชุดสายไฟเข้ากับระบบไฟท้ายและแบตเตอรี่ของรถยนต์
พรีview คู่มือการติดตั้งตัวเชื่อมต่อ Toyota Corolla Cross T-One®
คำแนะนำการติดตั้งโดยละเอียดสำหรับชุดสายไฟ Tekonsha T-One® Connector (หมายเลขชิ้นส่วน 118864-037) ใน Toyota Corolla Cross ครอบคลุมเครื่องมือ ความปลอดภัย และขั้นตอนการเดินสายไฟและการติดตั้งแบบทีละขั้นตอน
พรีview คู่มือการติดตั้งคอนเนคเตอร์ Tekonsha T-One® สำหรับ Lexus NX (รุ่น 118868)
คู่มือการติดตั้งแบบทีละขั้นตอนอย่างละเอียดสำหรับชุดสายไฟเชื่อมต่อรูปตัว T Tekonsha T-One® (รุ่น 118868) สำหรับรถยนต์ Lexus NX รวมถึงเครื่องมือที่จำเป็น คำเตือนด้านความปลอดภัย และขั้นตอนการเดินสายไฟ
พรีview คู่มือการติดตั้งชุดอุปกรณ์ครบชุดสำหรับรถ 7 ทาง Tekonsha สำหรับ Ford Bronco
คู่มือนี้ให้คำแนะนำการติดตั้งโดยละเอียดสำหรับชุดอุปกรณ์ครบชุด Tekonsha 7-Way Vehicle Kit ซึ่งออกแบบมาสำหรับรถ Ford Bronco รุ่นที่ติดตั้งไฟท้าย LED ครอบคลุมฮาร์ดแวร์มากกว่าviewเครื่องมือที่จำเป็น ขั้นตอนการติดตั้งทีละขั้นตอนสำหรับการเตรียมยานพาหนะ การเชื่อมต่อโมดูล การเดินสายสายรัด และการทำให้เสร็จสมบูรณ์ พร้อมด้วยคู่มือการแก้ไขปัญหา
พรีview คำแนะนำในการติดตั้งสายรัดลากจูง Ford Maverick
คู่มือทีละขั้นตอนสำหรับการติดตั้งสายรัดลากจูง 7 ทางของ Tekonsha บน Ford Maverick รวมถึงฮาร์ดแวร์viewเครื่องมือที่จำเป็น รายละเอียดการเดินสาย และการแก้ไขปัญหา