Daisy 901

Daisy Powerline 901 Air Rifle Kit User Manual

รุ่น : 901

การแนะนำ

This manual provides essential information for the safe and effective operation, maintenance, and care of your Daisy Powerline 901 Air Rifle Kit. Please read this manual thoroughly before using the product.

ข้อมูลด้านความปลอดภัยที่สำคัญ

คำเตือน: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wear appropriate eye protection when handling or operating this air rifle.

การปฏิเสธความรับผิดทางกฎหมาย: YOU MUST BE 18 YEARS OR OLDER TO BUY ANY AIR GUN OR AIR RIFLE IN OUR STORE. We do NOT and can NOT ship airguns or bb guns to New York City and its boroughs (Manhattan, Brooklyn, Bronx, Queens, Staten Island, these zip codes are: 100xx-104xx, 110xx, 112xx-114xx, 116xx), the city of Philadelphia, PA and Washington DC. Residents of Chicago, IL cannot buy CO2 powered rifles, pistols or revolvers directly from us. Residents of New Jersey can buy bb guns through a designated local gun store after acquiring an Airgun Permit.

Always treat every airgun as if it were loaded. Never point an airgun at anything you do not intend to shoot. Keep your finger off the trigger until ready to shoot. Be sure of your target and what is beyond it.

เนื้อหาแพ็คเกจ

Daisy Powerline 901 Air Rifle Kit including rifle, scope, safety glasses, BBs, pellets, and targets

Image: The Daisy Powerline 901 Air Rifle Kit, showing the black air rifle with an attached scope, yellow safety glasses, a tin of .177 caliber pellets, three containers of Daisy 350 count BBs, and two red ShatterBlast targets with black stakes.

Your Daisy Powerline 901 Air Rifle Kit includes the following components:

การตั้งค่า

1. Scope Installation

  1. Carefully unbox the 4x15 scope and mounting rings.
  2. Attach the scope rings to the dovetail rail on top of the rifle receiver. Ensure they are securely tightened but do not overtighten.
  3. Place the scope into the rings, ensuring the reticle is level. Secure the top halves of the rings.
  4. Adjust the scope's position for proper eye relief once mounted.

2. การตั้งค่าเป้าหมาย

คำแนะนำการใช้งาน

Loading BBs (Repeater Mode)

  1. Ensure the rifle is pointed in a safe direction.
  2. Locate the BB loading port on the side of the rifle.
  3. Open the loading port and pour up to 50 BBs into the reservoir.
  4. ปิดช่องเติมน้ำมันให้สนิท
  5. To load a BB into the chamber, pull the bolt handle fully to the rear and then push it forward until it locks.

Loading Pellets (Single Shot)

  1. Ensure the rifle is pointed in a safe direction.
  2. Pull the bolt handle fully to the rear.
  3. Carefully insert one .177 caliber pellet into the breech, ensuring the skirt of the pellet is facing the rear.
  4. Push the bolt handle forward until it locks, seating the pellet.

Pumping the Rifle

  1. With the rifle pointed in a safe direction, grasp the forearm pump handle.
  2. Pump the handle fully open and then fully closed. Repeat this action for 3 to 10 pumps. More pumps result in higher velocity. Do not exceed 10 pumps.

Firing the Rifle

  1. Ensure the safety is engaged (ON).
  2. Aim at your target, ensuring a clear backstop.
  3. Disengage the safety (OFF).
  4. Place your finger on the trigger and slowly squeeze to fire.

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
BBs/Pellets not loading or jammingImproper loading, bent pellets, or residue in breech.Ensure bolt is fully cycled. Use unbent pellets. Clean breech area.
Low velocity or inconsistent shotsInsufficient pumps, worn seals, or dirty barrel.Ensure 3-10 full pumps. Inspect for air leaks. Clean barrel.
Scope not holding zero or inaccurateLoose scope rings, faulty scope, or bent barrel.Tighten scope rings. If issues persist, consider replacing the scope or contacting support for barrel inspection.
Charging handle difficult to operateLack of lubrication or internal obstruction.Apply silicone lubricant to the charging handle and bolt mechanism. Check for any foreign objects.

ข้อมูลจำเพาะ

ข้อมูลการรับประกัน

The Daisy Powerline 901 Air Rifle Kit comes with a รับประกันสินค้า 1 ปี. For warranty claims or service, please retain your proof of purchase and contact Daisy customer support. This warranty covers manufacturing defects and workmanship under normal use.

การสนับสนุนลูกค้า

For further assistance, technical support, or to inquire about replacement parts, please visit the official Daisy Outdoor Products website or contact their customer service department. Always refer to your product model number (901) when seeking support.

Daisy Outdoor Products Official Webเว็บไซต์: www.daisy.com

เอกสารที่เกี่ยวข้อง - 901

พรีview Ръководство за POS Manager: Настройки и Функции
Подробно ръководство за работа със софтуера POS Manager, обхващащо настройки, конфигурация на фискално устройство, управление на артикули, оператори, плащания, данъци и отчети.
พรีview Протокол за комуникация между фискални устройства и персонален компютър
Този документ описва протокола за комуникация между фискални устройства (ФУ) и персонални компютри (PC), предоставяйки подробна информация за командите, съобщенията и флаговете за състоянието.
พรีview AIS ผ่าน WiFi ด้วยโมดูล DT-06: คู่มือการใช้งาน dAISy 2+
เรียนรู้วิธีเชื่อมต่อโมดูล WiFi DT-06 เข้ากับเครื่องรับ AIS dAISy 2+ เพื่อสตรีมข้อมูล AIS แบบไร้สายไปยังแอปนำทาง เช่น OpenCPN และ Navionics บนอุปกรณ์มือถือและคอมพิวเตอร์
พรีview Daisy H1000R 2D Wireless Barcode Scanner - High Performance & Versatile
Discover the Daisy H1000R, a high-performance 2D wireless barcode scanner. Featuring plug-and-play setup, 2000mAh battery, and compatibility with 1D/2D codes on screen and paper. Ideal for business, payment, and healthcare applications.
พรีview คู่มือผู้ใช้เครื่องสแกน Daisy 2D USB
คู่มือการใช้งานฉบับสมบูรณ์สำหรับเครื่องสแกนบาร์โค้ด 2 มิติ Daisy USB อธิบายรายละเอียดเกี่ยวกับการติดตั้ง การกำหนดค่า อินเทอร์เฟซการสื่อสาร โหมดการอ่าน การแก้ไขข้อมูล และการตั้งค่าระบบรหัสเพื่อการสแกนบาร์โค้ดอย่างมีประสิทธิภาพ
พรีview คู่มือผู้ใช้เครื่องสแกนบาร์โค้ด 2 มิติ Daisy: คู่มือการตั้งค่าและการใช้งาน
คู่มือผู้ใช้นี้ให้คำแนะนำและรายละเอียดการกำหนดค่าอย่างครบถ้วนสำหรับเครื่องสแกนบาร์โค้ด 2 มิติ Daisy ครอบคลุมการตั้งค่าเอาต์พุต การกำหนดค่าระบบ การแก้ไขข้อมูล และการปรับพารามิเตอร์บาร์โค้ด