การแนะนำ
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your FAAC 400 115V CBAC Standard Swing Gate Opener. Please read this manual thoroughly before beginning any installation or operation procedures. Retain this manual for future reference.
The FAAC 400 is a hydraulic gate operator designed for swing gates, suitable for various applications from residential to heavy industrial use. It features quiet operation, a key-protected manual release, and self-lubrication for extended life.
ข้อมูลด้านความปลอดภัย
คำเตือน: Improper installation or use can lead to serious injury or property damage. Always follow local safety codes and regulations.
- การติดตั้งจะต้องดำเนินการโดยบุคลากรที่มีคุณสมบัติเหมาะสม
- Ensure all power is disconnected before performing any maintenance or installation.
- Keep hands and clothing clear of the gate and operator during operation.
- Do not allow children to play near the gate or operate the controls.
- Regularly inspect the gate and operator for signs of wear or damage.
การติดตั้งและการตั้งค่า
The FAAC 400 operator is designed for swing gates up to 16 feet long and weighing up to 1,300 lbs. Proper gate preparation and mounting are crucial for optimal performance.
1. การตรวจสอบก่อนการติดตั้ง
- Verify the gate structure is sound and moves freely without obstruction.
- Ensure adequate space for the operator and its full range of motion.
- Confirm 115V AC power supply is available at the installation site.
2. Mounting the Operator
Mount the FAAC 400 operator securely to the gate post and gate leaf using appropriate hardware (not included). The exact mounting position will depend on the gate geometry and desired opening angle. Refer to the detailed mounting diagrams in the full installation guide (available from FAAC) for precise measurements.
Figure 1: The FAAC 400 115V CBAC Standard Swing Gate Opener. This image shows the elongated, silver-colored hydraulic arm of the gate opener with a black manual release mechanism visible on its side. The unit is designed to push and pull a gate open and closed.
3. การเชื่อมต่อไฟฟ้า
Connect the operator to the control board (sold separately) and the 115V AC power supply. All electrical wiring must comply with local electrical codes and be performed by a licensed electrician. Ensure proper grounding.
- Connect power leads to the control board's designated terminals.
- Connect motor wires from the operator to the control board.
- Install safety devices such as photocells and safety edges as required.
4. Initial Programming and Calibration
After physical installation and electrical connections, the control board will need to be programmed to recognize the gate's travel limits and operating parameters. Refer to the control board's specific instruction manual for detailed programming steps. This typically involves:
- Learning the open and close positions.
- Setting force and speed parameters.
- Configuring remote controls and other accessories.
คำแนะนำการใช้งาน
1. การทำงานมาตรฐาน
Once installed and programmed, the gate opener can be operated via a remote control, keypad, or other access control devices connected to the control board. Pressing the designated button will initiate the gate's opening or closing cycle.
- A single press typically opens a closed gate or closes an open gate.
- During operation, a second press may stop the gate, and a third press may reverse its direction, depending on the control board's programming.
2. Manual Release Procedure
In case of power failure or malfunction, the gate can be operated manually using the key-protected release mechanism on the operator.
- Locate the manual release mechanism on the operator (refer to Figure 1).
- Insert the provided key into the lock and turn it to unlock the mechanism.
- Engage the release lever or knob as instructed by the specific model's design (e.g., pull, twist).
- ตอนนี้สามารถเลื่อนประตูด้วยมือได้แล้ว
- To re-engage automatic operation, reverse the steps, ensuring the mechanism is fully locked.
สำคัญ: Always ensure the gate is secure when in manual mode to prevent unintended movement.
การซ่อมบำรุง
Regular maintenance ensures the longevity and reliable operation of your FAAC 400 gate opener. The unit features self-lubrication, reducing the need for frequent manual lubrication.
- รายเดือน: Visually inspect the operator and gate for any signs of wear, damage, or loose connections. Check that the gate moves freely and smoothly.
- รายไตรมาส: Test all safety devices (photocells, safety edges) to ensure they are functioning correctly. Clean any debris from the gate's path and around the operator.
- รายปี: Have a qualified technician inspect the hydraulic fluid levels and overall system performance.
บันทึก: Always disconnect power to the gate opener before performing any maintenance or inspection.
การแก้ไขปัญหา
This section addresses common issues you might encounter. For complex problems, contact a qualified technician.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Gate does not respond to commands. | No power; remote control battery dead; safety device activated; control board issue. | Check power supply; replace remote battery; clear safety device path; consult control board manual. |
| Gate opens partially or stops unexpectedly. | Obstruction in gate path; low hydraulic fluid; motor issue; programming error. | Remove obstruction; check hydraulic fluid (qualified technician); inspect motor; re-calibrate limits. |
| Manual release not working. | Key not fully inserted/turned; mechanism jammed. | Ensure key is fully engaged and turned; gently try to free mechanism; do not force. |
| เสียงผิดปกติระหว่างการทำงาน | Worn components; low hydraulic fluid; misalignment. | Inspect for wear; check fluid levels; verify alignment; contact technician. |
ข้อมูลจำเพาะ
- แบบอย่าง: FAAC 400 115V CBAC Standard
- หมายเลขชิ้นส่วน: 104201125
- ประเภทประตู : ประตูสวิง
- ความยาวประตูสูงสุด: 16 ฟุต
- Max Gate Weight: 1,300 ปอนด์
- แหล่งพลังงาน: 115V AC, Corded Electric
- การดำเนินการ: ไฮดรอลิก
- คุณสมบัติหลัก: Hydraulic lock (open/closed), quiet operation, self-lubricating, key-protected manual release.
- ASIN: B074CHR3JJ
การรับประกันและการสนับสนุน
FAAC products are manufactured to high standards and typically come with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official FAAC webเว็บไซต์สำหรับข้อกำหนดและเงื่อนไขการรับประกันโดยเฉพาะ
For technical support, spare parts, or service, please contact your authorized FAAC dealer or visit the official FAAC support portal. Ensure you have your model number (FAAC 400) and serial number (if applicable) ready when contacting support.
Note: This manual provides general guidance. Always consult the full, detailed installation and user manual provided by FAAC for comprehensive instructions and safety warnings.
