Paradox PMD2P/86 Supervised Analog Passive Infrared Detector User Manual

การแนะนำ

The Paradox PMD2P/86 is a high-performance, supervised analog passive infrared (PIR) detector designed for reliable motion detection in security systems. This device features single optics, providing an 11x11 meter detection range with an 88.5° angle. It incorporates advanced technology for enhanced security and user convenience.

คุณสมบัติที่สำคัญ ได้แก่:

• Patented Signal Processing: Utilizes pulse count processing for accurate detection.
• การชดเชยอุณหภูมิอัตโนมัติ: Ensures consistent performance across varying environmental temperatures.
• Energy Saving Transmission Block: After two detections within 5 minutes, transmission is blocked for 3 minutes to conserve battery life.
• High Pet Immunity: Designed to ignore pets weighing up to 18 kg, reducing false alarms.
• Tamper and Anti-Deterioration Switches: Provides additional security against unauthorized access or damage.
• แหล่งจ่ายไฟ: Supplied with 3 AA alkaline batteries for immediate use.

ภาพนี้แสดงด้านหน้า view of the Paradox PMD2P/86 detector, highlighting its compact design and lens.

การติดตั้งและการตั้งค่า

1. การแกะกล่องและการติดตั้งแบตเตอรี่

Carefully remove the detector from its packaging. The PMD2P/86 is supplied with 3 AA alkaline batteries. Open the detector casing according to the instructions provided in the full manual (not included here) and insert the batteries, ensuring correct polarity. Close the casinก. อย่างปลอดภัย

2. ตำแหน่งการติดตั้ง

Choose a mounting location that provides optimal coverage of the area to be protected. Consider the following:

• ความสูง: Typically mounted at 2.1 to 2.7 meters (7 to 9 feet) above the floor.
• ระยะการตรวจจับ: The detector offers an 11x11 meter range with an 88.5° angle. Position it to cover entry points and valuable areas.
• ภูมิคุ้มกันสัตว์เลี้ยง: For optimal pet immunity (up to 18 kg), ensure the detector is mounted at the recommended height and that pets cannot climb onto objects within the detection zone that would place them at a higher level.
• การหลีกเลี่ยง: Do not aim the detector directly at heat sources, air vents, or windows that receive direct sunlight, as these can cause false alarms.

3 การติดตั้งเครื่องตรวจจับ

Use the provided mounting hardware to securely attach the detector to a wall or corner. Ensure the tamper switch is properly engaged once the detector is mounted to prevent unauthorized removal.

4. การรวมระบบ

The PMD2P/86 is a supervised analog detector. Refer to your security system's control panel manual for instructions on how to enroll or integrate new wireless devices. The detector will communicate with the control panel at 868MHz.

คำแนะนำการใช้งาน

หลักการตรวจจับ

The Paradox PMD2P/86 detects motion by sensing changes in infrared energy (body heat) within its detection zone. When a moving heat source, such as a person, crosses the detection pattern, the detector triggers an alarm signal to the connected security system.

ภูมิคุ้มกันสัตว์เลี้ยง

The advanced design of the PMD2P/86 provides high immunity to pets weighing up to 18 kg. This means that normal movement of small to medium-sized pets within the protected area should not trigger an alarm. For best performance, ensure pets cannot get too close to the detector or climb onto furniture that would place them in the upper detection zones.

โหมดประหยัดพลังงาน

To extend battery life, the detector incorporates an energy-saving feature. After two detections occur within a 5-minute period, the detector will enter a transmission block mode for 3 minutes. During this time, it will continue to detect motion but will not transmit further signals to the control panel. This prevents excessive battery drain in high-traffic areas.

การกำกับดูแล

As a supervised detector, the PMD2P/86 periodically sends a supervisory signal to the control panel. This confirms that the detector is operational and within communication range. If the control panel does not receive a supervisory signal within a set timeframe, it will indicate a trouble condition.

การซ่อมบำรุง

การเปลี่ยนแบตเตอรี่

The detector is powered by 3 AA alkaline batteries. When the battery level is low, the detector will send a low battery signal to your security system's control panel. Replace all three batteries promptly with new, high-quality alkaline AA batteries. Always ensure correct polarity during installation.

การทำความสะอาด

ทำความสะอาดเลนส์ของตัวตรวจจับเป็นระยะ และ...asing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit, as this can damage the optics or electronic components.

การทดสอบเป็นประจำ

It is recommended to test the detector's functionality periodically (e.g., once a month) to ensure it is operating correctly. Refer to your security system's manual for instructions on how to perform a walk test or system test.

การแก้ไขปัญหา

No Detection / Detector Not Responding

• ตรวจสอบแบตเตอรี่: ตรวจสอบให้แน่ใจว่าได้ติดตั้งแบตเตอรี่อย่างถูกต้องและแบตเตอรี่ไม่หมด หากจำเป็นให้เปลี่ยนแบตเตอรี่ใหม่
• สิ่งกีดขวาง: Verify that there are no physical obstructions blocking the detector's field of view.
• ความสูงในการติดตั้ง: Confirm the detector is mounted at the recommended height.
• ช่วงสัญญาณ: Ensure the detector is within the wireless communication range of the control panel. Relocate if necessary.
• การลงทะเบียน: Confirm the detector is properly enrolled with the security system.

สัญญาณเตือนภัยเท็จ

• แหล่งความร้อน: Check for heat sources (heaters, direct sunlight, air vents) within the detection zone. Relocate the detector or adjust its aim.
• สัตว์เลี้ยง: Ensure pets are not exceeding the 18 kg immunity limit or climbing onto objects that place them higher in the detection zone.
• ร่าง: Strong drafts can sometimes cause false alarms. Seal windows or doors if this is a factor.
• การสั่นสะเทือน: Excessive vibrations near the detector can sometimes cause issues.

การบ่งชี้แบตเตอรี่ต่ำ

If your control panel indicates a low battery for the PMD2P/86, replace all three AA alkaline batteries immediately. Do not mix old and new batteries.

ข้อมูลจำเพาะทางเทคนิค

การรับประกันและการสนับสนุน

For specific warranty information, please refer to the documentation provided with your purchase or contact your authorized Paradox dealer or installer. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

If you encounter any issues that cannot be resolved using the troubleshooting guide, or require technical assistance, please contact your security system installer or Paradox customer support. Ensure you have your product model number (PMD2P/86) and purchase details available when seeking support.