VILTROX JY-710-C1 Wireless LCD Interval Timer Remote Control Instruction Manual

การแนะนำ

The VILTROX JY-710-C1 is a versatile wireless LCD interval timer and shutter release remote control designed for various Canon cameras. This device enables precise control over camera shutter functions, including single shot, continuous shooting, Bulb mode, customized delay, and timed interval shooting. It is particularly useful for specialized photography such as capturing starry skies, night views, or time-lapse sequences. The remote features low power consumption and a clear LCD display for monitoring settings and timer plans.

Image: The VILTROX JY-710-C1 wireless remote control and its receiver unit.

คุณสมบัติผลิตภัณฑ์

• การทำงานแบบไร้สาย: Provides flexibility and reduces camera shake.
• Multi-functional Timer: Supports Delay/Self Timer, Interval Timer, Bulb/Long Exposure, and Exposure Count modes.
• จอแสดงผล LCD: Clear screen for easy setting and monitoring of timer parameters.
• การใช้พลังงานต่ำ: Designed for extended use.
• ลั่นชัตเตอร์: Functions as a standard wired or wireless shutter release.

เนื้อหาแพ็คเกจ

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

• Timer Remote Control x1
• ตัวรับ x1
• Shutter Release Cable x1
• English Instruction Manual x1

ความเข้ากันได้

The VILTROX JY-710-C1 is compatible with the following Canon EOS camera models:

• EOS 80D, 77D, 70D, 60D, 60Da
• EOS 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D
• EOS 200D, 100D, 1300D, 1200D, 1100D, 1000D
• EOS M5, M6

การตั้งค่า

1. การติดตั้งแบตเตอรี่

The remote control and receiver require batteries (not included). Open the battery compartment on the back of both units and insert the specified battery type, ensuring correct polarity. Close the compartments securely.

2. Connecting the Receiver to the Camera

1. Locate the remote control terminal on your camera. This is typically a small port on the side of the camera body.
2. Connect one end of the provided shutter release cable to the receiver unit.
3. Connect the other end of the shutter release cable to your camera's remote control terminal.
4. The receiver can be mounted on the camera's hot shoe or placed nearby.

Image: Demonstrates connecting the receiver unit to the camera's remote port.

3. Pairing and Channel Setting

Ensure both the remote control and receiver are powered on. If necessary, set both units to the same channel to establish a wireless connection. Refer to the specific instructions on the device's LCD for channel selection, usually involving a 'CH' setting.

Image: The remote control being used while connected to a camera on a tripod.

คำแนะนำการใช้งาน

การควบคุมทั่วไป

• ปุ่ม ตลท.: Used to confirm selections and enter settings menus.
• ปุ่มทิศทาง: เลือกตัวเลือกในเมนูและปรับค่าต่างๆ
• ปุ่มล็อค: ป้องกันการเปลี่ยนแปลงการตั้งค่าโดยไม่ได้ตั้งใจ
• ปุ่มเริ่ม/หยุดตัวจับเวลา: Initiates or halts the timer sequence.
• ปุ่มชัตเตอร์: Functions as a standard two-stage shutter button (half-press for focus, full-press for shutter).

Delay / Self Timer (DELAY)

This function operates similarly to your camera's self-timer. You can set a delay period in 1-second increments, up to a maximum of 99 hours, 99 minutes, and 99 seconds. After the delay, the shutter will be released.

Interval Timer (INTVL)

The Interval Timer allows you to set a specific time period between exposures, up to 100 hours. For example, if set to 10 minutes, an exposure will be taken every 10 minutes until the set exposure count is reached or manually stopped. This is ideal for time-lapse photography.

BULB / Long Exposure (LONG)

This mode enables long exposures, allowing the shutter to remain open for an extended duration, up to 100 hours. This is essential for low-light photography or capturing light trails.

Exposure Count (N)

The Exposure Count setting allows you to specify the total number of exposures to be taken in a sequence, up to 399 times. For instance, if set to 30, the device will trigger the shutter 30 times according to the other timer settings.

การซ่อมบำรุง

• Keep the device clean and dry. Use a soft, dry cloth to wipe surfaces.
• หลีกเลี่ยงการให้อุปกรณ์สัมผัสกับอุณหภูมิ ความชื้น หรือแสงแดดโดยตรง
• ถอดแบตเตอรี่ออกหากจะไม่ได้ใช้งานอุปกรณ์เป็นเวลานานเพื่อป้องกันการรั่วไหล
• Do not attempt to disassemble or repair the unit yourself, as this may void the warranty and cause damage.

การแก้ไขปัญหา

• อุปกรณ์ไม่เปิดเครื่อง: ตรวจสอบการติดตั้งแบตเตอรี่และให้แน่ใจว่าแบตเตอรี่ยังใหม่
• รีโมตไม่เปิดใช้งานกล้อง:
  • Ensure the receiver is correctly connected to the camera's remote port.
  • Verify that both the remote and receiver are set to the same channel.
  • Check camera settings to ensure it is ready to accept remote triggers.
  • Confirm batteries in both units are charged.
• ฟังก์ชันจับเวลาทำงานไม่เป็นไปตามที่คาดไว้: Double-check all timer settings (DELAY, INTVL, LONG, N) on the LCD display. Ensure the TIMER START/STOP button has been pressed.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the documentation included with your purchase or contact VILTROX customer service directly. Keep your proof of purchase for any warranty claims.