Hager ADC810H Residual Current Circuit Breaker with Overcurrent Protection (RCBO) User Manual

1. บทนำ

The Hager ADC810H is a compact and reliable Residual Current Circuit Breaker with Overcurrent Protection (RCBO), designed for the protection of electrical installations against both overcurrents (overload and short-circuit) and earth leakage currents. This device is a bipolar 1P+N unit, suitable for single-phase systems, ensuring enhanced safety and operational flexibility. Its design facilitates easy installation in industrial and domestic environments, providing precise monitoring of differential currents.

2. คำแนะนำด้านความปลอดภัย

WARNING: Electrical work should only be performed by qualified and authorized personnel. Failure to follow these instructions can result in serious injury or death.

• Always disconnect the main power supply before installing, maintaining, or troubleshooting the device.
• ตรวจสอบให้แน่ใจว่าระบบไฟฟ้ามีการต่อสายดินอย่างถูกต้อง
• Verify that the device ratings (voltage, current, breaking capacity) match the requirements of your electrical installation.
• ห้ามใช้งานอุปกรณ์หากพบว่าได้รับความเสียหาย
• Regularly test the residual current function using the test button.

3. สินค้าหมดview

The Hager ADC810H RCBO integrates both overcurrent and residual current protection in a single compact unit. It features a robust housing and clear markings for easy identification and connection.

ภาพนี้แสดงด้านหน้า view of the Hager ADC810H Residual Current Circuit Breaker with Overcurrent Protection (RCBO). Visible are the toggle switch for manual operation, the test button, and the connection terminals for phase and neutral conductors.

ส่วนประกอบที่สำคัญ ได้แก่:

• สวิตช์สลับ: For manual ON/OFF operation and indication of trip status.
• ปุ่มทดสอบ: Used to periodically test the residual current tripping mechanism.
• ขั้วต่อการเชื่อมต่อ: Clearly marked for phase (L) and neutral (N) input and output.
• DIN Rail Mounting Clip: For secure installation on a DIN rail.

4. การติดตั้ง

The Hager ADC810H RCBO is designed for DIN rail mounting. Follow these steps for safe and correct installation:

1. การตัดการเชื่อมต่อไฟฟ้า: Ensure the main power supply to the installation is completely disconnected and secured against accidental re-connection.
2. การติดตั้ง: Clip the RCBO onto the DIN rail in the consumer unit or distribution board. Ensure it is securely seated.
3. Wiring - Input: Connect the incoming phase (L) and neutral (N) conductors to the upper terminals of the RCBO. Ensure correct polarity and tight connections.
4. Wiring - Output: Connect the outgoing phase (L) and neutral (N) conductors to the lower terminals of the RCBO, leading to the protected circuit. Ensure correct polarity and tight connections.
5. แรงบิด: Tighten all terminal screws to the manufacturer's specified torque to prevent loose connections and overheating.
6. การตรวจสอบ: Double-check all connections for correctness and security before restoring power.

5. การดำเนินการ

The RCBO operates automatically to protect against electrical faults. Manual operation is also possible:

• การเปิดเครื่อง: ดันสวิตช์ขึ้นไปที่ตำแหน่ง 'เปิด'
• ปิด: กดสวิตช์ลงไปที่ตำแหน่ง 'ปิด'
• ระบบตัดวงจรอัตโนมัติ: In the event of an overcurrent (overload or short-circuit) or an earth leakage current exceeding 30mA, the RCBO will automatically trip, moving the toggle switch to the 'OFF' or intermediate position.
• ฟังก์ชั่นการทดสอบ: Press the 'T' (Test) button periodically (e.g., monthly) to verify the residual current tripping mechanism. The RCBO should trip immediately. If it does not trip, the device may be faulty and requires replacement.

6. การบำรุงรักษา

The Hager ADC810H RCBO requires minimal maintenance, but regular checks are essential for continued safety and performance:

• การตรวจสอบภาพ: ตรวจสอบอุปกรณ์เป็นระยะเพื่อดูว่ามีร่องรอยความเสียหายทางกายภาพ การเปลี่ยนสี หรือการเชื่อมต่อหลวมหรือไม่
• ทดสอบการทำงานของปุ่ม: Perform the test button operation monthly as described in the 'Operation' section.
• การทำความสะอาด: If necessary, clean the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• การตรวจสอบอย่างมืออาชีพ: It is recommended to have the entire electrical installation, including protective devices, inspected by a qualified electrician at regular intervals as per local regulations.

7 การแก้ไขปัญหา

If the RCBO trips unexpectedly or fails to operate correctly, consider the following:

• RCBO Trips Immediately After Reset:
  • สาเหตุที่เป็นไปได้: Persistent earth fault or short-circuit in the protected circuit.
  • สารละลาย: Disconnect all loads from the circuit. If the RCBO still trips, there is a fault in the fixed wiring. If it holds, reconnect loads one by one to identify the faulty appliance. Consult a qualified electrician.
• RCBO Trips Intermittently:
  • สาเหตุที่เป็นไปได้: Intermittent earth fault, overloaded circuit, or faulty appliance.
  • สารละลาย: Reduce the load on the circuit. Check appliances for intermittent faults.
• RCBO Does Not Trip When Test Button is Pressed:
  • สาเหตุที่เป็นไปได้: Faulty RCBO.
  • สารละลาย: The device is not providing residual current protection and must be replaced immediately by a qualified electrician.
• No Power to Circuit, RCBO is ON:
  • สาเหตุที่เป็นไปได้: Loose connection, fault upstream (e.g., main breaker tripped), or internal device failure.
  • สารละลาย: Check all connections. Verify power supply to the RCBO. If issues persist, consult a qualified electrician.

8. ข้อมูลจำเพาะทางเทคนิค

9. ข้อมูลการรับประกัน

Hager products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official Hager website or contact your local supplier for detailed warranty information applicable to your purchase. Keep your proof of purchase for warranty claims.

10. การสนับสนุนและการติดต่อ

For technical assistance, product inquiries, or support, please contact Hager customer service or your authorized Hager distributor. You can typically find contact information on the official Hager website or on the product packaging. When contacting support, please have your product model number (ADC810H) and any relevant purchase details ready.

Hager Official Webเว็บไซต์: www.hager.com