คู่มือการใช้งานที่ยึดโต๊ะในรถยนต์แบบดูดติดกระจก BYTECH

1. บทนำ

Thank you for choosing the BYTECH Suction Car Table Mount. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device mount. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. สินค้าหมดview

The BYTECH Suction Car Table Mount is designed to securely hold smartphones and tablets in various environments, including vehicles and on flat surfaces. It features a strong suction cup for stable attachment and an adjustable holder for universal compatibility.

รูปที่ 1: Bytech Suction Car Table Mount. This image displays the Bytech Suction Car Table Mount. It features a large suction cup base, an adjustable arm, and a universal holder designed to securely grip a tablet or smartphone. The device shown in the holder is a tablet displaying a blue digital interface.

3. คำแนะนำในการตั้งค่า

1. เลือกพื้นผิว: Select a clean, flat, and smooth surface for mounting. Ensure the surface is free from dust, grease, or moisture for optimal suction.
2. ทำความสะอาดพื้นผิว: Wipe the chosen surface with a clean cloth to remove any debris.
3. ติดถ้วยดูด: Press the suction cup firmly against the clean surface. While maintaining pressure, push down the lever or twist the locking mechanism (if present) on the suction cup base to create a vacuum seal.
4. ปรับแขน: Loosen the adjustment knobs on the mount's arm to position the device holder at your desired angle and orientation. Tighten the knobs securely once the position is set.
5. เสียบอุปกรณ์ของคุณ: Expand the adjustable clamps of the device holder and carefully place your smartphone or tablet into the holder. Ensure the device is securely gripped by the clamps.

4. คู่มือการใช้งาน

• ความเข้ากันได้ของอุปกรณ์: The mount is designed for universal compatibility with most smartphones and tablets. Ensure your device fits within the adjustable clamps.
• การปรับมุม: The mount features an adjustable arm and ball joint for flexible viewing angles. Loosen the respective knobs, adjust the angle, and then tighten to secure.
• การหมุน: The device holder can typically rotate 360 degrees. Adjust to portrait or landscape mode as needed.
• ตำแหน่งที่ปลอดภัย: Always ensure your device is firmly seated in the holder before driving or leaving it unattended.

5. การบำรุงรักษา

• การทำความสะอาด: ใช้แบบนุ่มๆamp cloth to clean the mount. Avoid abrasive cleaners or solvents that may damage the material.
• การดูแลถ้วยดูด: If the suction cup loses its grip, wash it with warm, soapy water, rinse thoroughly, and let it air dry. This can restore its adhesive properties.
• พื้นที่จัดเก็บ: เมื่อไม่ได้ใช้งานเป็นเวลานาน ให้ถอดฐานยึดออกและเก็บไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรง

6 การแก้ไขปัญหา

• Mount Not Sticking:
  • Ensure the mounting surface is clean, dry, and smooth.
  • Press the suction cup firmly and engage the locking mechanism completely.
  • Clean the suction cup as described in the Maintenance section.
• Device Not Fitting Securely:
  • Verify that your device's dimensions are within the adjustable range of the holder.
  • ให้แน่ใจว่า clamps are fully extended and then tightened around the device.
• Mount is Loose/Wobbly:
  • Check all adjustment knobs and ensure they are tightened securely.
  • Re-attach the suction cup if it appears to have lost its seal.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the product packaging or contact Bytech customer service directly. Contact details can typically be found on the manufacturer's official webไซต์หรือเอกสารประกอบที่รวมอยู่