Datalogic 90G000008 RS-232 Cable

1. บทนำ

This manual provides essential information for the proper setup, operation, and maintenance of your Datalogic 90G000008 RS-232 cable. This cable is designed for reliable serial data communication between compatible devices. It features a 9-pin female D-sub connector, a straight cable configuration, and is approximately 6 feet (1.8 meters) in length. Please read these instructions carefully before use.

2. การตั้งค่า

Follow these steps to correctly connect your Datalogic 90G000008 RS-232 cable:

1. ระบุตัวเชื่อมต่อ: Locate the 9-pin female D-sub connector on the Datalogic 90G000008 cable. This connector is designed to mate with a male RS-232 serial port on your host device (e.g., computer, industrial controller).
2. เชื่อมต่อกับอุปกรณ์: Carefully align the 9-pin female connector of the cable with the male RS-232 port on your device. Gently push the connector in until it is fully seated.
3. การเชื่อมต่อที่ปลอดภัย: Tighten the thumbscrews on the cable connector to secure it to the device's port. This prevents accidental disconnection and ensures a stable connection.
4. ความต้องการแหล่งจ่ายไฟภายนอก: Note that the Datalogic 90G000008 cable requires external power for operation. Ensure that the connected devices are powered on or that the necessary external power supply is connected to the relevant device as per its own instructions. This cable facilitates data transfer, but the devices themselves must be powered.
5. Connect Other End: Connect the other end of the cable to your peripheral device (e.g., scanner, printer, modem) that utilizes an RS-232 serial interface. Ensure this connection is also secure.

This image shows the 9-pin female D-sub connector of the Datalogic 90G000008 RS-232 cable. This connector is designed to interface with a male RS-232 port on compatible devices.

3. คู่มือการใช้งาน

Once the Datalogic 90G000008 RS-232 cable is securely connected to both your host and peripheral devices, follow these general operating guidelines:

• เปิดอุปกรณ์: Ensure both the host device and the peripheral device are powered on and functioning correctly.
• การกำหนดค่าซอฟต์แวร์: Install any necessary drivers or software on your host device as required by the peripheral device. Configure the serial port settings (e.g., baud rate, data bits, parity, stop bits, flow control) in your operating system or application to match those of the peripheral device. Incorrect settings will prevent communication.
• การส่งผ่านข้อมูล: Initiate data transfer through your application or terminal software. The cable will facilitate the serial communication between the connected devices.
• การติดตาม: Monitor the communication for any errors or unexpected behavior. Refer to the documentation of your host and peripheral devices for specific communication protocols and troubleshooting steps.

4. การบำรุงรักษา

Proper care and maintenance will extend the lifespan of your Datalogic 90G000008 RS-232 cable:

• การทำความสะอาด: Keep the cable and connectors clean. Use a soft, dry cloth to wipe away dust and debris. Avoid using harsh chemicals or abrasive materials.
• พื้นที่จัดเก็บ: When not in use, store the cable in a clean, dry environment. Avoid extreme temperatures and direct sunlight.
• การจัดการ: Do not bend the cable sharply or place heavy objects on it, as this can damage the internal wires. Always grasp the connector housing when plugging or unplugging, not the cable itself.
• การตรวจสอบ: ตรวจสอบสายเคเบิลและขั้วต่อเป็นระยะเพื่อดูว่ามีร่องรอยการสึกหรอ ฉีกขาด หรือเสียหายหรือไม่ หากพบความเสียหาย ให้หยุดใช้งานและเปลี่ยนสายเคเบิลใหม่

5 การแก้ไขปัญหา

If you encounter issues with your Datalogic 90G000008 RS-232 cable, consider the following troubleshooting steps:

• ไม่มีการสื่อสาร:
  • Ensure all cable connections are secure and fully seated.
  • Verify that both the host and peripheral devices are powered on.
  • Check that the serial port settings (baud rate, data bits, parity, stop bits, flow control) on your host device match those of the peripheral device.
  • Confirm that the correct drivers are installed for your peripheral device.
  • Test the cable with another known working device or use a different serial cable if available to isolate the issue.
• การเชื่อมต่อไม่ต่อเนื่อง:
  • Ensure the thumbscrews on the connectors are tightened.
  • ตรวจสอบความเสียหายทางกายภาพของสายเคเบิลหรือขั้วต่อ
  • Verify that there is no electromagnetic interference from other electronic devices nearby.
• ไม่รู้จักอุปกรณ์:
  • Confirm that the device is compatible with an RS-232 serial connection.
  • Refer to the peripheral device's manual for specific setup and driver installation instructions.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

For information regarding warranty coverage, technical support, or service for your Datalogic 90G000008 RS-232 cable, please refer to the official Datalogic website or contact Datalogic customer support directly. Keep your purchase receipt for warranty claims.