เลอกรองด์ 191510

Legrand 191510 Plexo Recessed Switch User Manual

1. บทนำ

This manual provides essential information for the safe and correct installation, operation, and maintenance of the Legrand 191510 Plexo Recessed Switch. Please read these instructions thoroughly before beginning any work.

1.1 ข้อมูลด้านความปลอดภัย

  • การติดตั้งจะต้องดำเนินการโดยช่างไฟฟ้าที่มีคุณสมบัติตามมาตรฐานไฟฟ้าท้องถิ่นและระดับชาติทั้งหมด
  • ควรตัดกระแสไฟที่เบรกเกอร์หลักทุกครั้งก่อนติดตั้งหรือซ่อมบำรุงสวิตช์
  • Do not use the switch if it appears damaged.
  • ตรวจสอบให้แน่ใจว่าได้ต่อสายดินอย่างถูกต้องในจุดที่จำเป็น
  • The switch is designed for recessed installation and offers waterproof protection (IP54).

1.2 ผลิตภัณฑ์เกินview

The Legrand 191510 Plexo Recessed Switch is a grey, waterproof switch designed for environments requiring protection against dust and water, such as outdoor areas, basements, and garages. It features a robust design for recessed installation and includes a box with upper and lower membranes for pipe inlet up to 25 mm, facilitating a secure and sealed cable entry.

ด้านหน้า view of the Legrand Plexo Recessed Switch, grey, showing the push button and IP55 rating.

รูปที่ 1 : ด้านหน้า view of the Legrand 191510 Plexo Recessed Switch.

2. คำแนะนำในการติดตั้ง

2.1 เครื่องมือที่จำเป็น

  • ไขควง (ปากแฉกและปากแบน)
  • ระบำลวด
  • เล่มที่tagผู้ทดสอบอิเล็กทรอนิกส์
  • Drill (if creating a new recess)
  • สายวัด

2.2 Mounting the Switch Box

  1. ตรวจสอบให้แน่ใจว่าได้ตัดกระแสไฟที่เบรกเกอร์หลักแล้ว
  2. Prepare the recess in the wall according to the switch dimensions (approximately 8 x 8 x 5.5 cm).
  3. Identify the desired cable entry point(s) on the switch box (upper or lower membrane). Carefully pierce the membrane to allow cable passage.
  4. Insert the electrical cables through the prepared membrane(s).
  5. Secure the switch box into the recess using appropriate fasteners. The joint joints between the mechanism and the wall facilitate adjustment on various surfaces.
หลัง view of the Legrand Plexo Recessed Switch showing the mounting points and membrane for cable entry, with an installation diagram.

รูปที่ 2: ด้านหลัง view of the switch box with cable entry membranes and mounting points.

2.3 การต่อสายไฟสวิตช์

  1. Strip approximately 13mm of insulation from the ends of the electrical wires.
  2. Connect the wires to the appropriate terminals on the switch mechanism. Refer to the wiring diagram usually found on the product or packaging. For a 1-way circuit, connect the live input to one terminal and the switched live output to the other.
  3. ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดแน่นหนาและปลอดภัย
ภาพระยะใกล้ view of the wiring terminals inside the Legrand Plexo Recessed Switch, indicating connection points.

รูปที่ 3: รายละเอียด view of the wiring terminals.

2.4 Assembling the Switch Mechanism and Cover

  1. Carefully position the wired switch mechanism into the mounted switch box.
  2. Ensure the mechanism is seated correctly and securely within the box.
ภายใน view of the Legrand Plexo Recessed Switch mechanism, showing the electrical contacts and housing.

Figure 4: Internal mechanism of the switch.

  1. Attach the grey front plate to the switch mechanism, ensuring it clicks into place and forms a tight seal for waterproof protection.
Legrand Plexo Recessed Switch with the grey front plate detached, illustrating how it connects to the internal mechanism.

Figure 5: Attaching the front plate to the switch mechanism.

  1. Once fully assembled, restore power at the main circuit breaker.

3. การดำเนินการ

3.1 ฟังก์ชั่นพื้นฐาน

The Legrand 191510 Plexo Recessed Switch operates as an ON-ON-OFF push-button switch. Pressing the button will toggle the connected electrical circuit between its ON and OFF states. The switch has 3 positions, allowing for flexible control of the connected load.

4. การบำรุงรักษา

4.1 การทำความสะอาด

To clean the switch, wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive water, as this may damage the finish or compromise the waterproof seal.

4.2 การตรวจสอบ

Periodically inspect the switch for any signs of damage, wear, or compromise to the waterproof seal. If any damage is observed, disconnect power and have the switch inspected or replaced by a qualified professional.

5 การแก้ไขปัญหา

5.1 ปัญหาทั่วไป

  • สวิตช์ไม่ตอบสนอง: Check if the main circuit breaker is ON. Verify all wiring connections are secure. If the issue persists, consult a qualified electrician.
  • การดำเนินการเป็นระยะ: This could indicate a loose connection or internal damage. Disconnect power and have the switch inspected by a professional.
  • น้ำเข้า: If water is observed inside the switch or connected enclosure, immediately disconnect power. The waterproof seal may be compromised. The switch must be replaced.

6. ข้อมูลจำเพาะทางเทคนิค

ข้อมูลจำเพาะค่า
หมายเลขรุ่น191510
ยี่ห้อเลอแกรนด์
โหมดการทำงานON-ON-OFF
คะแนนปัจจุบัน6 Amps
ปฏิบัติการฉบับที่tage230 โวลต์
ประเภทการติดต่อเปิดปกติ
ประเภทขั้วต่อเสียบปลั๊ก
ประเภทเทอร์มินัลปุ่ม
ขนาด (กว้าง x ยาว x สูง)3.35 x 3.35 x 1.57 นิ้ว (8.5 x 8.5 x 4 ซม.)
ประเภทวงจร1 ทาง
ประเภทตัวกระตุ้นก้านบานพับ
วัสดุติดต่อโลหะ
การให้คะแนนการคุ้มครองระหว่างประเทศIP54
จำนวนตำแหน่ง3
ประเภทตัวควบคุมปุ่มกด
วิธีการควบคุมสัมผัส
โปรโตคอลการเชื่อมต่อเอ็กซ์-10
สีสีเทา
วัดtage1380 วัตต์
น้ำหนักสินค้า3.52 ออนซ์ (100 กรัม)

7. ข้อมูลการรับประกัน

The Legrand 191510 Plexo Recessed Switch is covered by a standard manufacturer's warranty. For specific details regarding warranty terms, duration, and claims, please refer to the documentation provided with your purchase or visit the official Legrand webไซต์ โปรดเก็บหลักฐานการซื้อไว้เพื่อวัตถุประสงค์ในการรับประกัน

8. การสนับสนุนลูกค้า

For further assistance, technical support, or inquiries regarding the Legrand 191510 Plexo Recessed Switch, please contact Legrand customer service. You can find contact information, FAQs, and additional resources on the official Legrand webเว็บไซต์:

www.legrand.us